journal article·2026-04Open access

Ligand-controlled self-organization of 1D ZnSe nanocrystals in a model bulk heterojunction solar cell system

Svitlana Sovinska, Paweł Dąbczyński, Mateusz M. Marzec, Jakub Rysz, Krystian Sokołowski, Andrzej Bernasik, Beata Szreniawa, Michael Bredol, Benjamin González-Diaz, Katarzyna Matras-Postołek

Abstract

To overcome the current limitations of organic photovoltaic cells in efficiency and durability, systematic improvements across all mechanistic aspects are essential. This paper examines the impact of incorporating rod-shaped one-dimensional (1D) ZnSe nanocrystals (NCs) with various ligands on the morphology and photovoltaic (PV) performance of a model bulk heterojunction solar cells based on poly[N-9′-heptadecanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzo-thiadia zole)] (PCDTBT) and [6,6]-phenyl C61-butyric acid methyl ester (PC 70 BM). Ligands with aromatic or aliphatic characteristics, binding through amino or thiol groups, were selected to investigate both morphological and electronic effects. We successfully demonstrate control over the self-organization of 1D ZnSe NCs within the active layer of an organic solar cell. 1D ZnSe NCs were added to the donor–acceptor solution PCDTBT/PC 70 BM, and we show that tuning the ZnSe NCs surface stabilizer determines the final 3D film composition of PV devices. The 1D ZnSe NCs were synthesized with a simple hot injection method. The original insulating charge carrier ligands used for the synthesis of 1D ZnSe nanocrystals were replaced partially by non-insulating organic compounds containing the aromatic ring and a alkyl chain. With o-phenylenediamine, a surface-segregated interfacial buffer array of ZnSe NCs formed through self-organization during the spin-coating process of the active layer solution. The morphology of the devices and the distribution of individual compounds in the active layer were studied with Atomic Force Microscopy (AFM) and Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS). These results indicated that ZnSe NCs mixed into the coating solution spontaneously accumulated on the surface of the active layer due to the low surface energy. The introduction of the 1D ZnSe NCs containing a surface modified with o-phenylenediamine in a model bulk heterojunction solar cells of ITO/PEDOT:PSS/PCDTBT:PC70BM/Al resulted in a 20 % improvement of the power conversion efficiency of the photovoltaic cells from 1.87 % to 2.25 % on average. Only in this case, a self-organized buffer array of 1D ZnSe NCs formed in a single step between the polymer and the aluminum metal electrode, likely improving solar efficiency by suppressing charge carrier recombination at the organic/metal interface.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Quantum Dots Synthesis And Properties · TiO2 Photocatalysis and Solar Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Photovoltaic solar energy: conceptual framework10.1016/j.rser.2017.02.081 ↗
2. Recent progress in the study of integrated solar cell-energy storage systems10.1039/D4NR00839A ↗
3. Effects of HTL and ETL thicknesses on the performance of PQT-12/PCDTBT:PC61 BM/ZnO QDs solar cells10.1109/LPT.2020.2991536 ↗
4. Nanocrystals as performance-boosting materials for solar cells10.1039/D3NA01063E ↗
5. Organic-inorganic solar cells: recent developments and outlook
6. Organic-inorganic hybrid solar cells: a comparative review10.1016/j.solmat.2012.07.006 ↗
7. First solar cells based on CdTe nanoparticle/MEH-PPV composites10.1557/JMR.2004.0279 ↗
8. Improved efficiency of hybrid solar cells based on non-ligand-exchanged CdSe quantum dots and poly(3-hexylthiophene)10.1063/1.3280370 ↗
9. Improving the performance of CdS/P3HT hybrid inverted solar cells by interfacial modification10.1016/j.solmat.2011.09.041 ↗
