Impact of epitaxial strain on oxygen deficiency in Mo-doped strontium ferrite epitaxial thin films
Source abstract
Abstract
The catalytic splitting of H 2 O and CO 2 at moderate temperatures relies on oxides with a suitable concentration of oxygen vacancies, which act as active centers and enable the conversion of CO 2 -to-CO and water splitting to produce hydrogen at lower energy cost. Two approaches can be considered to reduce the operating temperature: the use of new materials and the engineering of their properties through epitaxially stabilized thin films. In this work both approaches are combined by studying SrFe 0.84 Mo 0.16 O 3−δ , grown for the first time as epitaxial thin films. Different oxide substrates (SrTiO3(0 0 1), SrTiO3(1 1 1), and LaAlO3(0 0 1)) were used to elucidate how substrate-induced epitaxy and strain affect the structural stabilization of the perovskite phase and, in particular, the oxygen deficiency, a key parameter for catalytic activity. SEM-EDS, XPS and synchrotron-based XRD and XAS were used to characterise epitaxial growth, the Fe/Mo stoichiometry and oxygen vacancy formation. Fe valence determined from XANES, supported by XPS, indicates that the films grown on SrTiO3 (coherent growth) have the lowest oxygen deficiency, whereas the film grown on LaAlO3 (in-plane lattice expansion) shows enhanced vacancy formation, demonstrating the important role of epitaxial strain in determining the oxygen defect chemistry.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Magnetic Properties and Synthesis of Ferrites · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. CeO2 as a photocatalytic material for CO2 conversion: a review10.1016/j.solener.2022.04.051 ↗
2. Solar thermochemical splitting of CO2 into separate streams of CO and O2 with high selectivity, stability, conversion, and efficiency10.1039/C6EE03776C ↗
3. A review of solar thermochemical CO2 splitting using ceria-based ceramics with designed morphologies and microstructures10.3389/fchem.2019.00601 ↗
4. High-flux solar-driven thermochemical dissociation of CO2 and H2O using nonstoichiometric ceria10.1126/science.1197834 ↗
5. A thermochemical study of ceria: Exploiting an old material for new modes of energy conversion and CO2 mitigation10.1098/rsta.2010.0114 ↗
6. Thermochemical properties of high entropy oxides used as redox-active materials in two-step solar fuel production cycles10.3390/catal12101116 ↗
7. Comparing the solar-to-fuel energy conversion efficiency of ceria and perovskite-based thermochemical redox cycles for splitting H2O and CO210.1016/j.ijhydene.2018.08.137 ↗
8. Thermochemical splitting of CO2 using solution combustion synthesized lanthanum–strontium–manganese perovskites10.1016/j.fuel.2020.119154 ↗
9. Boosting CO2 direct electrolysis by electron doping in Sr2Fe1.5Mo0.5O6-δ double perovskite cathode10.1016/j.jpowsour.2022.230984 ↗
10. Lanthanum manganite-based perovskite as a catalyst for co-production of ethylene and hydrogen by ethane dehydrogenation
11. Praseodymium-doped Sr2TiFeO6-δ double perovskite as a bi-functional electrocatalyst for hydrogen production through water splitting10.1016/j.jece.2022.107609 ↗
12. Double perovskite PrBaCo2O5.5: an efficient and stable electrocatalyst for hydrogen evolution reaction10.1016/j.jpowsour.2019.04.070 ↗
13. Lanthanide based double perovskites: Bifunctional catalysts for oxygen evolution/reduction reactions10.1016/j.ijhydene.2021.02.141 ↗
14. Double perovskite Pr2CoFeO6 thermoelectric oxide: Roles of Sr-doping and micro/nanostructuring10.1016/j.cej.2021.130668 ↗
15. Tuning of band gap of double perovskite halides Rb2CuSbX6 (X = Cl, Br, I) for solar cells and energy harvesting10.1016/j.mseb.2022.116088 ↗
16. Structural phase transition and variation of magnetoresistance in the stoichiometric double perovskite Sr2−yNdyFe1+xMo1−xO6 (0.05 ≤ y ≤ 0.45 and x = y/2)10.1016/j.jssc.2022.123472 ↗
17. Stable lead-free Cs4CuSb2Cl12 layered double perovskite solar cells yielding theoretical efficiency close to 30%10.1016/j.optmat.2022.112676 ↗
18. Tuning of band gap by anion variation of double perovskites K2AgInX6 (X = Cl, Br) for solar cells and thermoelectric applications
19. Study of lead-free double perovskites X2AgBiI6 (X = K, Rb, Cs) for solar cells and thermoelectric applications10.1016/j.jmrt.2022.11.132 ↗
20. Study of new double perovskite halides Rb2Ti(Cl/Br)6 for solar cells and thermoelectric applications
21. Optimisation of high-performance, cobalt-free SrFe1-xMoxO3-δ cathodes for solid oxide fuel cells prepared by spray pyrolysis10.1016/j.renene.2021.12.121 ↗
