Selective Control of Novel TiO₂ Nanorods: Excellent Building Blocks for the Electron Transport Layer of Mesoscopic Perovskite Solar Cells

Novel TiO 2 nanorods (NRs) with various lengths of 70–200 nm and uniform widths of 46–48 nm are selectively synthesized by a solvothermal reaction under a basic environment. The length of TiO 2 NRs is reproducibly tuned by varying the concentration of tetramethylammonium hydroxide (TMAH), while the NRs in the pure anatase phase are grown in the [001] direction, caused by the preferential binding affinity of TMAH to the TiO 2 (101) facet. TiO 2 NRs of various lengths are then applied to form the electron transporting layer (ETL) of mesoscopic perovskite solar cells (PSCs). We found that PSC devices with NRs exhibit superior photovoltaic (PV) performance to those with conventional 46 nm-sized TiO 2 nanoparticles (NP46). Particularly, the PSC with TiO 2 NRs of 110 nm length (NR110) exhibits the optimum PV conversion efficiency (PCE): the average PCE is 22.64% with a V OC of 1.137 V, a J SC of 24.60 mA·cm –2, and a FF of 80.96%, while the champion PCE is 23.18%. In addition, the PSC with NR110 (PSC-NR110) reveals significantly improved long-term stability in air with a relative humidity of 40–50%. In 1000 h, its PCE is reduced by only 9% whereas that of PSC with NP46 decreases by 25%. The PSC properties analyzed by impedance spectroscopy and J – V curve measurements under dark conditions and at various light intensities provide evidence that PSC-NR110 has fewer defects and shows significantly reduced charge recombination. We discuss the advantages of NR structures in preparing the ETL of PSC devices and also explain why the charge recombination is suppressed.