10. Harvest of near infrared light in PbSe nanocrystal-polymer hybrid photovoltaic cells10.1063/1.2201047 ↗
11. High-efficiency polymer-PbS hybrid solar cells via molecular engineering10.1039/C4TA03995E ↗
12. Organic-inorganic hybrid perovskites: game-changing candidates for solar fuel production10.1016/j.nanoen.2020.104647 ↗
13. Nanoparticles: properties, applications and toxicities10.1016/j.arabjc.2017.05.011 ↗
14. Alloy nanoclusters steering enhanced solar water oxidation10.1021/acs.inorgchem.5c02134 ↗
15. Magic-sized nanoclusters-induced cascade tandem charge transfer for solar water oxidation10.1002/smll.202409513 ↗
16. Impact of nanoparticle size and lattice oxygen on water oxidation on NiFeOxHy10.1038/s41929-018-0162-x ↗
17. Non-conjugated polymer regulated photoelectrochemical water oxidation10.1039/D4QI02694B ↗
18. Quantum dot light-emitting devices with electroluminescence tunable over the entire visible spectrum10.1021/nl9002969 ↗
19. Semiconductor nanocrystals: structure, properties, and band gap engineering10.1021/ar9001069 ↗
20. P3HT/ZnS: a new hybrid bulk heterojunction photovoltaic system with very high open circuit voltage10.1016/j.solmat.2008.12.015 ↗
21. Formation and characterization of one-dimensional ZnS nanowires for ZnS/P3HT hybrid polymer solar cells with improved efficiency10.1016/j.apsusc.2018.04.239 ↗
22. Growth of ZnSe nano-needles by pulsed laser deposition and their application in polymer/inorganic hybrid solar cells10.1016/j.tsf.2012.02.037 ↗
23. Hydrothermal synthesis and high photocatalytic activity of 3D Wurtzite ZnSe hierarchical nanostructures10.1021/jp8047345 ↗
24. Hybrid nanorod-polymer solar cells10.1126/science.1069156 ↗
25. Nanorods and nanotubes for solar cells10.1166/jnn.2008.N16 ↗
26. Understanding the effect of surface chemistry on charge generation and transport in poly(3-hexylthiophene)/CdSe hybrid solar cells10.1021/am100938f ↗
27. Synthesis and surface modification of amino-stabilized CdSe, CdTe and InP nanocrystals10.1016/S0927-7757(01)01078-0 ↗
28. Generalized and facile synthesis of semiconducting metal sulfide nanocrystals10.1021/ja0357902 ↗
29. Ligand-exchange dependent properties of hybrid nanocomposites based on luminescent colloidal CdSe nanocrystals in P3HT matrix10.1007/s00396-014-3165-4 ↗
30. Physical origin of the impact of different nanocrystal surface modifications on the performance of CdSe/P3HT hybrid solar cells10.1021/jp2040604 ↗
31. The surface chemistry of colloidal HgSe nanocrystals, toward stoichiometric quantum dots by design10.1021/acs.chemmater.8b02908 ↗
32. Electron transport limitation in P3HT:CdSe nanorods hybrid solar cells10.1021/am4041515 ↗
33. Role of surface modification of CdS nanoparticles on the performance of hybrid photovoltaic devices based on p-phenylenevinylene derivate10.1016/j.physe.2015.01.031 ↗
34. Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer10.1038/nenergy.2017.46 ↗
35. Improved nanoscale Al-doped ZnO with a ZnO buffer layer fabricated by nitrogen-mediated crystallization for flexible optoelectronic devices10.1021/acsanm.9b02571 ↗
36. The effect of ZnS buffer layer on Cu2SnS3 (CTS) thin film solar cells performance: numerical approach10.1016/j.micrna.2022.207198 ↗
37. Analysis of CdSe as an alternative buffer layer for Sb2Se3 solar cells10.1016/j.solener.2023.111990 ↗
38. Influence of doped PEDOT:PSS on the performance of polymer solar cells10.1016/j.solmat.2011.04.040 ↗
39. Self-organized buffer layers in organic solar cells10.1002/adma.200792876 ↗
40. Effects of chain orientation in self-organized buffer layers based on poly(3-alkylthiophene)s for organic photovoltaics10.1021/acsami.7b19174 ↗
41. Roll to roll compatible fabrication of inverted organic solar cells with a self-organized charge selective cathode interfacial layer10.1039/C6TA00391E ↗
