X-ray photoelectron spectroscopic study of direct reforming catalysts Ln0.5Sr0.5Ti0.5Mn0.5O3±d (Ln = La, Nd, and Sm) for high temperature-operating solid oxide fuel cell
Source abstract
Abstract
Abstract Chemical states of lanthanide doped perovskite for direct reforming anode catalysts, Ln0.5Sr0.5Ti0.5Mn0.5O3±d (Ln = La, Nd, and Sm) have been studied by X-ray Photoelectron Spectroscopy (XPS) in order to determine the effects of various lanthanide substitution in complex perovskites for high temperature-operating solid oxide fuel cells (HT-SOFC). The charge state of lanthanide ions remained at 3+ and the binding energies of the lanthanide ions in Ln0.5Sr0.5Ti0.5Mn0.5O3±d were located in a relatively lower range compared to those of conventional lanthanide oxides. Mn and Ti were regarded as charge compensation components in Ln0.5Sr0.5Ti0.5Mn0.5O3±d; Mn was more influential than Ti. In the cases of substituting Nd and Sm into Ln0.5Sr0.5Ti0.5Mn0.5O3±d, some portion of Ti showed metallic behavior; the specific Mn satellite peak indicating an electro-catalytic effect had occurred. Three types of oxygen species comprised of lattice oxygen, carbonate species, and adsorbed oxygen species were observed in Ln0.5Sr0.5Ti0.5Mn0.5O3±d from the O 1s spectra; a high portion of lattice oxygen was observed in both Nd0.5Sr0.5Ti0.5Mn0.5O3±d (NSTM) and Sm0.5Sr0.5Ti0.5Mn0.5O3±d (SSTM). In various respects, NSTM and SSTM will be desirable reforming catalysts and anode candidates for high temperature solid oxide fuel cell.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. A review of anode materials development in solid oxide fuel cells10.1023/B:JMSC.0000034135.52164.6b ↗
2. Development of Ni/Y2O3-ZrO2 cermet anodes for solid oxide fuel cells10.1179/026708304225019957 ↗
3. Advanced anodes for high-temperature fuel cells10.1038/nmat1040 ↗
4. The poisoning effect of sulfur-containing impurity gas on a SOFC anode: Part I. Dependence on temperature, time, and impurity concentration10.1016/S0167-2738(00)00653-6 ↗
5. Redox cycling of Ni-based solid oxide fuel cell anodes: a review10.1002/fuce.200600028 ↗
6. Effects of coal syngas and H2S on the performance of solid oxide fuel cells: single-cell tests10.1016/j.jpowsour.2005.09.055 ↗
7. Sulfur poisoning and regeneration of Ni-based anodes in solid oxide fuel cells10.1149/1.2404779 ↗
8. Electrodeposition of Cu into a highly porous Ni/YSZ cermet10.1149/1.2208908 ↗
9. Feasibility of liquid hydrocarbon fuels for SOFC with Ni–ScSZ anode10.1016/j.jpowsour.2007.04.042 ↗
10. A solid oxide fuel cell operating on hydrogen sulfide (H2S) and sulfur-containing fuels10.1016/j.jpowsour.2004.03.061 ↗
11. LaCrO3-based anodes: stability considerations10.1016/S0378-7753(03)00099-5 ↗
12. The catalytic effect of impregnated (La, Sr)(Ti, Mn)O3±δ with CeO2 and Pd as potential anode materials in high temperature solid oxide fuel cells10.1016/j.ijhydene.2012.07.064 ↗
13. Propane reforming on Ni–Ru/GDC catalyst: H2 production for IT-SOFCs under SR and ATR conditions10.1016/j.apcata.2007.10.006 ↗
14. Direct oxidation of dry methane on nanocrystalline Ce0.8Gd0.2O2-δ/Pt anodes10.1016/S1566-7367(03)00117-1 ↗
