journal article·2024-05-01Open access

Green synthesis and characterization of gold nanoparticles from discarded computer PCBs on reduction of environmental pollution

Pronoy Mondal, Mohammad Salman Haque, Biswajit Ghose, Ahsan Ahammed Afridi

AIP Advances· Volume 14· Issue 5

Abstract

The economic value of gold content in electronic waste, particularly waste printed circuit boards (PCBs), has generated interest in recovering gold from this material. Unfortunately, due to the severe environmental hazards associated with such waste, there is a pressing need for efficient and selective methods of gold nanoparticle recovery. A novel technique has been developed to synthesize gold nanoparticles that employ chlorate leaching and Punica granatum extract to minimize the environmental impact of electronic waste. Multiple analytical methods, including UV-Vis, XRD, EDS, SEM, and TEM analysis, were utilized to identify and characterize the extracted gold nanoparticles. The UV-Vis spectrum showed GNP-absorption peaks at a narrow range of wavelengths, primarily at 520 nm, confirming the formation of gold nanoparticles from the e-waste. The XRD analysis identified the material as metallic gold with characteristic peaks of gold crystals (111), (200), (220), and (311), corresponding to the FCC crystal structure. The SEM and TEM analysis revealed that most of the Au nanoparticles were less than 40 nm in size, with some larger particles resulting from the agglomeration of smaller ones. The EDS spectrum analysis indicated that the gold atoms emitted strong signals. At the same time, other elements such as carbon, oxygen, and metals such as Sn, Zn, Pd, Cu, and Cd showed weaker signals. The recovered gold nanoparticles were found to have a bandgap of 2.2 eV, indicating that they are a direct bandgap semiconductor suitable for use in optoelectronic applications. The environmental impact of the PCBs and the chemicals used in the process were also analyzed to address the necessity of using discarded electronic waste to reduce environmental pollution. The proposed method showed high efficiency for extracting gold nanoparticles from e-waste, with simple process steps, low chemical usage, and low cost, as demonstrated by the results.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Recycling and Waste Management Techniques · Extraction and Separation Processes · Nanoparticles: synthesis and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials and Metallurgical Engineering, Bangladesh University of Engineering and Technology 1 , Dhaka, Bangladesh

Department of Materials Science and Engineering, Khulna University of Engineering and Technology 2 , Khulna 9203, Bangladesh

Department of Electrical and Electronic Engineering, Daffodil International University 3 , Dhaka, Bangladesh

References (53)

