Organic Solar Cell With Efficiency Over 20% and V_OC Exceeding 2.1 V Enabled by Tandem With All‐Inorganic Perovskite and Thermal Annealing‐Free Process

Abstract Organic solar cells (OSCs) based on polymer donor and non‐fullerene acceptor achieve power conversion efficiency (PCE) more than 19% but their poor absorption below 550 nm restricts the harvesting of high‐energy photons. In contrast, wide bandgap all‐inorganic perovskites limit the absorption of low‐energy photons and cause serious below bandgap loss. Therefore, a 2‐terminal (2T) monolithic perovskite/organic tandem solar cell (TSC) incorporating wide bandgap CsPbI₂Br is demonstrated as front cell absorber and organic PM6:Y6 blend as rear cell absorber, to extend the absorption of OSCs into high‐energy photon region. The perovskite sub‐cell, featuring a sol–gel prepared ZnO/SnO₂ bilayer electron transporting layer, renders a high open‐circuit voltage (V_OC). The V_OC is further enhanced by employing thermal annealing (TA)‐free process in the fabrication of rear sub‐cell, demonstrating a record high V_OC of 2.116 V. The TA‐free Ag/PFN‐Br interface in organic sub‐cell facilitates charge transport and restrains nonradiative recombination. Consequently, a remarkable PCE of 20.6% is achieved in monolithic 2T‐TSCs configuration, which is higher than that of both reported single junction and tandem OSCs, demonstrating that tandem with wide bandgap all‐inorganic perovskite is a promising strategy to improve the efficiency of OSCs.