Patterned Sandwich-Type Silver Nanowire-Based Flexible Electrode by Photolithography

Silver nanowires (AgNWs) are one of the important flexible electrode material candidates that can replace brittle indium tin oxide (ITO). In this work, we demonstrated novel patterned sandwich-type AgNW-based transparent electrodes easily prepared using the photolithography method for application in flexible devices. A cross-linked underlayer was introduced to increase the adhesion properties between a poly(ethylene terephthalate) substrate and AgNWs, and as a result, a uniform AgNW layer was easily deposited. Finally, the AgNW layer could be easily patterned by introducing a photocross-linkable upper layer without lift-off, dry transfer, and removal methods. A mixture of poly(sodium-4-styrene sulfonate) (PSS–Na+) and 2,4-hexadiyne-1,6-diol (HDD), which is a component of the upper layer, exhibited good cross-linking properties as well as excellent adhesion to the AgNW layer. Through the above method, it was possible to easily fabricate a patterned electrode with smooth surface morphology. Moreover, AgNW-based patterned electrodes exhibit good optical and electrical properties (Rs = 29.8 Ω/□, T550 nm = 94.6%), making them suitable for optoelectronic devices. Flexible polymer solar cells (PSCs) using patterned AgNW electrodes showed a high power conversion efficiency of over 10%, which is comparable to that of PSCs using rigid ITO electrodes. In addition, the high mechanical stability of AgNW-based PSCs was confirmed by bending experiments.