journal article·2017-01Open access

Comparison study of transparent RF-sputtered ITO/AZO and ITO/ZnO bilayers for near UV-OLED applications

Mahdiyar Nouri Rezaie, Negin Manavizadeh, Ehsan Mohammadi Nasr Abadi, Ebrahim Nadimi, Farhad Akbari Boroumand

Abstract

Abstract Hybrid inorganic/organic light-emitting diodes have attracted much attention in the field of luminescent electronics due to the desired incorporation of high optoelectronic features of inorganic materials with the processability and variety of organic polymers. To generate and emit a near ultraviolet (N-UV) ray, wide band gap semiconductors can be applied in the organic light-emitting diodes (OLEDs). In this paper, zinc oxide (ZnO) and aluminum-doped ZnO (AZO) thin films are deposited by radio frequency (RF) sputtering above the ITO electrode and poly [2-methoxy-5-(2-ethyl-hexyloxy)-1,4-phenylene-vinylene] (MEH-PPV) conjugated polymer is utilized as a complementary p -type semiconductor in OLED structure. The impact of ZnO and AZO thickness on the structural, electrical, optical and morphological properties of ITO/AZO and ITO/ZnO bilayers are scrutinized and compared. Results show that with the enlargement of both ZnO and AZO film thickness, the physical properties are gradually improved resulting in the better quality of transparent conducting thin film. The average electrical resistivity of 8.4 × 10 −4 and 1.1 × 10 −3 Ω-cm, average sheet resistance of 32.9 and 42.3 Ω/sq, average transmittance of 88.3 and 87.3% and average FOM of 1.0 × 10 4 and 7.4 × 10 3 (Ω-cm) −1 are obtained for ITO/AZO and ITO/ZnO bilayers, respectively. Moreover, comparing the results indicates that the strain and the stress within the ITO/AZO bilayer are decreased nearly 19% with respect to ITO/ZnO bilayer which yield higher quality of crystal. Consequently, the physical properties of ITO/AZO bilayer is found to be superior regarding ITO/ZnO bilayer. For fabricated UV-OLEDs, the turn-on voltages, the characteristic energy ( E t ) and the total concentration of traps ( N t ) for the devices with the structures of ITO/ZnO/MEH-PPV/Al and ITO/AZO/MEH-PPV/Al are obtained 12 and 14 V, 0.108 and 0.191 eV, 9.33 × 10 16 and 5.22 × 10 16 cm −3 , respectively. Furthermore, according to the electroluminescence (EL) spectra, the near band emission (NBE) peak for device with the structure of ITO/ZnO/MEH-PPV/Al is attained nearly in the wavelengths of 408 nm which is in N-UV region. For ITO/AZO/MEH-PPV/Al, a slightly blue shift in NBE peak is observed due to the Burstein–Moss (BM) effect. Ultimately, different charge carrier transport mechanisms of fabricated UV-OLEDs have been carefully investigated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Advanced Sensor and Energy Harvesting Materials · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Optoelectronic characteristics of MEH-PPV+ BT blend thin films in polymer light emitting diodes10.1088/0268-1242/30/6/065016 ↗
2. Organic light emitting diodes: energy saving lighting technology—a review10.1016/j.rser.2012.02.021 ↗
3. On the electrical characteristics of the Al/rhodamine-101/p-Si MS structure at low temperatures10.1016/j.mssp.2014.08.013 ↗
4. Low driving voltage in polymer light-emitting diodes with CdS nanoparticles as an electron transport layer10.1117/1.JNP.9.093081 ↗
5. Use of a new blue emitter in color-Stable, flexible polymeric white light-emitting diodes with a simple structure10.1007/s11664-015-3771-z ↗
6. Highly efficient UV organic light‐emitting devices based on Bi (9, 9‐diarylfluorene) s10.1002/adma.200401476 ↗
7. Spirobifluorene derivatives for ultraviolet organic light-emitting diodes10.1016/j.synthmet.2006.07.003 ↗
8. Ultraviolet electroluminescence from organic light-emitting diode with cerium (III)–crown ether complex10.1016/j.sse.2007.05.003 ↗
9. Zinc oxide nanorods/polymer hybrid heterojunctions for white light emitting diodes10.1088/0022-3727/44/22/224017 ↗
10. Hybrid organic-inorganic light emitting diode using ZnO nanorods as electron transport layer, in: micro and Nanoelectronics (RSM)
11. Effect of the polymer emission on the electroluminescence characteristics of n-ZnO nanorods/p-polymer hybrid light emitting diode10.1007/s00339-011-6411-3 ↗
12. Low-Voltage UV-Electroluminescence from ZnO‐Nanowire Array/p‐GaN Light‐Emitting diodes10.1002/adma.201000611 ↗
13. Pulsed laser deposition of ITO/AZO transparent contact layers for GaN LED applications10.1364/OE.19.016244 ↗
14. Structure and properties of transparent conductive doped ZnO films by pulsed laser deposition10.1016/j.apsusc.2006.02.046 ↗
15. Electroluminescence of ZnO nanorods embedded in a polymer film10.1016/j.ssc.2014.09.013 ↗
16. Electroluminescence of ZnO nanorods/MEH-PPV heterostructure devices10.1016/j.orgel.2010.01.020 ↗
