Precise fabrication of surface-reconstructed LaMnO3 perovskite with enhanced catalytic performance in CH4 oxidation
Source abstract
Abstract
Abstract In this study, MnOx/LaMnO3 catalyst (LMO) was successfully synthesized through a selectively etched method, wherein MnOx was in-situ formed on the surface of LaMnO3. The modified LMO catalysts possessed the large specific surface area, high molar ratios of Mn4+/(Mn4++Mn3+), and outstanding low-temperature reducibility. Moreover, the more efficient electron transfer from Mn3+/Mn4+ redox cycles and O2 ⇔ OL due to the generation of oxygen defects contributed to the strong interaction between MnOx and LaMnO3. Among all LMO catalysts, the LMO-4 (etched 40 min) catalyst exhibited the excellent activity (T90 at 448 °C), stability and optimum endurability in methane catalytic combustion (5 vol% water) during the steady state of 100 h, which could be greatly assigned to its larger specific surface area, superior low temperature reducibility, the highest molar ratio Mn4+ and better oxygen mobility. The lowest apparent activation energy (Ea) of LMO-4 catalyst (61.8 kJ/mol) was in good accordance with its optimum catalytic activity for methane combustion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Catalytic Processes in Materials Science · Catalysis and Oxidation Reactions · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Surface tuning of noble metal doped perovskite oxide by synergistic effect of thermal treatment and acid etching: A new path to high-performance catalysts for methane combustion10.1016/j.apcatb.2018.08.038 ↗
2. Effect of Co/Ni ratios in cobalt nickel mixed oxide catalysts on methane combustion10.1016/j.apcata.2015.07.040 ↗
3. Enhanced methane combustion over Co3O4 catalysts prepared by a facile precipitation method: Effect of aging time10.1016/j.apsusc.2017.02.186 ↗
4. Low temperature complete combustion of methane over cobalt chromium oxides catalysts10.1016/j.cattod.2012.03.026 ↗
5. Kinetic and spectroscopic study of methane combustion over α-Mn2O3 nanocrystal catalysts10.1016/j.jcat.2007.11.010 ↗
6. Co3O4/HZSM-5 catalysts for methane combustion: The effect of preparation methodologies10.1016/j.cattod.2017.01.042 ↗
7. Synthesis, characterization, and catalytic evaluation of Co3O4/γ-Al2O3 as methane combustion catalysts: Significance of Co species and the redox cycle10.1016/j.apcatb.2014.12.016 ↗
8. Efficient removal of methane over cobalt-monoxide-doped AuPd nanocatalysts10.1021/acs.est.6b03983 ↗
9. Preparation, characterization, and catalytic performance of PdPt/3DOM LaMnAl11O19 for the combustion of methane10.1016/j.apcata.2018.05.022 ↗
10. Catalytic performance of MnOx–NiO composite oxide in lean methane combustion at low temperature10.1016/j.apcatb.2012.09.021 ↗
11. Effect of transition metal doping on the catalytic performance of Au–Pd/3DOM Mn2O3 for the oxidation of methane and o-xylene10.1016/j.apcatb.2017.01.030 ↗
12. Three-dimensionally ordered macroporous La0.6Sr0.4MnO3 supported Ag nanoparticles for the combustion of methane10.1021/jp502256t ↗
13. High specific surface area LaMO3 (M = Co, Mn) hollow spheres: synthesis, characterization and catalytic properties in methane combustion10.1039/C4RA10053K ↗
14. Chemical looping methane partial oxidation: The effect of the crystal size and O content of LaFeO310.1016/j.jcat.2012.06.022 ↗
15. Preparation and catalytic activities of the novel double perovskite-type oxide La2CuNiO6 for methane combustion10.1016/j.catcom.2012.01.008 ↗
16. Influence of lanthanum stoichiometry in La1−xFeO3−δ perovskites on their structure and catalytic performance in CH4 total oxidation10.1016/j.apcatb.2012.07.001 ↗
17. Enhanced low-temperature activity of LaMnO3 for toluene oxidation: The effect of treatment with an acidic KMnO410.1016/j.cej.2019.01.139 ↗
