Improving FAPbBr₃ Perovskite Crystal Quality via Additive Engineering for High Voltage Solar Cell over 1.5 V

Lead bromide-based perovskites are promising materials as the top cells of tandem solar cells and for application in various fields requiring high voltages owing to their wide band gaps and excellent environmental resistances. However, several factors, such as the formation of bulk and surface defects, impede the performances of corresponding devices, thereby limiting the efficiencies of these devices as single-junction devices. To reduce the number of defect sites, urea is added to the formamidinium lead bromide (FAPbBr 3 ) perovskite material to increase its grain size. Nevertheless, urea undesirably reacts with lead(II) bromide (PbBr 2 ) in the perovskite structure, creating unfavorable impurities in the device. To solve this problem, herein, in addition to urea, we introduced formamidinium chloride (FACl) into FAPbBr 3 . Owing to the synergistic effect of urea and FACl, the FAPbBr 3 film quality effectively improved due to suppression of the generation of impurities and stabilization of film crystallinity. Consequently, the FAPbBr 3 single-junction solar cell constructed using FACl and urea as additives demonstrated a power conversion efficiency of 9.6% and an open-circuit voltage of 1.516 V with negligible hysteresis. This study provides new insights into the use of additive engineering for overcoming the energy losses caused by defects in perovskite films.