Electrically Modulated Near-Infrared/Visible Light Dual-Mode Perovskite Photodetectors

Dual-mode photodetectors (PDs) have attracted increasing interest owing to their potential optoelectrical applications. However, the widespread use of PDs is still limited by the high cost of epitaxial semiconductors. In contrast, the solution processability and wide spectral tunability of perovskites have led to the development of various inexpensive and high-performance optoelectronic devices. In this study, we develop a high-performance electronically modulated dual-mode PD with near-infrared (NIR) narrowband and visible light broadband detection based on organic–inorganic hybrid methylammonium lead halide perovskite (MAPbX3; MA = CH3NH3 and X = Cl, Br, and I) single crystals with a pnp configuration. The operating mode of the dual-mode PD can be switched according to voltage bias polarity because the photon absorption region and carrier transport performance are tuned at different bias voltages. The dual-mode PD exhibits a NIR light responsivity of 0.244 A/W and a narrow full width at half-maximum of ∼12 nm at 820 nm at positive voltages and an average visible light responsivity of ∼0.13 A/W at negative voltages. The detectivities of both modes are high (∼1012 Jones), and the linear dynamic range is wide (>100 dB). Our study provides a new method for fabricating multifunctional PDs and can expand their application in integrated imaging systems.