Critical Strain-Induced Photoresponse in Folded Graphene Superlattices

Strain engineering is the most effective method to break the symmetry of the graphene lattice and achieve graphene band gap tunability. However, a critical strain (>20%) is required to open the graphene band gap, and it is very difficult to achieve such a large strain. This limits the development of experimental research and optoelectronic devices based on graphene strain. In this work, we report a method for preparing large-strain graphene superlattices via surface energy engineering. The maximum strain of the curved lattice could reach 50%. In particular, our pioneering work reports the behavior of an ultrafast (as short as 6 ps) photoresponse in a strained folded graphene superlattice. The photocurrent map shows a large increase (up to 102) of the photoresponsivity in the tensile graphene lattice, which is generated by the interaction between the strained and pristine graphene. Through Raman spectroscopy, Kelvin probe force microscopy, and high-resolution transmission electron microscopy, we demonstrate that the ultrathreshold strain in the graphene bends triggers the opening of the graphene band gap and results in a unique photovoltaic effect. This work deepens the understanding of the strain-induced change of the photoelectrical properties of graphene and proves the potential of strained graphene as a platform for the generation of novel high-speed, miniaturized graphene-based photodetectors.