Surface oxygen vacancy regulation via Li-doped in MOF-derived mesoporous TiO2 for printable mesoscopic perovskite solar cells
Source abstract
Abstract
The mesoporous TiO 2 displays low conductivity and abundant oxygen vacancies (OVs) defects, leading to reduced carrier extraction and affecting the power conversion efficiency (PCE) of perovskite solar cells (PSCs). In this study, we investigate the electron transport layer of mesoporous TiO 2 derived from Ti-MOFs with Li-doped, employing a strategy to regulate the OVs on the TiO 2 surface to enhance device performance. Experimental results demonstrate that Li doping increases the conductivity of TiO 2 , improves the energy level alignment between the TiO 2 and perovskite interfaces, and alleviates the residual stress in the perovskite. Theoretical calculations indicate that Li doping can inhibit the formation of OVs, reduce the band gap of TiO 2 , and decrease the surface energy of the interface, thereby enhancing carrier extraction. Ultimately, carbon-based printable mesoscopic PSC by Li-doped achieved a champion PCE of 18.07 % and improved long-term stability.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Long-term operating stability in perovskite photovoltaics10.1038/s41578-023-00582-w ↗
2. Molecular engineering of contact interfaces for high-performance perovskite solar cells10.1038/s41578-022-00503-3 ↗
3. Electron transport improvement of perovskite solar cells via intercalation of Na doped TiO2 from metal-organic framework MIL-125(Ti)10.1016/j.apsusc.2021.151735 ↗
4. Methods for passivating defects of perovskite for inverted perovskite solar cells and modules
5. Advances in the application of perovskite materials10.1007/s40820-023-01140-3 ↗
6. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
7. Fabrication of perovskite solar cells in ambient air by blocking perovskite hydration with guanabenz acetate salt10.1038/s41560-023-01358-w ↗
8. Controlled Nucleation and oriented crystallization of methylammonium-free perovskites via in situ generated 2D perovskite phases10.1002/adma.202405921 ↗
9. Highly efficient and stable perovskite solar cells via a multifunctional hole transporting material10.1016/j.joule.2024.02.019 ↗
10. Towards enabling stable lead halide perovskite solar cells; interplay between structural, environmental, and thermal stability10.1039/C7TA00434F ↗
11. Recent progress on the long-term stability of perovskite solar cells10.1002/advs.201700387 ↗
12. Progress toward stable lead halide perovskite solar cells10.1016/j.joule.2018.07.007 ↗
13. Recent progress and advances of perovskite crystallization in carbon-based printable mesoscopic solar cells10.1002/adma.202415405 ↗
14. Full printable processed mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells with carbon counter electrode10.1038/srep03132 ↗
15. Synergy of ammonium chloride and moisture on perovskite crystallization for efficient printable mesoscopic solar cells10.1038/ncomms14555 ↗
16. Enhancing the performance of FA-based printable mesoscopic perovskite solar cells via the polymer additive10.1002/aenm.202204335 ↗
17. Mesoporous TiO2 layer suppresses ion accumulation in perovskite solar cells10.1039/D2CP02037H ↗
18. Parameters affecting I-V hysteresis of CH3NH3PbI3 perovskite solar cells: effects of perovskite crystal size and mesoporous TiO2 layer10.1021/jz501392m ↗
19. Wettability sequence optimization and interface strain buffering in triple mesoporous layer-based printable perovskite solar cells for enhanced performance10.1002/adma.202413151 ↗
20. W-doped TiO2 photoanode for high performance perovskite solar cell10.1016/j.electacta.2016.02.147 ↗
21. Enhanced interfacial binding and electron extraction using Boron-doped TiO2 for highly efficient hysteresis-free perovskite solar cells10.1002/advs.201901213 ↗
22. W-doped TiO2 as electron transport layer for high performance solution-processed perovskite solar cells10.1016/j.apsusc.2021.150298 ↗
23. Efficient rare earth Co-doped TiO2 electron transport layer for high-performance perovskite solar cells10.1016/j.jcis.2019.06.003 ↗
24. Tailoring interface and morphology of TiO2 electron transport layer with potassium bitartrate for high-performance perovskite solar cells10.1016/j.apsusc.2024.160139 ↗
25. Enhancing efficiency of planar structure perovskite solar cells using Sn-doped TiO2 as electron transport layer at low temperature10.1016/j.electacta.2017.12.108 ↗
26. Efficient quasi-mesoscopic perovskite solar cells using Li-doped hierarchical TiO2 as scaffold of scattered distribution10.1016/j.cej.2017.08.045 ↗
27. Low-temperature processed rare-earth doped brookite TiO2 scaffold for UV stable, hysteresis-free and high-performance perovskite solar cells10.1016/j.nanoen.2020.105183 ↗
28. Mg-doped TiO2 boosts the efficiency of planar perovskite solar cells to exceed 19%10.1039/C6TA06879K ↗
29. Resolving hysteresis in perovskite solar cells with rapid flame-processed cobalt-doped TiO210.1002/aenm.201801717 ↗
30. Enhanced electrical properties of Li-salts doped mesoporous TiO2 in perovskite solar cells10.1016/j.joule.2021.02.007 ↗
31. Laser processing of Li-doped mesoporous TiO2 for ambient-processed mesoscopic perovskite solar cells10.1039/D3TC03151A ↗
32. Mesoporous TiO2 electron transport materials derived from 2D Ti-MOFs for enhanced power conversion efficiency in printed mesoscopic perovskite solar cells10.1021/acsanm.3c02474 ↗
33. Highly oriented MAPbI3 crystals for efficient hole-conductor-free printable mesoscopic perovskite solar cells10.1016/j.fmre.2021.09.008 ↗
34. Oxygen vacancy management for high-temperature mesoporous SnO2 electron transport layers in printable perovskite solar cells
35. Stratified oxygen vacancies enhance the performance of mesoporous TiO2 electron transport layer in printable perovskite solar cells
36. Enhanced electronic properties in mesoporous TiO2 via lithium doping for high-efficiency perovskite solar cells10.1038/ncomms10379 ↗
37. Molten salt-lithium process induced controllable surface defects in titanium oxide for efficient photocatalysis10.1016/j.apcatb.2023.122494 ↗
38. Efficient perovskite solar cells with low J-V hysteretic behavior based on mesoporous Sn-doped TiO2 electron extraction layer10.1016/j.cej.2022.136761 ↗
39. Supramolecular aza crown ether modulator for efficient and stable perovskite solar cells
40. Hierarchical Sn and AgCl co-doped TiO2 microspheres as electron transport layer for enhanced perovskite solar cell performance10.1016/j.cattod.2018.08.001 ↗
41. Bifunctional passivation by lewis-base molecules for efficient printable mesoscopic perovskite solar cells10.1016/j.jechem.2024.04.035 ↗
42. Octylammonium iodide induced in-situ healing behavior at perovskite / carbon interface: the “slow-release effect” caused by carbon black adsorption
43. Electron injection and defect passivation for high-efficiency mesoporous perovskite solar cells10.1126/science.adk9089 ↗
44. Efficient planar heterojunction perovskite solar cells with Li-doped compact TiO2 layer10.1016/j.nanoen.2016.11.028 ↗