Insights into the charge dynamics at metal oxide/manganate perovskite interfaces from density functional theory
Source abstract
Abstract
Recently, inorganic perovskites (CaMnO3, SrMnO3 and BaMnO3) were proposed as absorbers which could replace hybrid organic–inorganic perovskites in photovoltaic devices. Photovoltaic device operation, in addition to absorption properties of the perovskite, critically depends on the interface characteristics of the perovskite and neighbouring layers, namely charge carrier transport layers. This study, using a theoretical model based on the density functional theory, investigates charge carrier dynamics at the interface of manganate perovskites with some of the most commonly used electron transport layers based on metal oxides (ZnO, TiO2 and SnO2). The study includes the microscopic insights on the effective mass across the interface, electrostatic macroscopic average potential profile of the interface, and most importantly, qualitative approximation of band offsets between the perovskite absorbers and the metal oxide electron transport layers. First-principles simulations of these properties suggest suitability for photovoltaic applications, especially in the case of SnO2/SrMnO3 and SnO2/BaMnO3 heterostructures. These heterostructures with planar architecture are predicted to have low lattice mismatch, enabling epitaxial growth, as well as a suitable type II band offset.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials · Chemical and Physical Properties of Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Solar cell efficiency tables (Version 64)10.1002/pip.3831 ↗
2. Major challenges for commercialization of perovskite solar cells: a critical review10.1016/j.egyr.2025.01.019 ↗
3. Synergistic role of water and oxygen leads to degradation in formamidinium-based halide perovskites
4. Progress in understanding degradation mechanisms and improving stability in organic photovoltaics10.1002/adma.201603940 ↗
5. Impact of H 2 O on organic–inorganic hybrid perovskite solar cells10.1039/C7EE01674C ↗
6. W. Xiang, S. (Frank) Liu, W. Tress, A review on the stability of inorganic metal halide perovskites: challenges and opportunities for stable solar cells, Energy Environ. Sci., 2021, 14, 2090–2113. Doi: 10.1039/D1EE00157D.10.1039/D1EE00157D ↗
7. Z. Yao, W. Zhao, S. (Frank) Liu, Stability of the CsPbI 3 perovskite: from fundamentals to improvements, J. Mater. Chem. A., 2021, 9, 11124–11144. Doi: 10.1039/D1TA01252E.10.1039/D1TA01252E ↗
8. All‐inorganic CsPbX 3 perovskite solar cells: progress and prospects10.1002/anie.201901081 ↗
9. Efficient and stable inorganic perovskite solar cells manufactured by pulsed flash infrared annealing
10. Research progress of Cs-based all-inorganic perovskite solar cells10.3390/en17112671 ↗
11. Inorganic perovskite/organic tandem solar cells with 25.1% certified efficiency via bottom contact modulation10.1038/s41560-025-01742-8 ↗
12. Durable all-inorganic perovskite tandem photovoltaics10.1038/s41586-024-08432-7 ↗
13. Strategies for performance and stability advancement in multicomponent perovskite photovoltaics10.1039/D5TA04375A ↗
14. Measuring metal halide perovskite single cell degradation consistent with module-based conditions10.1039/D3SE01268A ↗
15. Discovery of temperature-induced stability reversal in perovskites using high-throughput robotic learning10.1038/s41467-021-22472-x ↗
16. The effect of multiple ion substitutions on halide ion migration in perovskite solar cells10.1039/D2MA00619G ↗
17. A review of interface engineering characteristics for high performance perovskite solar cells
18. The role of the interfaces in perovskite solar cells10.1002/admi.201901469 ↗
19. The impact of interface and heterostructure on the stability of perovskite-based solar cells10.1063/5.0210109 ↗
20. Resolving interfacial challenges in perovskite solar cells: from defect control to energy band optimization
21. Improving electron transport in the hybrid perovskite solar cells using CaMnO3-based buffer layer10.1016/j.nanoen.2018.01.009 ↗
22. Soft chemistry synthesis of CaMnO3 powders and films10.1016/j.ceramint.2020.04.142 ↗
23. Solution-processed CaMnO3-δ-based all oxide solar cells with high open-circuit voltage
24. Potential of AMnO3 (A=Ca, Sr, Ba, La) as active layer in inorganic perovskite solar cells10.1002/cphc.202200837 ↗