42. Atomic-layer-deposited buffer layers for thin film solar cells using earth-abundant absorber materials: a review10.1016/j.solmat.2017.09.044 ↗
43. Synthesis of ZnSe microdisks and nanobelts and their visible-light photocatalytic properties10.1007/s10853-016-0638-5 ↗
44. Synthesis and characterization of wurtzite ZnSe one-dimensional nanocrystals through molecular precursor decomposition by solvothermal method10.1016/j.matchemphys.2004.12.005 ↗
45. Temperature-controlled fragmentation and ripening: synthesis of ZnSe nanorods with variable dimensions and crystal structure starting from ultrathin ZnSe nanowires10.1021/acs.chemmater.0c00441 ↗
46. Synthesis and characterization of ZnSe and ZnSe:Mn nanosheets and microflowers with high photoactive properties by microwave-assisted method10.1016/j.cep.2018.11.022 ↗
47. Valeur · 2012
48. Bulk-like ZnSe quantum dots enabling efficient ultranarrow blue light-emitting diodes10.1021/acs.nanolett.1c02284 ↗
49. Unravelling the size and temperature dependence of exciton lifetimes in colloidal ZnSe quantum dots10.1021/jp5038238 ↗
50. N. T. Loan, N. T. Huyen, U. T. Dieu Thuy, W. S. Chae, N. Q. Liem, ZnSe nanocrystals for pure 470-nm blue emission, Opt. Mater. 167 (2025) 117297.10.1016/j.optmat.2025.117297 ↗
51. Temperature-dependent photoluminescence of ZnSe nanocrystals ball-milled for 0–60 minutes10.1016/j.jlumin.2025.121481 ↗
52. Sensitive Cr3+ sensor based on novel poly(luminol-co-1,8-diaminonaphthalene)/CeO2/MWCNTs nanocomposites10.1039/D4RA00542B ↗
53. Chemical polymerization kinetics of poly-O-phenylenediamine and characterization of the obtained polymer in aqueous hydrochloric acid solution using K2Cr2O7 as oxidizing agent10.1155/2014/520910 ↗
54. Microwave-synthesized CZTS nanoparticles and their surface modification for the model hybrid photovoltaic devices
55. High resolution XPS of organic polymers: the scienta ESCA300 database10.1021/ed070pA25.5 ↗
56. InP/ZnS nanocrystals: coupling NMR and XPS for fine surface and interface description10.1021/ja307124m ↗
57. Synthesis of porous ZnS, ZnO and ZnS/ZnO nanosheets and their photocatalytic properties10.1007/s10853-016-0638-5 ↗
58. Evolutions of morphology and electronic properties of few-layered MoS2 exposed to UVO10.1016/j.rinp.2020.103634 ↗
59. Improving the Morphology of PCDTBT:PC70BM Bulk Heterojunction by Mixed-Solvent Vapor-Assisted Imprinting: Inhibiting Intercalation
60. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
61. Printable highly conductive conjugated polymer sensitized ZnO NCs as cathode interfacial layer for efficient polymer solar cells10.1021/am501001v ↗
62. ZnS shelling as the outermost layer on luminescent nanocrystals: a key strategy for quantum dot light-emitting diodes, advances in Natural Sciences
63. A low-bandgap poly(2,7-carbazole) derivative for use in high-performance solar cells10.1002/adma.200602496 ↗
64. Initial photo-degradation of PCDTBT:PC70BM solar cells studied under various illumination conditions: Role of the hole transport layer10.1016/j.solener.2019.03.020 ↗
65. Effect of thermal annealing on charge transfer states and charge trapping in PCDTBT:PC70BM Solar Cells10.1002/aelm.201500167 ↗
66. Phase separation in PCDTBT:PCBM blends: from Flory–Huggins interaction parameters to ternary phase diagrams10.1007/s10118-020-2424-8 ↗
67. Device performance of emerging photovoltaic materials
68. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
69. Hybrid graphene-metal oxide solution processed electron transport layers for large area high-performance organic photovoltaics10.1002/adma.201304780 ↗
70. Transferable graphene oxide by stamping nanotechnology: electron-transport layer for efficient bulk-heterojunction solar cells10.1002/anie.201209999 ↗