A dry-wet quasi-ALE approach for transition metals: tungsten as a model system
Source abstract
Abstract
• W dry-wet Q-ALE was demonstrated by O 2 plasma and timed oxide removal in 1 M HCl. • The combined approach allows self-limiting oxide growth and damage-free removal. • Etching kinetics and oxide chemistry were studied by ICP-MS and post operando XPS. • ALE achieved 0.8 nm/cycle on W PVD blanket and ALD patterned 300 mm wafers. • Results demonstrate lab-to-fab scalability. A dry-wet Quasi-ALE (Q-ALE) process is demonstrated for tungsten, combining self-limiting O 2 plasma oxidation with timed wet-chemical oxide removal in 1 M HCl solution at room temperature (RT). Inductively coupled plasma mass spectroscopy (ICP-MS) and electrochemical measurements were used to study oxide dissolution kinetics. Quantification revealed an initially high etch rate of the surface that gradually decreased and stabilized to a low background value. This evolution is attributed to the rapid dissolution of the plasma-generated bulk WO 3 , followed by the slower removal of the interfacial suboxide layer. Subsequently, the process reached a steady-state regime characterized by trace residual oxide coverage and a background etch driven by simultaneous reoxidation and metal dissolution. Although the background contribution is low, the removal step is halted before its onset to ensure controlled and selective material removal. These results were complemented by post operando X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM) and conductive atomic force microscopy (C-AFM) measurements. An etch rate of 8 Å/cycle was achieved and validated on both blanket and patterned films deposited by physical vapor deposition (PVD) and atomic layer deposition (ALD) using industrial-scale equipment. This demonstrates the lab-to-fab scalability of the process, thereby enabling angstrom-level precision for advanced semiconductor manufacturing.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Semiconductor materials and devices · Metal and Thin Film Mechanics · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. On the potential of tungsten as next-generation semiconductor interconnects10.1007/s13391-017-1610-5 ↗
2. Tungsten interconnect resistance reduction enabling energy efficient and high performance applications for 2nm node and beyond
3. Tungsten as an Interconnect Material for NextGeneration IC Design
4. How can 3D FeFETs substitute NAND flash for low-latency storage
5. Extending tungsten metallization for next-generation devices
6. Enhanced annealing stability and perpendicular magnetic anisotropy in perpendicular magnetic tunnel junctions using W layer10.1063/1.4983159 ↗
7. β -tungsten : a promising metal for spintronics10.1088/1361-648X/aacc08 ↗
8. Optimization of tungsten β -phase window for spin-orbit-torque magnetic random-access memory
9. Atomic and close-to-atomic scale manufacturing: perspectives and measures10.1088/2631-7990/aba495 ↗
10. Future of plasma etching for microelectronics: challenges and opportunities10.1116/6.0003579 ↗
11. Atomic layer etching: an industry perspective10.1149/2.0021506jss ↗
12. Atomic layer etching at the tipping point: an overview10.1149/2.0061506jss ↗
13. Overview of atomic layer etching in the semiconductor industry
14. Thermal atomic layer etching: Mechanism, materials and prospects10.1016/j.pnsc.2018.11.003 ↗
15. Thermal atomic layer etching: a review
16. Atomic layer etching: rethinking the art of etch10.1021/acs.jpclett.8b00997 ↗
17. Mechanisms of thermal atomic layer etching10.1021/acs.accounts.0c00084 ↗
18. T. Faraz, H. Knoops, B. Macco, A. Mackus, V. Vandalon, E. Kessel, Atomic Limits ALE database, (access year 2025). https://doi.org/10.6100/aledatabase.
19. Modeling of defect generation during plasma etching and its impact on electronic device performance - plasma-induced damage10.1088/1361-6463/aa7523 ↗
20. C. Chan, D.H. van Dorp, S. De Gendt, J.-F. de Marneffe, Halogen impact on MTJ magnetic properties (Manuscript in preparation), (2025).