17. The improvement of near-ultraviolet electroluminescence of ZnO nanorods/MEH-PPV heterostructure by using a ZnS buffer layer10.1016/j.orgel.2010.09.018 ↗
18. Formation of Al-doped ZnO thin films on glass by sol–gel process and characterization
19. Effects of aluminum doping and substrate temperature on zinc oxide thin films grown by pulsed laser deposition10.1007/s00339-010-5925-4 ↗
20. RF‐sputtered Al‐doped ZnO thin films: optoelectrical properties and application in photovoltaic devices10.1002/pssa.201431107 ↗
21. Thickness-Dependent structural, optical, and electrical characteristics of ZnO: Al thin films and application in OLEDs electron devices10.1109/TED.2014.2353300 ↗
22. Effects of ITO precursor thickness on transparent conductive Al doped ZnO film for solar cell applications10.1016/j.solmat.2010.04.068 ↗
23. Fabrication of surface-textured ZnO: Al/ITO bilayers with enhanced electrical and light-scattering properties10.1016/j.solidstatesciences.2014.03.003 ↗
24. Magnetron sputtered AZO thin films on commercial ITO glass for application of a very low resistance transparent electrode10.1088/0022-3727/35/23/310 ↗
25. Semiconductor to metal transition in degenerate ZnO: Al films and the impact on its carrier scattering mechanisms and bandgap for OLED applications
26. Influence of thickness and annealing temperature on the electrical, optical and structural properties of AZO thin films10.1016/j.vacuum.2012.02.040 ↗
27. Properties of conductive zinc oxide films for transparent electrode applications prepared by rf magnetron sputtering10.1063/1.344341 ↗
28. Thickness study of AZO films by RF sputtering in Ar+ H2 atmosphere at room temperature10.1002/pssa.201228014 ↗
29. The properties of aluminum-doped zinc oxide thin films prepared by rf-magnetron sputtering from nanopowder targets10.1016/j.msec.2007.10.006 ↗
30. Properties of ITO–AZO bilayer thin films prepared by magnetron sputtering for applications in thin-film silicon solar cells10.1007/s00339-012-7431-3 ↗
31. Effect of substrate-induced strain on the structural, electrical, and optical properties of polycrystalline ZnO thin films10.1063/1.1769598 ↗
32. Influence of substrates on the structural and morphological properties of RF sputtered ITO thin films for photovoltaic application10.1016/j.tsf.2008.11.027 ↗
33. Effect of thickness on structural, electrical, and optical properties of ZnO: Al films deposited by pulsed laser deposition10.1063/1.2437572 ↗
34. Effects of Al concentration on structural and optical properties of Al-doped ZnO thin films10.5012/bkcs.2012.33.4.1235 ↗
35. Comprehensive study of ZnO films prepared by filtered cathodic vacuum arc at room temperature10.1063/1.1592007 ↗
36. Zaini · Chin. Phys. Lett. · 2016 · 33 · 01810110.1088/0256-307X/33/1/018101 ↗
37. Bipolar resistive switching characteristics of poly (3, 4-ethylene-dioxythiophene): Poly (styrenesulfonate) thin film10.1016/j.cap.2009.12.011 ↗
38. Charge transport and microstructure in PFO: MEH-PPV polymer blend thin films10.1016/j.synthmet.2010.06.010 ↗
39. Charge injection and trapping in silicon nanocrystals10.1063/1.2119431 ↗
40. Trap filled limit of conducting organic materials10.1063/1.1503863 ↗
41. Modelling temperature-dependent current–voltage characteristics of an MEH-PPV organic light emitting device
42. Nanoscale charge transport in an electroluminescent polymer investigated by conducting atomic force microscopy10.1063/1.1509464 ↗
43. White light electroluminescence from poly (9-vinylcarbazole)(PVK)/ZnO NRs/poly (2-methoxy-5-(2-ethylhexyloxy)-1, 4-phenylenevinylene)(MEH-PPV) dual heterojunctions10.1007/s00339-014-8354-y ↗
44. Negative differential resistance effect in organic devices based on an anthracene derivative10.1063/1.2338513 ↗
45. Trap filled limit voltage (VTFL) and V2 law in space charge limited currents10.1063/1.2802553 ↗
46. Trap free space charge limited conduction and high mobility in cobalt phthalocyanine-iron phthalocyanine composite thin films, in: solid State Phenomena
47. Interchain and intrachain emission branching in polymer light-emitting diode doped by organic molecules10.1063/1.3276271 ↗
48. M. Ghosh, A. Raychaudhuri, Field induced reversible control of visible luminescence in ZnO nanostructures, arXiv preprint arXiv:0903.3735, (2009).
49. Borisenko · 2011
50. Inherent photoluminescence stokes shift in GaAs10.1364/OL.40.002580 ↗
51. Hybrid LEDs based on ZnO‐nanowire arrays10.1002/pssb.200983183 ↗
52. A novel fabrication of MEH-PPV/Al: znO nanorod arrays based ordered bulk heterojunction hybrid solar cells10.1016/j.apsusc.2013.01.119 ↗
53. Influence of various sol concentrations on stress/strain and properties of ZnO thin films synthesised by sol–gel technique10.1016/j.tsf.2012.11.095 ↗