Optimizing the manufacturing process to increase fill factor and elevate efficiency of n-type crystalline silicon TOPCon solar cells
Source abstract
Abstract
The growth of the photovoltaics industry is driven by advancements in solar cell conversion efficiency and manufacturing processes. While passivated emitter and rear cell solar cells achieve around 23% efficiency, tunnel oxide passivated contact (TOPCon) technology offers a 1.5%–2% efficiency gain. However, this still falls short of the theoretical limit for TOPCon solar cells. This study investigates methods to enhance fill factor and overall efficiency by optimizing key manufacturing processes. By reducing series resistance and improving shunt resistance, the optimized TOPCon solar cells demonstrated efficiency improvements of 0.24% and 0.11%, respectively. Combining these optimizations, a potential efficiency gain of 0.35% could be achievable compared with current TOPCon solar cells. These findings highlight the potential for further efficiency improvements through continued process optimization and contribute to the advancement of the photovoltaic industry.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · solar cell performance optimization · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Advanced Engineering, University of Science and Technology Beijing 1 , Beijing 100083,
THALES Energy (SuZhou) Co., Ltd. 2 , Suzhou 215332,
Chuzhou Jietai New Energy Technology Co., Ltd. 3 , Chuzhou 239236,
References (32)
Show source-provided references
1. Bright future: Solar power as a major contributor to the U.S. grid10.1109/mpe.2012.2234404 ↗
2. A passivated rear contact for high-efficiency n-type Si solar cells enabling high Voc’s and FF > 82%10.4229/28THEUPVSEC2013-2CO.4.4 ↗
3. Electrical performance, loss analysis, and efficiency potential of industrial-type PERC, TOPCon, and SHJ solar cells: A comparative study10.1002/pip.3839 ↗
4. High-efficiency n-TOPCon bifacial solar cells with selective poly-Si based passivating contacts10.1016/j.solmat.2023.112458 ↗
5. Fundamentals, present status and future perspective of TOPCon solar cells: A comprehensive review10.1016/j.surfin.2022.101917 ↗
6. A fill factor loss analysis method for silicon wafer solar cells10.1109/jphotov.2013.2270348 ↗
7. Review and test of methods for determination of the solar cell series resistance10.1016/0960-1481(94)e0021-v ↗
8. Preparation of TOPCon solar cells by LPCVD method
9. Influence of shunt resistance on the performance of solar photovoltaic cell
10. Series resistance effects on solar cell measurements10.1016/0365-1789(63)90063-8 ↗
11. Statistics of the recombinations of holes and electrons10.1103/physrev.87.835 ↗
12. Electron-hole recombination in germanium10.1103/physrev.87.387 ↗
13. A new silicon p-n junction photocell for converting solar radiation into electrical power10.1063/1.1721711 ↗
14. Optimized grid design for a sun-concentrator solar cell
15. 1982 · 81
16. Influence of series resistance on guidelines for manufacture of concentrator p-on-n GaAs solar cells10.1002/(sici)1099-159x(200003/04)8:2<211::aid-pip291>3.3.co;2-4 ↗
17. A genuine circular contact grid pattern for solar cells10.1002/pip.1076 ↗
18. Theoretical review of series resistance determination methods for solar cells10.1016/j.solmat.2014.08.003 ↗
19. Transfer-length method measurements under variable illumination to investigate hole- selective passivating contacts on c-Si(p) and c-Si(n) wafers10.1109/jphotov.2023.3242131 ↗
20. Bulk resistivity optimization for low-bulk-lifetime silicon solar cells10.1002/pip.380.abs ↗
21. Ultra fine line frontside metallisation on crystalline silicon solar cells by screen and stencil printing
22. Development of passivating edge shingle modules with right cut, new loss evaluation and liquid-based edge passivation strategy10.1016/j.solmat.2023.112513 ↗
23. Postmetallization ‘passivated edge technology’ for separated silicon solar cells10.1109/jphotov.2019.2959946 ↗
24. Post-separation processing for silicon heterojunction half solar cells with passivated edges10.1109/jphotov.2021.3099732 ↗
25. Edge passivation: Considerable improvement in photovoltaic performance of perovskite/silicon tandem solar cells10.1063/5.0204758 ↗
26. Recent progress in inkjet-printed solar cells10.1039/c9ta03155c ↗
27. Aerosol jet printed grid for ITO-free inverted organic solar cells10.1016/j.solmat.2012.06.042 ↗
28. Evolution of metal plating for silicon solar cell metallisation10.1002/pip.2221 ↗
29. Ni/Cu electroplating, a worthwhile alternative to use instead of Ag screen-printed front side metallization of conventional solar cells10.1016/j.mssp.2014.05.012 ↗
30. The next Frontier: Electrodeposition for solar cell fabrication10.1149/2.f06112if ↗
31. Plating for passivated-contact solar cells
32. Electroplating