22. Electrical and electrochemical properties of the Sr(Fe,Co,Mo)O3-δ system as air electrode for reversible solid oxide cells10.1016/j.jpowsour.2019.226895 ↗
23. A novel electrode material for symmetrical SOFCs10.1002/adma.201001044 ↗
24. Perovskite Sr2Fe1.5Mo0.5O6-δ as electrode materials for symmetrical solid oxide electrolysis cells10.1016/j.ijhydene.2010.08.016 ↗
25. Water interaction with B-site (B = Al, Zr, Nb, and W) doped SrFeO3-δ-based perovskite surfaces for thermochemical water splitting applications10.1039/D2CP03931A ↗
26. Green hydrogen production via water splitting using SrFe0.9Mo0.1O3-δ perovskite as a catalyst10.1002/sstr.202500544 ↗
27. Sr2Fe1.5Mo0.5O6 as cathodes for intermediate-temperature solid oxide fuel cells with La0.8Sr0.2Ga0.87Mg0.13O3 electrolyte10.1149/1.3556085 ↗
28. Stabilization of epitaxial α-Fe2O3 thin films grown by pulsed laser deposition on oxide substrates10.1021/acs.jpcc.8b02430 ↗
29. Strain engineering: a pathway for tunable functionalities of perovskite metal oxide films10.3390/nano12050835 ↗
30. Effect of lattice strain on the oxygen vacancy formation and hydrogen adsorption at CeO2(111) surface10.1016/j.physleta.2014.07.006 ↗
31. Tuning perovskite oxides by strain: electronic structure, properties, and functions in (electro)catalysis and ferroelectricity10.1016/j.mattod.2019.03.014 ↗
32. Strain engineering and epitaxial stabilization of halide perovskites10.1038/s41586-019-1868-x ↗
33. Turning a solar cell into a catalyst: (Ag,Cu)(In,Ga)Se2 p–n junction enabling ambient dry reforming of methane10.1016/j.apcatb.2025.126132 ↗
34. The multipurpose X-ray diffraction end-station of the BM25B-SpLine synchrotron beamline at the ESRF10.1016/j.nima.2013.03.019 ↗
35. Larch: an analysis package for XAFS and related spectroscopies10.1088/1742-6596/430/1/012007 ↗
36. Preparation and characterization of stoichiometric CaFeO310.1016/0025-5408(78)90028-4 ↗
37. Structural and elastic properties of LaAlO3 from first-principles calculations
38. Direct observation of polar tweed in LaAlO310.1038/srep27193 ↗
39. X-ray absorption investigation of the valence state and electronic structure of La1−xCaxCoO3−δ in comparison with La1−xSrxCoO3−δ and La1−xSrxFeO3−δ10.1016/j.jssc.2011.09.027 ↗
40. The Fe K-edge X-ray absorption characteristics of La1−xSrxFeO3−δ prepared by solid state reaction10.1016/j.materresbull.2008.11.026 ↗
41. X-ray spectroscopy of (Ba,Sr,La)(Fe,Zn,Y)O3−δ identifies structural and electronic features favoring proton uptake10.1021/acs.chemmater.0c02655 ↗
42. La1−xSrxFeO3−δ perovskite oxide nanoparticles for low-temperature aerobic oxidation of isobutane to tert-butyl alcohol10.1021/acsami.4c15585 ↗
43. Oxidation state and coordination of Fe in minerals: an Fe K-XANES spectroscopic study10.2138/am-2001-5-612 ↗
44. Fe K-edge X-ray absorption spectroscopy of corrosion phases of archaeological iron: results, limitations, and the need for complementary techniques10.1088/1361-648X/ac08b6 ↗
45. Theoretical analysis of Fe K-edge XANES on iron pentacarbonyl10.1021/acsomega.9b03887 ↗
46. X-ray spectroscopic study of BaFeO3 thin films: an Fe4+ ferromagnetic insulator10.1103/PhysRevB.91.115101 ↗
47. Study the oxygen vacancies and Fe oxidation states in CaFeO3−δ perovskite nanomaterial10.1016/j.physb.2021.413415 ↗
48. Structural studies of charge disproportionation and magnetic order in CaFeO310.1103/PhysRevB.62.844 ↗
49. Electronic-structure evolution of SrFeO3-x during topotactic phase transformation10.1088/1361-648X/ac36fd ↗
50. Negative charge-transfer energy in SrFeO3 revisited with hard X-ray photoemission spectroscopy10.1103/PhysRevB.109.235138 ↗
51. A multiplet analysis of Fe K-edge 1s→3d pre-edge features of iron complexes10.1021/ja964352a ↗
52. Determination of the iron oxidation state in earth materials using XANES pre-edge information10.1107/S0909049500021063 ↗
53. Magnetic and structural studies of the multifunctional material SrFe0.75Mo0.25O3−δ10.1021/ic301550m ↗
54. Oxygen nonstoichiometry and defect chemistry of perovskite-structured SrFe1−xMoxO3−δ solid solutions10.1016/j.ssi.2016.05.009 ↗
55. Characterization of the “native” surface thin film on pure polycrystalline iron: a high resolution XPS and TEM study10.1016/j.apsusc.2006.09.047 ↗
56. Strain effects on oxygen vacancy formation energy in perovskites10.1016/j.ssi.2017.09.021 ↗
57. Strain-controlled oxygen vacancy formation and ordering in CaMnO310.1103/PhysRevB.88.054111 ↗
58. Enhancing perovskite electrocatalysis through strain tuning of the oxygen deficiency10.1021/jacs.6b03520 ↗
59. Influence of strain on SrFeO3−δ oxidation, reduction, and water dissociation: insights from ambient pressure X-ray photoelectron spectroscopy10.1016/j.apsusc.2020.146919 ↗