journal article·2026-06-03

Enhancing Cycling Stability and Power Density of Ni-Rich NMC811 through CaTiO 3 Surface Coating: A Combined Experimental and Atomistic-Scale Study

Khadija Kouchi, Majid EL Kassaoui, Elhoucine Elmaataouy, Ayoub El Bendali, Gayea Hyun, Hind El Ouazzani, Oumaima Moustakim, Toru Tabuchi, Khadija El Kamouny, Mohamed Aqil, Ping Liu, Jones Alami, Omar Mounkachi, Abdelwahed Chari, Mouad Dahbi

ACS Applied Materials & Interfaces· Volume 18· Issue 21
Publisher page

Abstract

Ni-rich NMC811 layered oxide cathodes are promising candidates for high-energy lithium-ion batteries; however, their practical application under fast-charging conditions is limited by interfacial instability, oxygen release, and slow Li + diffusion. In this work, calcium titanate CaTiO 3 (CTO) was introduced as a perovskite-based surface coating to enhance the structural and electrochemical stability of Ni-rich NMC811 cathodes. Structural and interfacial analyses reveal the formation of a crystalline CTO coating that preserved the layered R 3̅ m structure and induced slight Ti doping during the thermal treatment. The synergistic effect of the CTO coating and interfacial Ti incorporation reduces Li + /Ni 2+ cation mixing, strengthens transition metal–oxygen bonding, and stabilizes lattice oxygen, thereby mitigating oxygen release and suppressing the detrimental H2 → H3 phase transition at high states of charge. As a result, the CTO coating demonstrates a notable performance enhancement, enabling the NMC811@CTO cathode to deliver a higher initial discharge capacity (200.2 mAh g –1 ), improved first-cycle Coulombic efficiency (92.0%), and markedly superior rate capability, retaining 158.3 mAh g –1 at 4C, while during asymmetric fast-charging up to 6C, it maintains 166.2 mAh g –1 compared to 130.8 mAh g –1 for pristine NMC811 and recovered 99.8% of its capacity when returned to C/10. These results highlight the enhanced fast-charging capability enabled by improved interfacial kinetics and structural stability. Long-term cycling at 1C further confirms improved stability, with NMC811@CTO retaining 83.1% of its capacity after 200 cycles compared to 64.1% for pristine NMC811. Electrochemical impedance spectroscopy and differential scanning calorimetry analyses reveal reduced charge-transfer resistance, improved thermal stability, and lower heat release. Density functional theory (DFT) and ab initio molecular dynamics (AIMD) calculations further show increased oxygen vacancy formation energy and reduced Li + migration barriers, providing atomic-scale insight into the enhanced oxygen stability and Li + transport. Overall, the CTO layer acts as both a protective interface and an ion-transport facilitator, offering an effective strategy for stabilizing Ni-rich cathodes under fast-charging conditions.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Chemical Sciences and Engineering (CCSE), Department of Materials Science, Energy and Nanoengineering (MSN)

Mohammed VI Polytechnic University (UM6P)

College of Computing, Mohammed VI Polytechnic University (UM6P), Lot 660, Hay Moulay Rachid, 43150 Ben Guerir, Morocco

Aiiso Yufeng Li Family Department of Chemical and Nano Engineering, University of California San Diego, 9500 Gilman Drive, La Jolla, California 92093, United States

Green Tech Institute GTI

Program of Materials Science and Engineering, University of California San Diego, 9500 Gilman Drive, La Jolla, California 92093, United States

Sustainable Power and Energy Center

University of California, San Diego

Laboratory of Condensed Matter and Interdisciplinary Sciences (LaMCScI), Department of Physics, Faculty of Sciences

Mohammed V University in Rabat

Funding

Office Ch?rifien des Phosphates · Universit? Mohammed VI Polytechnique

References (64)

