Surface mercaptan functionalization of 2D SnS2 to enhance NO2 sensing at room temperature
Source abstract
Abstract
The development of high-performance NO2 gas sensors is crucial for environmental monitoring and human health. Two-dimensional (2D) SnS2 has attracted attention due to its unique structure and optoelectronic properties, yet its practical application is limited by low sensitivity at room temperature. Although mercaptan functionalization can enhance sensing performance, its efficiency is restricted by the limited sulfur vacancy concentration on SnS2 surface. Herein, a vacancy-assisted mercaptan functionalization strategy is proposed. Sulfur vacancies are introduced via mild H2O2 etching, followed by ultrasonic treatment with 3-mercaptopropionic acid (MPA), where mercaptan groups (-SH) are anchored at sulfur vacancy sites. Benefiting from the synergistic effects of defect engineering and surface functionalization, the band structure and surface polarity of SnS2 were effectively modulated. As a result, the SV-SnS2-MPA based sensor exhibits a high response of 52.94 toward 10 ppm NO2 under blue light at room temperature, nearly seven times higher than pristine SnS2, along with excellent stability and selectivity. This work provides an effective strategy for mercaptan functionalization of 2D metal sulfides and highlights its potential for NO2 sensing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · 2D Materials and Applications · Sulfur Compounds in Biology
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (78)
Show source-provided references
1. Outdoor air pollution and asthma10.1016/S0140-6736(14)60617-6 ↗
2. Air pollution characteristics and their relation to meteorological conditions during 2014-2015 in major chinese cities10.1016/j.envpol.2017.01.050 ↗
3. Room-temperature NO2 sensor based on oxygen vacancy-rich SnO nanosheets10.1021/acsanm.5c01114 ↗
4. Metal oxide semiconductors for gas sensing
5. Recent progress on flexible room-temperature gas sensors based on metal oxide semiconductor10.1007/s40820-022-00956-9 ↗
6. 3D micro-combs self-assembled from 2D N-doped In2S3 for room-temperature reversible NO2 gas sensing
7. Highly sensitive and low detection limit NO2 gas sensor based on In2O3 nanoparticles modified peach kernel-like GaN composites10.1016/j.snb.2023.133452 ↗
8. Exploring electrostatic confinement transport in MoS2/WSe2 heterostructure via triple-gated point contact device10.1002/admt.202302200 ↗
9. Recent advances of atomically thin 2D heterostructures in sensing applications10.1016/j.nantod.2021.101287 ↗
10. New developments in gas sensing using various two-dimensional architectural designs10.1016/j.cej.2023.144039 ↗
11. Recent advances in chemoresistive gas sensors using two-dimensional materials10.3390/nano14171397 ↗
12. Recent developments in 2D nanomaterials for chemiresistive-type gas sensors10.1007/s13391-018-0044-z ↗
13. Recent progress in two-dimensional materials: from emerging structures and synthesis approaches to electronic and sensing applications10.1016/j.cej.2025.166133 ↗
14. Recent advances in engineering of 2D layered metal chalcogenides for resistive-type gas sensor10.1002/smll.202404821 ↗
15. Ultrasensitive room-temperature NO2 detection using SnS2/MWCNT composites and accelerated recovery kinetics by UV activation10.1021/acssensors.2c02104 ↗
16. Flexible, 3D SnS2/reduced graphene oxide heterostructured NO2 sensor10.1016/j.snb.2019.127445 ↗
17. Ultrasensitive room temperature ppb-level NO2 gas sensors based on SnS2/rGO nanohybrids with P-N transition and optoelectronic visible light enhancement performance10.1039/C9TC02436K ↗
18. Two-dimensional SnS2 nanoplates with extraordinary high discharge capacity for lithium ion batteries10.1002/adma.200703122 ↗
19. Suspended SnS2 layers by light assistance for ultrasensitive ammonia detection at room temperature
20. Au-modified 3D SnS2 nano-flowers for low-temperature NO2 sensors10.1016/j.snb.2021.130775 ↗
