Dry-Etchable Molecular Layer-Deposited Inhibitor Using Annealed Indicone Film for Nanoscale Area-Selective Deposition

In semiconductor production, the technology node of a device is becoming extremely small below 5 nm. Area selective deposition (ASD) is a promising technique for creating improved overlay or self-alignment, remedying a conventional top-down method. However, the conventional materials and process (self-assembled monolayer, polymer and carbon film fabricated by chemical vapor deposition, and spin coating) for ASD are not suitable for highly conformal deposition. Thus, we investigated a new strategy to deposit conformal films in ASD by molecular layer deposition (MLD). The MLD processes were conducted for an indicone film deposited by INCA-1 (bis(trimethysily)amidodiethyl indium) and hydroquinone (HQ), as well as an alucone film deposited by TMA (trimethylaluminum) and HQ. After thermal heat treatment of the MLD films, variations in thickness, refractive index, and constituent elements of the annealed MLD films were investigated. The indicone film was used as an inhibiting layer for ASD and was etchable with a dry-etching process. The reactive ion etching process on annealed indicone film was optimized according to plasma power, gas concentration, and working pressure. Ruthenium (Ru) ALD was then performed on the annealed MLD films to investigate nucleation delaying cycles and inhibiting properties. A patterned substrate with an MLD/Si line was created via the RIE process, which was allowed to observe the selectivity of the annealed MLD films. In addition, a patterned substrate of SiO2/annealed indicone/Mo was used to investigate the Ru-selective ALD at the nanoscale. The Ru thin film was selectively deposited on the Mo side-wall surface of a 3D trench structure. The growth of the Ru film was inhibited selectively on an annealed indicone surface of approximately 5 nm.