Sublimation and Recrystallization of CsPbBr₃ Constructing a Perovskite–Carbon Interface to Facilitate Hole Transfer in Printable All-Inorganic Perovskite Solar Cells

All-inorganic perovskite solar cells (APSCs) are a promising photovoltaic technology due to their unique physical and optical properties. For printable all-inorganic perovskite solar cells, the key factors limiting their photoelectric conversion performance are the crystallization of perovskite and the hole collection capability at the perovskite-carbon interface. In this study, leveraging the high-temperature tolerance of CsPbBr 3 perovskite, the sublimation and recrystallization processes were controlled, significantly improving the crystalline quality of the perovskite and suppressing the generation of the nonphotovoltaic CsPb 2 Br 5 phase. Furthermore, a continuous distribution of high-quality CsPbBr 3 crystals was achieved at the interface between the carbon electrode and the zirconium oxide layer, ensuring efficient collection of photogenerated holes. The photoelectric conversion efficiency of the printable mesoscopic all-inorganic perovskite solar cell was increased from 5.04 to 8.34% (with a record value of 10.04%) and achieved an ultrahigh open-circuit voltage of 1.54 V due to the significant improvement in the crystal quality of CsPbBr 3 . This study proposes a novel strategy to enhance the photovoltaic conversion performance of carbon-based all-inorganic perovskite solar cells by suppressing the presence of nonphotovoltaic phases.