journal article·2020-03

Modulable hysteresis behavior controlled by water-promoted decomposition in a single CH3NH3PbI3 micro/nanowire

Zhen Hong, Hongying Quan, Baochang Cheng

Publisher page

Abstract

Abstract The instability of hybrid organic-inorganic perovskites (HOIP) in environment, especially in high humidity causes different conductance that should be addressed to improve its large-scale application and development. Here, the electrical transport of an individual CH3NH3PbI3 micro/nanowire-based two-terminal device with encapsulating different ends was investigated in a condensed water environment. For an unencapsulated device, linear I-V curve transforms first into two symmetrical counterclockwise hysteresis loops with positive resistive switching (RS) feature, and eventually converts into two symmetrical clockwise hysteresis loops with negative RS feature. For the device encapsulated at one end, the linear I-V curve first transforms into two symmetrical counterclockwise hysteresis loops with positive RS behavior, and then converts into two antisymmetric hysteresis loops with a bipolar RS feature. The origin of modulable hysteresis with different RS characteristics is mainly from the decomposition-induced decrease of surface states and formation of PbI2 and structure defects. As a consequence, the electrical field-triggered filling and emptying of traps in different regions dominate the adjustable performance of electrical transport. The controllable electrical transport can not only demonstrate clearly that condensed water can promote the decomposition of CH3NH3PbI3, but also verify that the hysteresis behavior with different RS memory effect originate from the decomposition-induced traps.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Advanced Memory and Neural Computing · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells10.1021/nl400349b ↗
2. Study on the stability of CH3NH3PbI3 films and the effect of post-modification by aluminum oxide in all-solid-state hybrid solar cells10.1039/C3TA13606J ↗
3. Perovskite solar cell stability in humid air: partially reversible phase transitions in the PbI2-CH3NH3I-H2O system10.1002/aenm.201600846 ↗
4. Investigation of CH3NH3PbI3 degradation rates and mechanisms in controlled humidity environments using in situ techniques10.1021/nn506864k ↗
5. Intrinsic thermal instability of methylammonium lead trihalide perovskite10.1002/aenm.201500477 ↗
6. Encapsulation for long-term stability enhancement of perovskite solar cells10.1016/j.nanoen.2016.09.041 ↗
7. In situ observation of heat-induced degradation of perovskite solar cells10.1038/nenergy.2015.12 ↗
8. Humidity resistant fabrication of CH3NH3PbI3 perovskite solar cells and modules10.1016/j.nanoen.2017.06.039 ↗
9. Turning a disadvantage into an advantage: synthesizing high-quality organometallic halide perovskite nanosheet arrays for humidity sensors10.1039/C6TC05165K ↗
10. Giant humidity effect on hybrid halide perovskite microstripes: reversibility and sensing mechanism10.1021/acsami.9b07751 ↗
11. Photoinduced degradation of methylammonium lead triiodide perovskite semiconductors10.1039/C6TA06497C ↗
12. Atomistic origins of high-performance in hybrid halide perovskite solar cells10.1021/nl500390f ↗
13. A layered hybrid perovskite solar-cell absorber with enhanced moisture stability10.1002/anie.201406466 ↗
14. Light-induced anomalous resistive switches based on individual organic-inorganic halide perovskite micro-/nanofibers10.1002/aelm.201800206 ↗
15. Interface state-induced negative differential resistance observed in hybrid perovskite resistive switching memory10.1021/acsami.8b07850 ↗
16. Transformation of the excited state and photovoltaic efficiency of CH3NH3PbI3 perovskite upon controlled exposure to humidified air10.1021/ja511132a ↗
17. Reproducible fabrication of efficient perovskite-based solar cells: X-ray crystallographic studies on the formation of CH3NH3PbI3 layers10.1246/cl.140074 ↗
18. Influence of moisture on the preparation, crystal structure, and photophysical properties of organohalide perovskites10.1039/C4CC05231E ↗
19. Morphological control for high performance, solution-processed planar heterojunction perovskite solar cells10.1002/adfm.201302090 ↗
20. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
21. Moisture assisted perovskite film growth for high performance solar cells10.1063/1.4901510 ↗
22. Investigation of the interaction between perovskite films with moisture via in situ electrical resistance measurement10.1021/acsami.5b06268 ↗
23. Low-voltage, optoelectronic CH3NH3PbI3-xClx memory with integrated sensing and logic operations10.1002/adfm.201800080 ↗
24. Pseudohalide-induced 2D [CH3NH3]2PbI2[SCN]2 perovskite for ternary resistive memory with high performance10.1002/smll.201703667 ↗
25. Resistive switching behavior in organic-inorganic hybrid CH3NH3PbI3-xClx perovskite for resistive random access memory devices10.1002/adma.201502889 ↗
26. Bright light-emitting diodes based on organometal halide perovskite10.1038/nnano.2014.149 ↗
27. Conversion from unipolar to bipolar resistance switching by inserting Ta2O5 layer in Pt/TaOx/Pt cells10.1063/1.3587809 ↗
28. Unipolar resistive switching behavior of Pt/LixZn1−xO/Pt resistive random access memory devices controlled by various defect types10.1063/1.4766725 ↗
29. NIR Schottky photodetectors based on individual single-crystalline GeSe nanosheet10.1021/am402550s ↗
30. State of the art of metal oxide memristor devices10.1515/ntrev-2015-0029 ↗
31. Review of recent progress in chemical stability of perovskite solar cells10.1039/C4TA04994B ↗
32. Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers10.1038/nnano.2015.230 ↗
33. The effect of moisture on the structures and properties of lead halide perovskites: a first-principles theoretical investigation10.1039/C6CP01994C ↗
34. Defect migration in methylammonium lead iodide and its role in perovskite solar cell operation10.1039/C5EE01265A ↗
35. Materials processing routes to trap-free halide perovskites10.1021/nl502612m ↗
36. Resistive switching properties through iodine migrations of a hybrid perovskite insulating layer10.1002/admi.201601035 ↗
37. Ionic transport in hybrid lead iodide perovskite solar cells10.1038/ncomms8497 ↗
38. Grain boundary dominated ion migration in polycrystalline organic-inorganic halide perovskite films10.1039/C6EE00413J ↗
39. Ion migration in organometal trihalide perovskite and its impact on photovoltaic efficiency and stability10.1021/acs.accounts.5b00420 ↗
40. Modeling for bipolar resistive memory switching in transition-metal oxides10.1103/PhysRevB.82.155321 ↗
41. Resistive switching in transition metal oxides10.1016/S1369-7021(08)70119-6 ↗
42. Nonvolatile resistive switching in Pt/LaAlO3/SrTiO3 heterostructures
43. The resistive switching in TiO2 films studied by conductive atomic force microscopy and kelvin probe force microscopy10.1063/1.4818119 ↗
44. Coexistence of high performance resistance and capacitance memory based on multilayered metal-oxide structures10.1038/srep02482 ↗
45. Tunable hysteresis behaviour related to trap filling dependence of surface barrier in an individual CH3NH3PbI3 micro/nanowire10.1039/C8NR08934E ↗
46. Femtosecond time-resolved transient absorption spectroscopy of CH3NH3PbI3 perovskite films: evidence for passivation effect of PbI210.1021/ja504632z ↗
47. Atomistic origins of CH3NH3PbI3 degradation to PbI2 in vacuum10.1063/1.4916821 ↗
48. Qualifying composition dependent p and n self-doping in CH3NH3PbI3
49. Controllable switching properties in an individual CH3NH3PbI3 micro/nanowire-based transistor for gate voltage and illumination dual-driving non-volatile memory10.1039/C9TC00382G ↗