25. The optical properties of strontium manganite thin films prepared by novel phototreatment technique10.1016/j.jallcom.2023.169972 ↗
26. Electron transport layers in thin-film solar cells: Materials, interfaces, and device performance10.1016/j.jpowsour.2025.238882 ↗
27. Improvement of the interfacial contact between zinc oxide and a mixed cation perovskite using carbon nanotubes for ambient-air-processed perovskite solar cells10.1039/D0NJ04656F ↗
28. Advanced capabilities for materials modelling with Quantum ESPRESSO10.1088/1361-648X/aa8f79 ↗
29. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
30. Thermal Contraction and Disordering of the Al(110) Surface10.1103/PhysRevLett.82.3296 ↗
31. Role and effective treatment of dispersive forces in materials: Polyethylene and graphite crystals as test cases10.1002/jcc.21112 ↗
32. Fletcher · 2013
33. Hubbard parameters from density-functional perturbation theory10.1103/PhysRevB.98.085127 ↗
34. M. Peressi, N. Binggeli, A. Baldereschi, Band engineering at interfaces: theory and numerical experiments, Journal of Physics D: Applied Physics, 1998, 31 1273. 10.1088/0022-3727/31/11/002.10.1088/0022-3727/31/11/002 ↗
35. Band offsets in lattice-matched heterojunctions: a model and first-principles calculations for GaAs/AlAs10.1103/PhysRevLett.61.734 ↗
36. Valence-band offsets at strained Si/Ge interfaces10.1103/PhysRevB.44.5572 ↗
37. Y. Wang, D. Zheng, K. Wang, Q. Yang, J. Qian, J. Zhou, S. (Frank) Liu, D. Yang, Lattice Mismatch at the Heterojunction of Perovskite Solar Cells, Angew. Chem. Int. Ed., 2024, 63, e202405878. Doi: 10.1002/anie.202405878.10.1002/anie.202405878 ↗
38. Modeling heterojunctions: a computational chemistry perspective10.1039/D5LF00104H ↗
39. Charge carrier dynamics across the metal oxide/BaTiO3 interfaces toward photovoltaic applications from the theoretical perspective
40. Synthesis and characterization of NiMn2O4 nanoparticles using gelatin as organic precursor10.1016/j.jmmm.2008.02.062 ↗
41. Energetics and structure of stoichiometric SnO2 surfaces studied by first-principles calculations10.1016/S0039-6028(00)00612-9 ↗
42. Exploring the phase Transformation Mechanism of Titanium Dioxide by High Temperature in Situ Method10.1088/1757-899X/493/1/012010 ↗
43. Nonlinear size dependence of anatase TiO2 lattice parameters10.1063/1.2213956 ↗
44. Effect of Ru, Rh, Mo, and Pd Adsorption on the Electronic and Optical Properties of Anatase TiO2(101): a DFT Investigation10.3390/ma12050814 ↗
45. Structure determination of CaMnO3 and CaMnO2.5 by X-ray and neutron methods10.1016/0022-4596(82)90292-4 ↗
46. Heat capacity and lattice dynamics of cubic and hexagonal SrMnO3: Calorimetry and density functional theory simulations10.1103/PhysRevB.75.214307 ↗
47. The crystal structure of α-SrMnO310.1016/0022-4596(81)90059-1 ↗
48. High-pressure Synthesis and Magnetism of the 4 H -BaMnO3 Single Crystal and its 6 H -Type Polymorph10.1021/acs.inorgchem.1c02155 ↗
49. Phase stability of the SrMnO3 hexagonal perovskite system at high pressure and temperature10.1103/PhysRevB.90.214101 ↗
50. The ground states properties and the spin effect on the cubic and hexagonal perovskite manganese oxide BaMnO3: GGA+U calculation10.1016/j.physb.2010.11.018 ↗
51. Comparison of the electron effective mass of the n-type ZnO in the wurtzite structure measured by cyclotron resonance and calculated from first principle theory10.1016/S0921-4526(01)00365-9 ↗
52. Determination of the Electron Masses in Stannic Oxide by Submillimeter Cyclotron Resonance10.1103/PhysRevB.4.4539 ↗
53. Intrinsic electronic defect states of anatase using density functional theory10.1016/j.commatsci.2020.109925 ↗
54. Lattice Energy Reservoir in Metal Halide Perovskites10.1021/accountsmr.5c00047 ↗
55. Understanding and Controlling the Work Function of Perovskite Oxides using Density Functional Theory10.1002/adfm.201600243 ↗
56. Tuning the work function in transition metal oxides and their heterostructures10.1103/PhysRevB.93.235116 ↗
57. Stress and defect Effects on Electron Transport Properties at SnO2/Perovskite Interfaces: a First-Principles Insight10.1021/acsomega.2c01584 ↗
58. Structures and Electronic Properties of Different CH3NH3PbI3/TiO2 Interface: a First-Principles Study10.1038/srep20131 ↗
59. Theoretical analysis on effect of band offsets in perovskite solar cells10.1016/j.solmat.2014.10.036 ↗
60. The influence of the conduction band engineering on the perovskite solar cell performance10.1016/j.rio.2022.100291 ↗