Show source-provided references
1. 10.1155/2024/232926110.1155/2024/2329261 ↗
2. 10.1039/D4CP00182F10.1039/D4CP00182F ↗
3. 10.1016/j.nanoen.2024.10990810.1016/j.nanoen.2024.109908 ↗
4. 10.3390/ma1501039610.3390/ma15010396 ↗
5. 10.1016/j.jcis.2022.08.06110.1016/j.jcis.2022.08.061 ↗
6. 10.1016/j.jpowsour.2024.23413210.1016/j.jpowsour.2024.234132 ↗
7. 10.1007/s10008-024-06031-010.1007/s10008-024-06031-0 ↗
8. 10.1007/s10008-024-06031-010.1007/s10008-024-06031-0 ↗
9. 10.1016/j.nanoen.2018.09.05110.1016/j.nanoen.2018.09.051 ↗
10. 10.1002/cphc.20230096610.1002/cphc.202300966 ↗
11. 10.1039/c0jm00154f10.1039/c0jm00154f ↗
12. 10.1016/j.jallcom.2015.02.03210.1016/j.jallcom.2015.02.032 ↗
13. 10.1002/smll.20210704810.1002/smll.202107048 ↗
14. 10.1016/j.ensm.2024.10389310.1016/j.ensm.2024.103893 ↗
15. 10.1002/adfm.20242280610.1002/adfm.202422806 ↗
16. 10.1002/ejic.20200040810.1002/ejic.202000408 ↗
17. 10.1016/j.surfcoat.2021.12700910.1016/j.surfcoat.2021.127009 ↗
18. 10.1021/acsaem.1c0093910.1021/acsaem.1c00939 ↗
19. 10.1016/j.jpowsour.2022.23163310.1016/j.jpowsour.2022.231633 ↗
20. 10.1016/j.colsurfa.2023.13174810.1016/j.colsurfa.2023.131748 ↗
21. 10.1016/j.jallcom.2025.17873910.1016/j.jallcom.2025.178739 ↗
22. 10.1021/acsomega.1c0691810.1021/acsomega.1c06918 ↗
23. 10.1016/j.jechem.2024.08.04410.1016/j.jechem.2024.08.044 ↗
24. 10.1016/j.ceramint.2024.12.30910.1016/j.ceramint.2024.12.309 ↗
25. 10.1016/j.jcis.2023.08.10110.1016/j.jcis.2023.08.101 ↗
26. 10.1002/smll.20251460510.1002/smll.202514605 ↗
27. 10.1016/j.rechem.2023.10091510.1016/j.rechem.2023.100915 ↗
28. 10.1016/j.jpowsour.2022.23193810.1016/j.jpowsour.2022.231938 ↗
29. 10.1002/cssc.20250030010.1002/cssc.202500300 ↗
30. 10.1088/0953-8984/21/39/39550210.1088/0953-8984/21/39/395502 ↗
31. Blöchl P. E. · 2005 · 9310.1007/978-1-4020-3286-8_7 ↗
32. 10.1103/PhysRevLett.77.386510.1103/PhysRevLett.77.3865 ↗
33. 10.1007/s11664-022-09653-010.1007/s11664-022-09653-0 ↗
34. 10.1021/acsami.2c0756010.1021/acsami.2c07560 ↗
35. 10.1103/PhysRevB.13.518810.1103/PhysRevB.13.5188 ↗
36. 10.1063/1.132967210.1063/1.1329672 ↗
37. 10.1039/C6TA10357J10.1039/C6TA10357J ↗
38. Laidler K. J. · J. Chem. Educ. · 1984 · 61 · 49410.1021/ed061p494 ↗
39. 10.1016/S0008-8846(96)00200-110.1016/S0008-8846(96)00200-1 ↗
40. 10.2109/jcersj2.123.64310.2109/jcersj2.123.643 ↗
41. 10.1016/j.electacta.2018.01.11910.1016/j.electacta.2018.01.119 ↗
42. 10.1016/j.jcis.2024.08.06410.1016/j.jcis.2024.08.064 ↗
43. 10.61343/jcm.v1i02.4610.61343/jcm.v1i02.46 ↗
44. 10.1021/acs.jpcc.0c0072010.1021/acs.jpcc.0c00720 ↗
45. 10.1016/j.jpowsour.2025.23768210.1016/j.jpowsour.2025.237682 ↗
46. 10.1016/j.jpcs.2024.11229610.1016/j.jpcs.2024.112296 ↗
47. 10.1039/C9TA13014D10.1039/C9TA13014D ↗
48. 10.1088/0022-3727/48/41/41530410.1088/0022-3727/48/41/415304 ↗
49. 10.1016/j.mtsust.2023.10032610.1016/j.mtsust.2023.100326 ↗
50. 10.1016/j.jechem.2019.08.02210.1016/j.jechem.2019.08.022 ↗
51. 10.1002/smll.20230635110.1002/smll.202306351 ↗
52. 10.1021/acsaem.4c0084710.1021/acsaem.4c00847 ↗
53. 10.1021/acsami.4c0960910.1021/acsami.4c09609 ↗
54. 10.1021/acsami.0c1909110.1021/acsami.0c19091 ↗
55. 10.1021/cm300929r10.1021/cm300929r ↗
56. 10.1103/PhysRevB.81.02410910.1103/PhysRevB.81.024109 ↗
57. 10.1016/j.apsusc.2024.16061910.1016/j.apsusc.2024.160619 ↗
58. 10.1016/j.apmt.2024.10255910.1016/j.apmt.2024.102559 ↗
59. 10.1007/s12274-021-4035-210.1007/s12274-021-4035-2 ↗
60. 10.1016/j.cej.2024.15120810.1016/j.cej.2024.151208 ↗
61. 10.1007/s11581-021-04036-710.1007/s11581-021-04036-7 ↗
62. 10.1038/s41560-020-00697-210.1038/s41560-020-00697-2 ↗
63. 10.1002/adma.20251510610.1002/adma.202515106 ↗
64. 10.1002/aenm.20220056910.1002/aenm.202200569 ↗