21. Controlling surface chemical states for selective patterning of CoFeB10.1116/1.5063662 ↗
22. Thermal atomic layer etching of metallic tungsten via oxidation and etch reaction mechanism using O2 or O3 for oxidation and WCl6 as the chlorinating etchant
23. Thermally driven self-limiting atomic layer etching of metallic tungsten using WF6 and O210.1021/acsami.7b19024 ↗
24. 3 and W thermal atomic layer etching using “conversion-fluorination” and “oxidation-conversion-fluorination”
25. Plasma-assisted thermal-cyclic atomic-layer etching of tungsten and control of its selectivity to titanium nitride10.1116/6.0001660 ↗
26. Anisotropic atomic layer etching of W using fluorine radicals/oxygen ion beam10.1002/ppap.201900081 ↗
27. Controlled stepwise wet etching of polycrystalline Mo nanowires10.1002/adfm.202310838 ↗
28. Roughness and uniformity control during wet etching of molybdenum10.4028/www.scientific.net/SSP.314.295 ↗
29. Roughening of single-crystal silicon surface etched by KOH water solution10.1016/S0924-4247(98)00270-2 ↗
30. Controlled cobalt recess for advanced interconnect metallization10.1016/j.mee.2019.111131 ↗
31. Electrochemical atomic layer etching of ruthenium10.1149/1945-7111/ab864b ↗
32. Photo-atomic layer etching of GaAs/AlGaAs nanoheterostructures10.1021/acsami.9b02079 ↗
33. Wet-chemical approaches for atomic layer etching of semiconductors: surface chemistry, oxide removal and reoxidation of InAs (100)10.1149/2.0081506jss ↗
34. Gate-all-around InGaAs nanowire FETS with peak transconductance of 2200μS/μm at 50nm Lg using a replacement Fin RMG flow
35. Scalability of InGaAs gate-all-around FET integrated on 300mm Si platform: demonstration of channel width down to 7nm and Lg down to 36nm
36. Molecular mechanisms of atomic layer etching of cobalt with sequential exposure to molecular chlorine and diketones10.1116/1.5082187 ↗
37. Characterization of thermal gradient effects on a quartz crystal microbalance10.3390/s22197256 ↗
38. A real-time method for improving stability of monolithic quartz crystal microbalance operating under harsh environmental conditions10.3390/s21124166 ↗
39. Etching of III-V materials determined by ICP-MS with Sub-nanometer precision10.1149/2.012401jss ↗
40. Nanoscale etching of III-V semiconductors in acidic hydrogen peroxide solution: GaAs and InP, a striking contrast in surface chemistry10.1016/j.apsusc.2018.09.181 ↗
41. Atomic-scale investigations on the wet etching kinetics of Ge versus SiGe in acidic H2O2 solutions: a post operando synchrotron XPS analysis10.1039/D0TC02763D ↗
42. A synchrotron radiation photoelectron spectroscopy study on atomic-scale wet etching of InAs (111)-A and (111)-B in acidic peroxide solutions: surface chemistry versus kinetics
43. M.J.N. Pourbaix, Atlas of Electrochemical Equilibria in Aqueous Solutions, 1974. https://api.semanticscholar.org/CorpusID:93126068.10.5006/37502 ↗
44. Oxidation of tungsten at room temperature irradiated by oxygen plasma10.1021/acs.jpcc.4c03664 ↗
45. Oxidation of tungsten surface with reactive oxygen plasma10.1016/j.nimb.2005.03.073 ↗
46. The kinetics of oxide film formation on metals and alloys10.1149/1.3071793 ↗
47. Effect of oxygen pressure on the oxidation of tungsten powder10.2320/matertrans1960.3.100 ↗
48. Study of tungsten oxidation in O2∕H2∕N2 downstream plasma10.1116/1.2897316 ↗
49. Effect of postdeposition anneal conditions on defect density of HfO[sub 2] layers measured by wet etching10.1149/1.1802134 ↗
50. Characterization of silicon surface preparation processes for advanced gate dielectrics10.1147/rd.433.0351 ↗
51. Ellipsometric study of dissolution of anodic WO3 Films in aqueous solutions. 2. Reaction mechanism10.1021/jp051102k ↗
52. The anodic dissolution of tungsten10.1149/1.2426620 ↗
53. Effect of pH on the anodic behavior of tungsten effect10.1149/1.1471544 ↗
54. Dissolution kinetics of WO3 in acidic solutions10.1007/s10800-006-9113-3 ↗
55. Oxidation mechanisms of niobium, tantalum, molybdenum and tungsten10.1016/0022-5088(60)90012-6 ↗
56. DAIYS-FUN – FG Surface Science – TU Darmstadt, (n.d.). https://www.mawi.tu-darmstadt.de/of/forschung_of/of_ausstattung/of_daisy_fun/index.en.jsp.
57. XPS and factor analysis study of initial stages of cerium oxide growth on polycrystalline tungsten10.1002/sia.5762 ↗
58. Influence of gaseous environments on beryllium–tungsten and tungsten surfaces investigated by XPS
59. Hierarchically structured, oxygen deficient, tungsten oxide morphologies for enhanced photoelectrochemical charge transfer and stability10.1039/C7TA04118G ↗
60. Spectroscopic understanding of SnO2 and WO3 metal oxide surfaces with advanced synchrotron based; XPS-UPS and near ambient pressure (NAP) XPS surface sensitive techniques for gas sensor applications under operational conditions10.3390/s19214737 ↗
61. Facile radiolytic synthesis of ruthenium nanoparticles on graphene oxide and carbon nanotubes10.1016/j.mseb.2015.12.005 ↗
62. Analysis of amorphous tungsten oxide thin films deposited by magnetron sputtering for application in transparent electronics10.1016/j.apsusc.2021.151151 ↗
63. On the electrochemical behaviour of tungsten: the formation and dissolution of tungsten oxide in sulphuric acid solutions10.1016/0010-938X(80)90123-7 ↗
64. A tensiostatic study of the anodic behaviour of tungsten in acid solutions10.1016/0022-5088(75)90051-X ↗
65. The electrochemical behavior of the tungsten electrode and the nature of the different oxides of the metal10.1021/j150532a003 ↗
66. Chromium, molybdenum and tungsten10.1039/c3ic90005c ↗
67. Hydrolysis equilibria of tungsten(VI) in aqueous sodium chloride solutions to 300 °C10.1021/ic00176a022 ↗
68. A.J. Bard, Standard potentials in aqueous solution, Dekker, New York (N.Y.), 1985.
69. Metrology for Monitoring and Detecting Process Issues in a TSV Module10.1149/2.005406jss ↗
70. GenX 3: the latest generation of an established tool10.1107/S1600576722006653 ↗