Enhanced Photovoltaic Effect in n-3C-SiC/p-Si Heterostructure Using a Temperature Gradient for Microsensors
Source abstract
Abstract
The development of fifth-generation (5G) communications and the Internet of Things (IoT) has created a need for high-performance sensing networks and sensors. Improving the sensitivity and reducing the energy consumption of these sensors can improve the performance of the sensing network and conserve energy. This paper reports a large enhancement of the photovoltaic effect in a 3C-SiC/Si heterostructure and the tunability of the photovoltage under the impact of a temperature gradient, which has the potential to increase the sensitivity and reduce the energy consumption of microsensors. To start with, cubic silicon carbide (3C-SiC) was grown on a silicon wafer, and a micro-3C-SiC/Si heterostructure device was then fabricated using standard photolithography. The result revealed that the sensor could either capture light energy, transform it into electrical energy for self-power purposes, or detect light with intensities of 1.6 and 4 mW/cm 2 . Under the impact of the temperature gradient induced by conduction heat transfer from a heater, the measured photovoltage was improved. This thermo-phototronic coupling enhanced the photovoltage up to 51% at a temperature gradient of 8.73 K and light intensity of 4 mW/cm 2 . Additionally, the enhancement can be tuned by controlling the direction of the temperature gradient and the temperature difference. These findings indicate the promise of the temperature gradient in SiC/Si heterostructures for developing high-performance temperature sensors and self-powered photodetectors.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon Carbide Semiconductor Technologies · Nanowire Synthesis and Applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Engineering, University of Southern Queensland, Toowoomba, Queensland 4350, Australia
Centre for Future Materials, University of Southern Queensland, Toowoomba, Queensland 4350, Australia
School of Mechanical and Manufacturing Engineering, University of New South Wales, Sydney, New South Wales 2052, Australia
Queensland Micro- and Nanotechnology Centre, Griffith University, Nathan, Queensland 4111, Australia
Funding
Australian Research Council
References (39)
Show source-provided references
1. 10.1002/aelm.20190077610.1002/aelm.201900776 ↗
2. 10.1088/1361-6439/ac3ab910.1088/1361-6439/ac3ab9 ↗
3. 10.1038/s41928-019-0363-610.1038/s41928-019-0363-6 ↗
4. 10.1038/s41598-021-96689-710.1038/s41598-021-96689-7 ↗
5. 10.1016/j.rser.2017.10.09410.1016/j.rser.2017.10.094 ↗
6. 10.1016/j.jclepro.2019.11882010.1016/j.jclepro.2019.118820 ↗
7. 10.1038/s41467-021-21106-610.1038/s41467-021-21106-6 ↗
8. 10.1038/nchem.208510.1038/nchem.2085 ↗
9. 10.1109/SENSORS52175.2022.996700410.1109/SENSORS52175.2022.9967004 ↗
10. 10.1016/j.nanoen.2020.10495710.1016/j.nanoen.2020.104957 ↗
11. 10.1016/j.nantod.2022.10139910.1016/j.nantod.2022.101399 ↗
12. 10.1016/j.nanoen.2022.10703010.1016/j.nanoen.2022.107030 ↗
13. 10.1109/TIE.2010.210232110.1109/TIE.2010.2102321 ↗
14. 10.1002/adom.20210246810.1002/adom.202102468 ↗
15. 10.1002/adfm.20210890310.1002/adfm.202108903 ↗
16. 10.1016/j.sna.2009.12.01810.1016/j.sna.2009.12.018 ↗
17. 10.1016/j.protcy.2014.10.20610.1016/j.protcy.2014.10.206 ↗
18. 10.1002/adma.20170577810.1002/adma.201705778 ↗
19. 10.3390/s10010006110.3390/s100100061 ↗
20. 10.1038/s41586-021-03259-y10.1038/s41586-021-03259-y ↗
21. 10.1038/s41586-020-2038-x10.1038/s41586-020-2038-x ↗
22. 10.1039/C7TC05271E10.1039/C7TC05271E ↗
23. 10.1109/TED.2019.289974210.1109/TED.2019.2899742 ↗
24. 10.1016/j.nanoen.2021.10669410.1016/j.nanoen.2021.106694 ↗
25. 10.1002/adfm.20170333110.1002/adfm.201703331 ↗
26. 10.1016/j.nanoen.2022.10814010.1016/j.nanoen.2022.108140 ↗
27. 10.1038/s41467-022-29455-610.1038/s41467-022-29455-6 ↗
28. Nguyen, H.; Nguyen, T.; Van Nguyen, D.; Phan, H.P.; Nguyen, N.T.; Dao, D.; Bell, J.; Dinh, T. Thermo-Phototronic Effect for Self-Powered Photodetector Using n-3C-SiC/p-Si Heterostructure. In IEEE Sensors, 2022, IEEE; pp 1–4. https://ieeexplore.ieee.org/abstract/document/9967105.10.1109/SENSORS52175.2022.9967105 ↗
29. 10.1016/j.nanoen.2021.10626810.1016/j.nanoen.2021.106268 ↗
30. 10.1126/sciadv.aay267110.1126/sciadv.aay2671 ↗
31. 10.1021/acsami.9b1585510.1021/acsami.9b15855 ↗
32. 10.1016/j.snb.2012.12.05910.1016/j.snb.2012.12.059 ↗
33. Phan H.-P. · 2017 · 110.1007/978-3-319-55544-7 ↗
34. 10.1002/smll.20210177510.1002/smll.202101775 ↗
35. 10.1039/C6NR06236A10.1039/C6NR06236A ↗
36. 10.1038/ncomms401110.1038/ncomms4011 ↗
37. Kasap, S. Principles of Electronic Materials and Devices; 4th ed. 2018; pp 411–526.
38. 10.1021/acsami.8b0254310.1021/acsami.8b02543 ↗
39. 10.1002/admt.20170020810.1002/admt.201700208 ↗