18. Catalytic oxidation of chlorinated organics over lanthanide perovskites: effects of phosphoric acid etching and water vapor on chlorine desorption behavior10.1021/acs.est.8b04582 ↗
19. Mechanistic origin of enhanced CO catalytic oxidation over Co3O4/LaCoO3 at lower temperature10.1002/cctc.201700937 ↗
20. Role of oxygen vacancies and Mn sites in hierarchical Mn2O3/LaMnO3-δ perovskite composites for aqueous organic pollutants decontamination10.1016/j.apcatb.2019.01.025 ↗
21. In situ poly(methyl methacrylate)-templating generation and excellent catalytic performance of MnOx/3DOM LaMnO3 for the combustion of toluene and methanol10.1016/j.apcatb.2013.04.051 ↗
22. Facile synthesis of highly active LaCoO3/MgO composite perovskite via simultaneous co-precipitation in supercritical water10.1016/j.apcatb.2012.07.020 ↗
23. Catalytic oxidation of vinyl chloride emission over LaMnO3 and LaB0.2Mn0.8O3 (B=Co, Ni, Fe) catalysts10.1016/j.apcatb.2012.09.056 ↗
24. LaMnO3 perovskite oxides prepared by different methods for catalytic oxidation of toluene10.1016/j.apcatb.2013.11.030 ↗
25. Catalytic oxidation of 1,2-dichloropropane over supported LaMnOx oxides catalysts10.1016/j.apcatb.2016.08.038 ↗
26. Direct molten polymerization synthesis of highly active samarium manganese perovskites with different morphologies for VOC removal
27. Catalytic combustion of vinyl chloride over Sr doped LaMnO310.1016/j.cattod.2018.05.005 ↗
28. High specific surface area LaFeCo perovskites—Synthesis by nanocasting and catalytic behavior in the reduction of NO with CO10.1016/j.apcatb.2009.04.004 ↗
29. Controlled preparation and high catalytic performance of three-dimensionally ordered macroporous LaMnO3 with nanovoid skeletons for the combustion of toluene10.1016/j.jcat.2011.12.015 ↗
30. Catalytic behavior of hydrothermally synthesized La0.5Sr0.5MnO3 single-crystal cubes in the oxidation of CO and CH410.1016/j.jcat.2007.05.007 ↗
31. In situ PMMA-templating preparation and excellent catalytic performance of Co3O4/3DOM La0.6Sr0.4CoO3 for toluene combustion10.1016/j.apcata.2013.03.022 ↗
32. Oxidation of residual methane from VNG vehicles over Co3O4 -based catalysts: Comparison among bulk, Al2O3 -supported and Ce-doped catalysts10.1016/j.apcatb.2018.06.050 ↗
33. Enhanced performance for plasma-catalytic oxidation of ethyl acetate over La1-xCexCoO3+δ catalysts10.1016/j.apcatb.2017.04.066 ↗
34. New route to CeO2/LaCoO3 with high oxygen mobility for total benzene oxidation10.1016/j.apsusc.2016.11.033 ↗
35. Catalytic performance of NO oxidation over LaMeO3 (Me=Mn, Fe, Co) perovskite prepared by the sol–gel method10.1016/j.catcom.2013.03.039 ↗
36. The influence of nonstoichiometry on LaMnO3 perovskite for catalytic NO oxidation10.1016/j.apcatb.2013.01.027 ↗
37. Effects of Ce substitution at the A-site of LaNi0.5Fe0.5O3 perovskite on the enhanced catalytic activity for dry reforming of methane10.1016/j.apcatb.2017.10.022 ↗
38. Effects of cerium incorporation on the catalytic oxidation of benzene over flame-made perovskite La1−xCexMnO3 catalysts10.1016/j.partic.2014.07.001 ↗
39. The effect of A-site substitution by Sr, Mg and Ce on the catalytic performance of LaMnO3 catalysts for the oxidation of vinyl chloride emission10.1016/j.apcatb.2013.01.031 ↗
40. Precisely fabricating Ce-O-Ti structure to enhance performance of Ce-Ti based catalysts for selective catalytic reduction of NO with NH310.1016/j.cej.2018.07.198 ↗
41. The improved reactivity of manganese catalysts by Ag in catalytic oxidation of toluene10.1016/j.apcatb.2012.12.008 ↗
42. Preparation, characterization, and catalytic properties of NdSrCu1−xCoxO4−δ and Sm1.8Ce0.2Cu1−xCoxO4+δ (x=0, 0.2 and 0.4) for methane combustion10.1016/j.apcatb.2008.11.015 ↗
43. La(1–x)SrxCo1−yFeyO3 perovskites prepared by sol–gel method: Characterization and relationships with catalytic properties for total oxidation of toluene10.1016/j.apcatb.2008.10.022 ↗