journal article·2026-01Open access

Energy level alignment of colloidal quantum dots: A comparative study on hole injection barrier with organic materials

Subeen Kim, Kyung-Geun Lim, Jun Hyung Kim, In-Hye Lee, Mahnmin Choi, Daekwon Shin, Sohee Jeong, Jeong Won Kim

Abstract

Understanding energy level alignment (ELA) at interfaces is essential for optimizing charge injection in colloidal quantum dot (CQD)-based optoelectronic devices. This study compares the ELA behaviour of PbS CQD films with that of conventional organic materials. Ultraviolet photoelectron spectroscopy (UPS) and hole-only device (HOD) measurements reveal that PbS CQDs exhibit early Fermi level pinning within the bandgap, unlike organic materials, where pinning occurs near the HOMO level. This early pinning is attributed to high densities of surface defects and ligand-induced states. The strong downward band bending in PbS films indicates significant space charge accumulation and a negatively charged interface. Despite a higher hole injection barrier (∼1.08 eV), PbS CQD-based HODs exhibit low trap-filled limit voltages and reduced trap densities, implying effective defect passivation. Additionally, strong interfacial dipoles at the CQD/substrate interface influence the energy landscape. These findings highlight the unique interfacial physics of CQDs and offer important guidance for the design of high-performance CQD-based devices.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Emergence of colloidal quantum-dot light-emitting technologies10.1038/nphoton.2012.328 ↗
2. Ultrasensitive solution-cast quantum dot photodetectors10.1038/nature04855 ↗
3. Low-noise multispectral photodetectors made from all solution-processed inorganic semiconductors10.1002/adfm.201402094 ↗
4. Over 15% efficiency PbS quantum-dot solar cells by synergistic effects of three interface engineering: reducing nonradiative recombination and balancing charge carrier extraction
5. Alkyl ammonium iodide-based ligand exchange strategy for high-efficiency organic-cation perovskite quantum dot solar cells10.1038/s41560-024-01450-9 ↗
6. Energy level modification in lead sulfide quantum dot thin films through ligand exchange10.1021/nn500897c ↗
7. Energy level tuned indium arsenide colloidal quantum dot films for efficient photovoltaics10.1038/s41467-018-06399-4 ↗
8. Solvation shifts the band-edge position of colloidal quantum dots by nearly 1 ev10.1021/jacs.4c00402 ↗
9. Revisiting the valence and conduction band size dependence of PbS quantum dot thin films10.1021/acsnano.5b06833 ↗
10. Quantum-dot-sensitized solar cell with unprecedentedly high photocurrent10.1038/srep01050 ↗
11. Electronic structure of PbS colloidal quantum dots on indium tin oxide and titanium oxide10.1021/jp508737r ↗
12. An efficient organic and inorganic hybrid interlayer for high performance inverted red cadmium-free quantum dot light-emitting diodes10.1039/D1NA00716E ↗
13. Solution-processable li-doped transition metal oxide hole-injection layer for highly efficient quantum-dot light-emitting diodes10.1039/D1TC06117H ↗
14. Efficient hole injection from indium tin oxide in quantum-dot light-emitting diodes
15. Energy level alignment at organic/metal interfaces studied by UV photoemission10.1016/S0379-6779(98)80075-1 ↗
16. Calculating the universal energy-level alignment of organic molecules on metal oxides10.1002/adfm.201201412 ↗
17. Universal energy level tailoring of self-organized hole extraction layers in organic solar cells and organic–inorganic hybrid perovskite solar cells10.1039/C5EE03560K ↗
18. Mapping energy levels for organic heterojunctions
19. Slope parameters of the barrier heights of metal-organic contacts10.1063/1.2178473 ↗
20. Induced density of states model for weakly-interacting organic semiconductor interfaces10.1016/j.orgel.2006.07.006 ↗
21. Universal energy-level alignment of molecules on metal oxides10.1038/nmat3159 ↗
