Wafer-Sized CsPbBr₃/CsPbCl₃ Heterojunction: Breaking the Trade-Off between Sensitivity and Dark Current for Efficient X-ray Detector

Polycrystalline lead halide perovskite finds promising use in fabricating X-ray detectors with a large lateral size, adjustable thickness, and diverse synthesis processes. However, a large dark current hinders its development for weak signal detection. Herein, we propose a multistep pressing strategy for manufacturing a CsPbBr 3 /CsPbCl 3 heterojunction wafer for a reduced dark current X-ray detector, and the device keeps a high sensitivity value after the insertion of a barrier by heterojunction; thus, the trade-off between sensitivity and dark current can be broken. The X-ray detector with a metal–semiconductor–metal structure yields a sensitivity of 6.32 × 10 4 μC Gy air –1 cm –2 at a bias of 12 V, a 1/ f noise of 1.02 × 10 –13 A/Hz –1/2, and a detection limit of 66.58 nGy s –1 . These performance parameters are considerably better than those of a similar X-ray detector based on the single-structure wafer. The improved device performance of the heterostructure X-ray detector is ascribed to the suppressed carrier recombination, enhanced carrier transportation of the heterojunction, and strong X-ray attenuation of the CsPbCl 3 layer. The pixel array device is further used in imaging applications. Hence, this study provides an efficient strategy for fabricating heterostructure polycrystalline lead halide perovskite wafers for use in high-performance wafer-based X-ray detectors.