21. Vacancy- and doping-dependent electronic and magnetic properties of monolayer SnS210.1111/jace.16739 ↗
22. Role of surface engineering in advancement of optoelectrochemical sensing platforms10.1016/j.jiec.2025.09.043 ↗
23. Surface functionalization of Ti3C2Tx MXene with highly reliable superhydrophobic protection for volatile organic compounds sensing10.1021/acsnano.0c03896 ↗
24. Patching sulfur vacancies: a versatile approach for achieving ultrasensitive gas sensors based on transition metal dichalcogenides10.1016/j.jcis.2023.06.092 ↗
25. Functionalization of molybdenum disulfide via plasma treatment and 3-mercaptopropionic acid for gas sensors10.3390/nano10091860 ↗
26. Tunable volatile organic compounds sensor by using thiolated ligand conjugation on MoS210.1021/nl502906a ↗
27. 3D self-assembled indium sulfide nanoreactor for in-situ surface covalent functionalization: towards high-performance room-temperature NO2 sensing10.1016/j.jcis.2023.04.157 ↗
28. Controlled doping of vacancy-containing few-layer MoS2 via highly stable thiol-based molecular chemisorption10.1021/acsnano.5b05173 ↗
29. Chemiresistive sensing with chemically modified metal and alloy nanoparticles10.1002/smll.201002232 ↗
30. Effect of oxygen-containing functional groups on the NO2 adsorption and reduction by activated carbon: a density functional theory calculation study10.1021/acs.langmuir.5c02885 ↗
31. Methods and mechanisms of gas sensor selectivity10.1080/10408436.2021.1941752 ↗
32. Stability and sensing enhancement by nanocubic CeO2 with 100 polar facets on graphene for NO2 at room temperature10.1021/acsami.9b18155 ↗
33. Covalent functionalization of monolayered transition metal dichalcogenides by phase engineering10.1038/nchem.2108 ↗
34. Defect-engineered atomically thin MoS2 homogeneous electronics for logic inverters10.1002/adma.201906646 ↗
35. Dual H2O2 production paths over chemically etched MoS2/FeS2 heterojunction: maximizing self-sufficient heterogeneous fenton reaction rate under the neutral condition10.1016/j.apcatb.2022.122307 ↗
36. Fabrication of MoS2 with dual defects of O-doping and S-vacancies for high-efficiency hydrogen production10.1007/s12678-023-00850-x ↗
37. Unraveling the defects introduced on the basal plane of MoS2 monolayers by H2O2 for the hydrogen evolution reaction10.1021/acsaem.5c02263 ↗
38. Highly selective NO2 sensor based on Au/SnS2 nano-heterostructures via visible-light modulation10.1016/j.apsusc.2023.157093 ↗
39. Anomalous frequency trends in MoS2 thin films attributed to surface effects10.1103/PhysRevB.88.075320 ↗
40. Enhanced room-temperature NH3 gas sensing by 2D SnS2 with sulfur vacancies synthesized by chemical exfoliation10.1016/j.snb.2018.02.060 ↗
41. Photo-enhanced gas sensing of SnS2 with nanoscale defects10.1039/C8RA08857H ↗
42. Surface formation pathway of nitrogen- and sulfur-containing organic compounds on ammonium sulfate10.1021/acs.jpca.5c00332 ↗
43. S-vacancies and Ag nanoparticles in SnS2 nanoflakes for ethanol sensing: a combined experimental and theoretical investigation10.1021/acsanm.2c02153 ↗
44. Synthesis of SnS2/SnO2 nano-heterojunctions with increased reactive sites and charge transfer for ultrasensitive NH3 detection10.1016/j.jallcom.2022.168520 ↗
45. Two-dimensional SnS2 materials as high-performance NO2 sensors with fast response and high sensitivity10.1016/j.snb.2017.08.091 ↗
46. X-ray photoelectron spectroscopy sulfur 2p study of organic thiol and disulfide binding interactions with gold surfaces10.1021/la960465w ↗
47. Enhancing adsorption and catalytic activity of marigold-like In2S3 in lithium-sulfur batteries by vacancy modification10.1016/j.cej.2021.131711 ↗
48. Contact-engineered electrical properties of MoS2 field-effect transistors via selectively deposited thiol-molecules
49. Au-Pd modified SnS2 nanosheets for conductometric detection of xylene gas10.1016/j.snb.2021.130907 ↗
50. Au-decorated ZnFe2O4 yolk-shell spheres for trace sensing of chlorobenzene10.1021/acsami.0c00525 ↗
