Low-Power Complementary Logic Circuit Using Polymer-Electrolyte-Gated Graphene Switching Devices

The modulation of the electrical properties of graphene and its device configurations for low-power consumption are important in developing graphene-based logic electronics. Here, we demonstrate the change in the charge transport in graphene from ambipolar to unipolar using surface charge transfer doping of the polymer electrolyte. Unipolar graphene field-effect transistors (GFETs) were obtained by the surface treatment of poly(acrylic acid) (PAA) for p-type and poly(ethyleneimine) (PEI) for n-type as polymer-electrolyte gates. In addition, lithium perchlorate (LiClO4) in a polymer matrix can be used for the low-gate voltage operation of GFETs (less than ±3 V) because of its high gating efficiency. Using polymer-electrolyte-gated GFETs, complementary graphene inverters were fabricated with a voltage swing of 57% and maximum voltage gain (Vgain) of 1.1 at a low supply voltage (VDD = 1 V). This is expected to facilitate the development of graphene-based logic devices with low-cost, low-power, and flexible electronics.