Show source-provided references
1. Hydrometallurgical recovery of metals from waste printed circuit boards (WPCBs): Current status and perspectives—A review10.1016/j.resconrec.2018.08.007 ↗
2. Heavy metal extraction from PCB wastewater treatment sludge by sulfuric acid10.1016/j.jhazmat.2009.12.115 ↗
3. On the mechanical behaviour of thermally affected non-heat-treatable aluminium alloys10.59957/jctm.v58i6.156 ↗
4. 2021
5. Chemical and biological processes for multi-metal extraction from waste printed circuit boards of computers and mobile phones10.1177/0734242x14550021 ↗
6. E-Waste and the consumer: Improving options to reduce, reuse and recycle
7. Metal extraction and recovery from mobile phone PCBs by a combination of bioleaching and precipitation processes10.3390/min11091004 ↗
8. Effect of Sc and Zr on precipitation behaviour of wrought Al-bronze10.1088/1757-899x/1248/1/012037 ↗
9. Strengthening and softening behavior of non-heat-treatable aluminum alloys subject to deformation and annealing treatment10.1016/j.matpr.2022.12.113 ↗
10. Treatment of manufacturing scrap TV boards by nitric acid leaching10.1016/j.seppur.2014.04.008 ↗
11. The effects of solution heat treatment on the microstructure and hardness of an aluminum-4% copper alloy with added nickel and tin10.1016/j.jalmes.2023.100042 ↗
12. Extraction of metals from waste printed circuit boards (WPCBs) in H2SO4–CuSO4–NaCl solutions10.1016/j.hydromet.2013.06.018 ↗
13. Alternatives to cyanide in the gold mining industry: What prospects for the future?10.1016/j.jclepro.2004.09.005 ↗
14. Greener approach for the extraction of copper metal from electronic waste10.1016/j.wasman.2015.11.023 ↗
15. Clean process for recovery of metals and recycling of acid from the leach liquor of PCBs10.1016/j.jclepro.2015.08.018 ↗
16. Printed circuit board recycling: Physical processing and copper extraction by selective leaching10.1016/j.wasman.2015.08.030 ↗
17. Synthesis of gold nanotriangles and silver nanoparticles using aloe vera plant extract10.1021/bp0501423 ↗
18. Recycling copper and gold from e-waste by a two-stage leaching and solvent extraction process10.1016/j.seppur.2021.118400 ↗
19. Investigation of electrical conductivity of gold nanoparticles scattered in polyvinylidene fluoride/polyvinyl chloride via laser ablation for electrical applications10.1007/s11664-020-08459-2 ↗
20. Copper dissoliution in concentrated sulfuric acid10.12691/wjce-7-3-2 ↗
21. Facile recovery of gold from e-waste by integrating chlorate leaching and selective adsorption using chitosan-based bioadsorbent10.1016/j.jece.2020.104661 ↗
22. Solvent extraction of gold using ionic liquid based process10.1063/1.4974419 ↗
23. Green synthesis of gold nanoparticles using plant extracts as reducing agents10.2147/ijn.s57343 ↗
24. In situ determination of colloidal gold concentrations with UV-vis spectroscopy: Limitations and perspectives10.1021/ac502053s ↗
25. Determination of size and concentration of gold nanoparticles from UV-vis spectra10.1021/ac0702084 ↗
26. Analytical characterization of gold nanoparticle primary particles, aggregates, agglomerates, and agglomerated aggregates10.1007/s11051-011-0268-4 ↗
27. Synergistic effect of Mg addition on the enhancement of the mechanical properties and evaluation of corrosion behaviors in 3.5 wt% NaCl of aluminum alloys10.1016/j.heliyon.2024.e25437 ↗
28. Biological synthesis of gold nanoparticles using Magnolia kobus and Diopyros kaki leaf extracts10.1016/j.procbio.2009.06.005 ↗
29. Green synthesis and electrochemical characterizations of gold nanoparticles using leaf extract of Magnolia kobus10.1016/s1452-3981(23)16581-3 ↗
30. Bioleaching of gold and copper from waste mobile phone PCBs by using a cyanogenic bacterium10.1016/j.mineng.2011.05.009 ↗
31. Thiourea bioleaching for gold recycling from e-waste10.1016/j.wasman.2018.11.021 ↗
32. Modeling microstructural and mechanical properties of solidified Al–Sn–Cu system10.37934/mjcsm.12.1.84101 ↗
33. Green synthesis of size controllable gold nanoparticles10.1016/j.saa.2013.07.077 ↗
34. Biosynthesis of silver and gold nanoparticles by novel sundried Cinnamomum camphora leaf10.1088/0957-4484/18/10/105104 ↗
35. Direct optical band gap measurement in polycrystalline semiconductors: A critical look at the Tauc method10.1016/j.jssc.2016.05.010 ↗
36. Green synthesis of gold nanoparticles and evaluation of its cytotoxic property against colon cancer cell line10.26479/2018.0406.01 ↗
37. Earth-abundant nontoxic direct band gap semiconductors for photovoltaic applications by ab initio simulations10.1016/j.solener.2019.08.011 ↗
38. Group IV direct band gap photonics: Methods, challenges, and opportunities10.3389/fmats.2015.00052 ↗
39. Environmental impact and human exposure to PCBs in Guiyu, an electronic waste recycling site in China10.1016/j.envint.2008.07.025 ↗
40. Punica granatum peel extract toxicity in mice10.17795/jjnpp-23770 ↗
41. Response surface methodology based optimization of in situ transesterification of dry algae with methanol, H2SO4 and NaOH10.1016/j.fuel.2018.11.038 ↗
42. Reagent approaches for improved detection of chlorate and perchlorate salts via thermal desorption and ionization10.1002/rcm.7427 ↗
43. Green synthesis of nitrogen, sulfur-co-doped worm-like hierarchical porous carbon derived from ginger for outstanding supercapacitor performance10.1016/j.carbon.2020.07.017 ↗
44. Practical preparation of methyl isobutyl ketone by stepwise isopropylation reaction of acetone10.1016/j.mcat.2017.02.010 ↗
45. Impact of nutrition on PCB toxicity10.1016/j.etap.2007.10.015 ↗
46. A comparative study on characterization of textile wastewaters (untreated and treated) toxicity by chemical and biological tests10.1016/j.chemosphere.2007.04.086 ↗
47. Overview of ecological toxicity of potassium chlorate pollution10.22004/ag.econ.245264 ↗
48. Acute oral toxicity assessment of ethanolic extracts of Antidesma bunius (L.) Spreng fruits in mice10.1016/j.toxrep.2021.06.010 ↗
49. A toxicological and dermatological assessment of alkyl cyclic ketones when used as fragrance ingredients10.1016/j.fct.2013.09.033 ↗
50. Simultaneous multicriteria-based optimization trends in industrial cases
51. Effects of temperature and potassium chlorate on leaf gas exchange and flowering in longan10.17660/actahortic.2010.863.42 ↗
52. Detection of banned and restricted ozone-depleting chemicals in printed circuit boards10.1080/15275920802502083 ↗
53. Evaluation of non-toxic corrosion inhibitors for copper in sulphuric acid10.1016/S0013-4686(02)00436-X ↗