22. Study of energy level alignment at weakly interacting small organic molecular thin film interfaces: the validity of classical model from inorganics10.1063/1.5054913 ↗
23. Organic semiconductor density of states controls the energy level alignment at electrode interfaces10.1038/ncomms5174 ↗
24. Fermi level pinning by gap states in organic semiconductors10.1103/PhysRevLett.110.036803 ↗
25. Fermi level shifts of organic semiconductor films in ambient air10.1021/acsami.4c13674 ↗
26. Molecularly-anchored single PbS quantum dots as resonant tunnelling transistors10.1039/D4NR04703F ↗
27. Eliminating fermi-level pinning in PbS quantum dots using an alumina interfacial layer10.1039/C5TC03945B ↗
28. Charge percolation pathways guided by defects in quantum dot solids10.1021/acs.nanolett.5b00454 ↗
29. Molecular oxygen induced in-gap states in PbS quantum dots10.1021/acsnano.5b04677 ↗
30. Tolerance of intrinsic defects in PbS quantum dots10.1021/acs.jpclett.5b02202 ↗
31. Open-circuit voltage deficit, radiative sub-bandgap states, and prospects in quantum dot solar cells10.1021/acs.nanolett.5b00513 ↗
32. Quantum-dot light-emitting diodes with fermi-level pinning at the hole-injection/hole-transporting interfaces10.1007/s12274-022-4260-3 ↗
33. Double-type-i charge-injection heterostructure for quantum-dot light-emitting diodes10.1039/D1MH00859E ↗
34. Electron transfer at quantum dot–metal oxide interfaces for solar energy conversion10.1021/acsnanoscienceau.2c00015 ↗
35. Double-sided junctions enable high-performance colloidal-quantum-dot photovoltaics10.1002/adma.201506213 ↗
36. Surface band bending and carrier dynamics in colloidal quantum dot solids10.1039/D1NR05436H ↗
37. Metal halide solid-state surface treatment for high efficiency PbS and PbSe QD solar cells10.1038/srep09945 ↗
38. Suppression of hydroxylation on the surface of colloidal quantum dots to enhance the open-circuit voltage of photovoltaics10.1039/C9TA12598A ↗
39. Influence of the metal phthalocyanine molecular orientation on charge separation at the organic donor/acceptor interface10.1039/D0TC04895J ↗
40. Effect of contamination on the electronic structure and hole-injection properties of moo3/organic semiconductor interfaces10.1063/1.3374333 ↗
41. Photoelectron spectroscopy of polarons in molecular semiconductors
42. Energy level alignment at a charge generation interface between 4,4'-bis(n-phenyl-1-naphthylamino)biphenyl and 1,4,5,8,9,11-hexaazatriphenylene-hexacarbonitrile
43. The impact of local work function variations on fermi level pinning of organic semiconductors10.1021/jp401919z ↗
44. The influence of ligands passivation on strength of fermi level pinning in the quantum dots interface10.1016/j.apsusc.2024.160235 ↗
45. The influence of exposed surface on trap state of PbS quantum dots10.1016/j.spmi.2020.106616 ↗
46. Electronic characteristics of PbS quantum dots passivated by halides on different surfaces10.1016/j.apsusc.2021.150736 ↗
47. Gradient-band-gap strategy for efficient solid-state PbS quantum-dot sensitized solar cells10.1039/C9NR00324J ↗
48. Gate voltage adjusting PbS-I quantum-dot-sensitized ingazno hybrid phototransistor with high-sensitivity
49. Interface engineering in organic electronics: Energy-level alignment and charge transport10.1002/smsc.202000015 ↗
50. Reduced surface trap states of PbS quantum dots by acetonitrile treatment for efficient SnO2-based PbS quantum dot solar cells10.1021/acsomega.4c00208 ↗
51. Temperature dependent behaviour of lead sulfide quantum dot solar cells and films10.1039/C6EE01577H ↗
52. Optimizing surface chemistry of PbS colloidal quantum dot for highly efficient and stable solar cells via chemical binding10.1002/advs.202003138 ↗
53. Improvement of dynamic performance and detectivity in near-infrared colloidal quantum dot photodetectors by incorporating conjugated polymers10.3390/molecules27217660 ↗
54. Unraveling the hole injection mechanism of organic/quantum-dot heterointerfaces10.1016/j.device.2023.100061 ↗
55. Revisiting hole injection in quantum dot light-emitting diodes10.1002/adfm.202305732 ↗