15. Cu-Ni cermet anodes for direct oxidation of methane in solid-oxide fuel cells10.1149/1.1445170 ↗
16. A redox-stable efficient anode for solid-oxide fuel cells10.1038/nmat871 ↗
17. Investigation of microstructural and electrochemical properties of impregnated (La,Sr)(Ti,Mn)O3±δ as a potential anode material in high-temperature solid oxide fuel cells10.1021/cm2007318 ↗
18. Structural, thermal and electrical conductivity characteristics of Ln0.5Sr0.5Ti0.5Mn0.5O3±d (Ln: La, Nd and Sm) complex perovskites as anode materials for solid oxide fuel cell10.1016/j.jssc.2015.02.001 ↗
19. Glycine-nitrate combustion synthesis of oxide ceramic powders10.1016/0167-577X(90)90003-5 ↗
20. La0.4Sr0.6Ti1-xMnxO3−δ perovskites as anode materials for solid oxide fuel cells
21. Preparation, surface state and band structure studies of SrTi(1−x)Fe(x)O(3−δ) (x=0-1) perovskite-type nano structure by X-ray and ultraviolet photoelectron spectroscopy10.1016/j.susc.2011.12.013 ↗
22. XPS studies of chemically etched surfaces of (La,Sr)(Al,Ta)O3 single crystals10.1016/S0925-8388(03)00424-9 ↗
23. X-ray photoelectron spectroscopy study on sintered Pb1−xLaxTiO3 ferroelectric ceramics10.1016/j.elspec.2006.11.051 ↗
24. Electronic structure of lanthanum perovskites with 3d transition elements10.1103/PhysRevB.22.5730 ↗
25. X-ray photoelectron spectroscopy of Sm-doped layered perovskite for intermediate temperature-operating solid oxide fuel cell10.1016/j.apsusc.2013.10.107 ↗
26. An X-ray photoelectron spectroscopy study on electron structure of some Ln-containing (Ln=La, Pr, Nd and Gd) oxide crystals10.1016/S0925-8388(02)01064-2 ↗
27. X-ray photoelectron spectroscopy analysis of (Ln1−xSrx)CoO3−δ (Ln: Pr, Nd and Sm)10.1016/j.apsusc.2011.08.064 ↗
28. X-ray photoelectron spectroscopic studies of Ba0.5Sr0.5Co0.8Fe0.2O3−δ cathode for solid oxide fuel cells10.1016/j.ijhydene.2008.10.046 ↗
29. In situ high temperature X-ray photoelectron spectroscopy study of barium strontium iron cobalt oxide10.1016/j.memsci.2011.08.006 ↗
30. Systematic x-ray photoelectron spectroscopic study of La1−xSrx-based perovskite-type oxides10.1002/sia.1227 ↗
31. Structure of SrCo0.5Fe0.5O3–δ-based composites prepared by sol-gel and mechanochemical processes10.1134/S0020168509080160 ↗
32. Investigation of surface Sr segregation in model thin film solid oxide fuel cell perovskite electrodes10.1039/C1EE02762J ↗
33. Effects of manganese substitution at the B-site of lanthanum-rich strontium titanate anodes on fuel cell performance and catalytic activity10.1016/j.ceramint.2013.01.060 ↗
34. XPS investigation of surface properties of Ba(1-x)SrxTiO3 powders prepared by low temperature aqueous synthesis10.1016/S0955-2219(98)00371-9 ↗
35. X-ray photoelectron spectroscopy of titanium tetrahalide vapors10.1063/1.436571 ↗
36. Impedance spectroscopy analysis of La1-xSrxMnO3-yttria-stabilized zirconia electrode kinetics10.1016/0013-4686(94)00361-4 ↗
37. Synthesis and Characterization of (La0.75Sr0.25) Cr0.5Mn0.5O3–δ, a redox-stable, efficient perovskite anode for SOFCs10.1149/1.1639161 ↗
38. Oxygen in catalysis on transition metal oxides10.1080/03602457908065099 ↗