51. Effect of different polyvinylpyrrolidone and 3-mercaptopropionic acid concentrations on structural, morphological, and optical properties of cadmium sulfide quantum dots10.1007/s10854-021-07341-z ↗
52. Identification of the EPR signal of S2− in green ultramarine pigments10.1039/c0cp02970j ↗
53. Plasmonic Au-enabled photoenhanced room temperature NO2 sensing of 2D SnS2-heterostructure via single-step mechanochemical synthesis
54. Doping process of 2D materials based on the selective migration of dopants to the interface of liquid metals10.1002/adma.202104793 ↗
55. Uncovering the key role of the fermi level of the electron mediator in a Z-scheme photocatalyst by detecting the charge transfer process of WO3-metal-gC3N4 (metal = Cu, Ag, Au)10.1021/acsami.5b10613 ↗
56. In-situ mechanochemically tailorable 2D gallium oxyselenide for enhanced optoelectronic NO2 gas sensing at room temperature10.1016/j.jhazmat.2023.131184 ↗
57. Soft exfoliation of 2D SnO with size-dependent optical properties10.1088/2053-1583/aa6efc ↗
58. Density-dependent carrier recombination in MoS2 quantum dots and its implications for luminescence sensing of ammonium hydroxide10.1021/acsanm.0c02818 ↗
59. Photoexcited NO2 enables accelerated response and recovery kinetics in light-activated NO2 gas sensing10.1021/acssensors.1c01694 ↗
60. Liquid-tin-printed two-dimensional SnO for optoelectronic NO2 gas sensing at room temperature10.1039/D3TC02762G ↗
61. Single-step growth of p-type 1D Se/2D GeSexOy heterostructures for optoelectronic NO2 gas sensing at room temperature10.1039/D2TA06255K ↗
62. S.M. Adams, J. Manners, N. Mayne, M.T. Mak, É. Hébrard, Benchmarking photolysis rates with socrates (24.11): species for Earth and exoplanets, (2026). 10.48550/ARXIV.2602.16453.10.5194/gmd-19-5305-2026 ↗
63. Defect-engineered two-dimensional layered gallium sulphide molecular gas sensors with ultrahigh selectivity and sensitivity10.1016/j.apsusc.2021.150188 ↗
64. MoS2 nanosheets sensitized with quantum dots for room-temperature gas sensors10.1007/s40820-020-0394-6 ↗
65. Chemically functionalized 3D graphene hydrogel for high performance gas sensing10.1039/C6TA01426G ↗
66. Ultrasensitive and highly selective NO2 gas sensing of porous MXene nanoribbon assemblies10.1016/j.carbon.2024.119364 ↗
67. Nanorods assembled hierarchical Bi2S3 for highly sensitive detection of trace NO2 at room temperature10.3390/chemosensors12010008 ↗
68. Mesoporous In2O3/ZnO heterogeneous microtubes replicated from waste willow catkins for high response and rapid detection of NO2 gas at low temperature10.1016/j.snb.2023.134880 ↗
69. Humidity-enhanced NH3 sensor based on carbon quantum dots-modified SnS10.1016/j.apsusc.2023.157612 ↗
70. Highly sensitive NO2 response and abnormal P-N sensing transition with ultrathin Mo-doped SnS2 nanosheets10.1016/j.cej.2020.127572 ↗
71. Enhanced NO2 sensing of SnO2/SnS2 heterojunction based sensor10.1016/j.snb.2016.12.125 ↗
72. Low-operating temperature NO2 gas sensors based on hybrid two-dimensional SnS2-reduced graphene oxide10.1016/j.apsusc.2018.08.115 ↗
73. Visible-light activated room temperature NO2 sensing of SnS2 nanosheets based chemiresistive sensors10.1016/j.snb.2019.127455 ↗
74. SnS2 nanograins on porous SiO2 nanorods template for highly sensitive NO2 sensor at room temperature with excellent recovery10.1021/acssensors.8b01526 ↗
75. Oxygen vacancy-rich SnO2/SnS heterojunction nanocomposites for high-performance NO2 gas sensing10.1016/j.jallcom.2026.186378 ↗
76. Self-assembled vertically stacked van der waals In2O3/In2S3 heterojunction for ultra-sensitive room-temperature NO2 gas detection10.1016/j.jcis.2025.139663 ↗
77. Tunable synthesis of 2D bismuth oxyhydroxide and oxysulfide from solid-liquid interfacial reaction for high performance optoelectronic gas sensing
78. Two-dimensional La2CoO4 perovskite oxide enabled by phonon-resonance-driven exfoliation for high-performance gas sensing10.1002/advs.202521819 ↗