Synthesis and characterization of copper, polyimide and TIPS-pentacene layers for the development of a solution processed fibrous transistor
Source abstract
Abstract
A study was performed for the development of a flexible organic field effect transistor starting from a polyester fibre as substrate material. Focus of subsequent layer deposition was on low temperature soluble processes to allow upscaling. Gate layer consists out of a pyrrole polymerization and copper coating step. Polyimide dielectric layer was deposited using dipcoating. Gold electrodes were vacuum evaporated and patterned via mask fibre shadowing. The active layer consisted of a soluble p-type TIPS-pentacene organic semiconductor. Different deposition techniques have been examined. Considerable progress in development of a transistor has been made.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Nanomaterials and Printing Technologies · Nanofabrication and Lithography Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Ghent University 1 , Department of Textiles, Technologiepark 907, 9052 Zwijnaarde, Belgium
Ghent University 2 , Department of inorganic and physical chemistry, Ghent University, Krijgslaan 281, 9000 Ghent, Belgium
References (21)
Show source-provided references
1. Weave patterned organic transistors on fiber for e-textiles10.1109/TED.2004.841331 ↗
2. Flexible organic field effect transistors for biomedical microimplants using polyimide and parylene C as substrate and insulator layers10.1088/0960-1317/16/8/016 ↗
3. Steps towards a textile-based transistor – Development of the gate and insulating layer10.1177/0040517510365948 ↗
4. Enhancement of the thermal stability of chemically synthesized polypyrrole10.1016/S0379-6779(97)80684-4 ↗
5. 2006 · 28310.1533/9781845691622.3.283 ↗
6. Electroconductive textile structures through electroless deposition of polypyrrole and copper at polyaramide surfaces10.1016/j.surfcoat.2006.08.128 ↗
7. Electroless plating of palladium and copper on polypyrrole films10.1016/S0379-6779(00)00592-0 ↗
8. Organic thin film transistors10.1016/S1369-7021(04)00398-0 ↗
9. Highly soluble acenes as semiconductors for thin film transistors10.1039/b607172d ↗
10. Control of the Morphology and Structural Development of Solution-Processed Functionalized Acenes for High-Performance Organic Transistors10.1002/adfm.200801135 ↗
11. High-performance, solution-processed organic thin film transistors from a novel pentacene precursor10.1021/ja0266621 ↗
12. Thermal annealing effect on the crack development and the stability of 6,13-bis(triisopropylsilylethynyl)-pentacene field-effect transistors with a solution-processed polymer insulator
13. Silylethyne-substituted pentacenes
14. Photochemical stability of pentacene and a substituted pentacene in solution and in thin films10.1021/cm049060k ↗
15. High mobility solution processed 6,13-bis(triisopropyl-silylethynyl) pentacene organic thin film transistors
16. Organic field-effect transistors from solution-deposited functionalized acenes with mobilities as high as 1 cm(2)/V-s10.1021/ja042353u ↗
17. High-performance thin-film transistor with 6,13-bis(triisopropylsilylethynyl) pentacene by inkjet printing10.1016/j.orgel.2008.05.002 ↗
18. Influence of Solvent on the Film Morphology, Crystallinity and Electrical Characteriztics of Triisopropylsilyl Pentacene OTFTs10.1149/1.2783765 ↗
19. All-solution-processed bottom-gate organic thin-film transistor with improved subthreshold behaviour using functionalized pentacene active layer
20. Morphological properties of membranes fabricated by VIPS process using PEI/NMP/water system: SEM analyzis and mass transfer modelling10.1016/j.memsci.2009.11.036 ↗
21. Phase behavior and mechanism of membrane formation for polyimide/DMSO/water system10.1016/S0376-7388(00)00648-7 ↗