journal article·2014-08

Sulfur passivation of InSb(100) surfaces: Comparison of aqueous and alcoholic ammonium sulfide solutions using X-ray photoemission spectroscopy

Tatiana V. Lvova, Aleksandr L. Shakhmin, Irina V. Sedova, Mikhail V. Lebedev

Publisher page

Abstract

Abstract The chemical composition and the electronic properties of the n-InSb(1 0 0) surface treated with ammonium sulfide dissolved in water or in 2-propanol has been studied by X-ray photoemission spectroscopy. The solvent determines the mechanism of chemical reaction between InSb(1 0 0) surface and sulfide solution. The variation of the solvent leads to variations in chemical composition and electronic structure of the final sulfide layers. Aqueous sulfide solution withdraws antimony atoms from the InSb(1 0 0) surface very fast due to solubility of antimony sulfides, whereas after treatment with alcoholic sulfide solution the antimony sulfides remain on the surface. The Fermi level at the InSb(1 0 0)/passivation layer interface occurs usually deeply in the conduction band of semiconductor and its position depends on the time of sulfur treatment. However, after prolonged treatment with aqueous sulfide solution and surface depletion with antimony the Fermi level is found in the valence band. Although both solutions remove the native oxide layer, the residual oxygen content is lower after treatment with the solution of ammonium sulfide in 2-propanol.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and interfaces · Chalcogenide Semiconductor Thin Films · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Infrared detectors: status and trends10.1016/S0079-6727(02)00024-1 ↗
2. Indium antimonide (InSb) focal plane array (FPA) detection for near-infrared imaging microscopy10.1366/0003702944924899 ↗
3. Overview of antimonide based III–V semiconductor epitaxial layers and their applications at the center for quantum devices10.1051/epjap:2003056 ↗
4. Heterogeneous InSb quantum well transistors on silicon for ultra-high speed, low power logic applications10.1049/el:20071335 ↗
5. Giant, level-dependent g factors in InSb nanowire quantum dots10.1021/nl901333a ↗
6. Uncooled high-speed InSb field-effect transistors10.1063/1.114063 ↗
7. Opportunities and challenges of III–V nanoelectronics for future high-speed, low-power logic applications
8. Wet etching of InSb surfaces in aqueous solutions: Controlled oxide formation10.1016/j.apsusc.2013.03.063 ↗
9. Cleaning chemistry of InSb(100) molecular beam epitaxy substrates10.1063/1.332158 ↗
10. Structure and composition of chemically prepared and vacuum annealed InSb(001) surfaces10.1016/j.apsusc.2006.03.068 ↗
11. Characterization of oxide desorption from InSb(100) substrates10.1116/1.589151 ↗
12. Oxide-free InSb(100) surfaces by molecular hydrogen cleaning10.1063/1.2162702 ↗
13. Oxide removal and selective etching of In from InSb(100) with TiCl410.1021/jp204408n ↗
14. Controlled oxide removal and surface morphology on InSb(100) using gas phase HF/H2O10.1021/jp110151y ↗
15. Band offsets of high K gate oxides on III–V semiconductors10.1063/1.2213170 ↗
16. A. (NH4)2Sx-treated InSb(001) surface studied by using X-ray photoelectron spectroscopy, low-energy electron diffraction, and inverse photoemission spectroscopy10.1116/1.581602 ↗
17. Reconstruction of the InSb(111)In surface as a result of sulfur adsorption10.1134/S1063782607050077 ↗
18. Chemical analysis of a sulfur-treated InSb(111)A surface by XPS10.1002/sia.3283 ↗
19. Surface electronic properties of clean and S-terminated InSb(001) and (111)B10.1063/1.3000567 ↗
20. Optimization of the ammonium sulfide (NH4)2S passivation process on InSb(111)A10.1116/1.4719961 ↗
21. Chemical passivation of InSb(100) substrates in aqueous solutions of sodium sulfide10.1134/S106378261305014X ↗
22. Dramatic enhancement in the gain of a GaAs/AlGaAs heterostructure bipolar transistor by surface chemical passivation10.1063/1.98877 ↗
23. Interface of anodic sulfide-oxide on n-type InSb10.1007/BF00323688 ↗
24. Adsorption state of hydrogen sulfide on the GaAs(001)−(4×2) surface10.1116/1.580448 ↗
25. Solvent effect on the properties of sulfur passivated GaAs10.1116/1.588827 ↗
26. Electronic properties of GaAs(100) surface passivated in alcoholic sulfide solutions10.1016/S0169-4332(98)00189-5 ↗
27. Effect of surface treatment with different sulfide solutions on the ultrafast dynamics of photogenerated carriers in GaAs(100)10.1016/j.apsusc.2012.09.076 ↗
28. Sulfur passivation of InGaAs/AlGaAs SQW laser (977nm) facets in alcohol-based solutions10.1016/S0921-5107(96)01817-X ↗
29. Reduction of 1/f carrier noise in InGaAsP/InP heterostructures by sulphur passivation of facets10.1088/0268-1242/12/7/004 ↗
30. Electrically pumped InGaAsP-InP microring optical amplifiers and lasers with surface passivation10.1109/LPT.2005.857596 ↗
31. Facet-passivation processes for the improvement of Al-containing laser diodes10.1109/JLT.2005.861916 ↗
32. Effects of sulfur treatment on electrical and optical performance of InGaN/GaN multiple-quantum-well blue light-emitting diodes10.1063/1.1355990 ↗
33. Sulfur passivation and contact methods for GaAs nanowire solar cells10.1088/0957-4484/22/22/225402 ↗
34. Passivation of infrared photodiodes with alcoholic sulfide solution10.1134/S1063782611040142 ↗
35. Surface core-level shifts of 4d states of (110) cleaved InSb10.1088/0022-3719/16/2/005 ↗
36. InSb(100) reconstructions probed with core-level photoemission10.1103/PhysRevB.39.1730 ↗
37. X-ray photoemission study of the initial oxidation of the cleaved (110) surfaces of GaAs, GaP and InSb10.1016/0039-6028(79)90462-X ↗
38. X-ray photoelectron spectroscopic studies of sulfates and bisulfates interpreted by Xα and band structure calculations10.1002/(SICI)1096-9918(200004)29:4<265::AID-SIA739>3.0.CO;2-3 ↗
39. Adsorption and reaction of sulfur dioxide with Cu(110) and Cu(110)-p(2×1)-O10.1063/1.1450545 ↗
40. Atomic subshell photoionization cross sections and asymmetry parameters: 1≤Z≤10310.1016/0092-640X(85)90016-6 ↗
41. A comparative study of GaSb(100) surface passivation by aqueous and nonaqueous solutions10.1063/1.1613994 ↗
42. Sulfur passivation of GaSb(100) surfaces: Comparison of aqueous and alcoholic sulfide solutions using synchrotron radiation photoemission spectroscopy10.1021/jp401942p ↗
43. Measurements of heat of formation of GaP, InP, GaAs, InAs, GaSb and InSb10.2320/matertrans1989.35.596 ↗
44. Calculations of electron inelastic mean free paths. III. Data for 15 inorganic compounds over the 50–2000eV range10.1002/sia.740171305 ↗
45. Reaction of I2 with the (001) surfaces of GaAs, InAs, and InSb. I. Chemical interaction with the substrate10.1103/PhysRevB.54.2101 ↗