Electrically Controlled Wavelength-Tunable Photoluminescence from van der Waals Heterostructures

Achieving facile control of the wavelength of light emitters is of great significance for many key applications in optoelectronics and photonics, including on-chip interconnection, super-resolution imaging, and optical communication. The Joule heating effect caused by electric current is widely applied in modulating the refractive index of silicon-based waveguides for reconfigurable nanophotonic circuits. Here, by utilizing localized Joule heating in the biased graphene device, we demonstrate electrically controlled wavelength-tunable photoluminescence (PL) from vertical van der Waals heterostructures combined by graphene and two-dimensional transition metal dichalcogenides (2D-TMDCs). By applying a moderate electric field of 6.5 kV·cm–1 to the graphene substrate, the PL wavelength of 2D-TMDCs exhibits a continuous tuning from 662 to 690 nm, corresponding to a bandgap reduction of 76 meV. The electric control is highly reversible during sweeping the bias back and forth. The temperature dependence of Raman and PL spectroscopy reveals that the current-induced local Joule heating effect plays a leading role in reducing the optical direct bandgap of TMDCs. The bias-dependent optical reflectivity and time-resolved photoluminescence measurements show a consistent reduction of the optical band gap of 2D-TMDCs and increased PL lifetimes with the electric field over the heterostructures. Moreover, we demonstrate the consistent device operation from 2D materials grown by chemical vapor deposition, showing great advantages for the scalability.