Tuning Perovskite Crystal Growth Dynamics Using Additives on Textured Silicon Substrates

Double‐sided textured silicon solar cells with micrometer‐sized pyramid structure are used as bottom cells in monolithic tandem structures to decrease reflection losses. As top cell material, frequently perovskites are used. In this work, various additives are investigated to enhance the perovskite absorber quality, as a top cell fabricated using the hybrid route. In the context of the hybrid route, it is found that urea or methylammonium chloride (MACl) can effectively increase the grain size and improve the absorber quality, while formamidinium chloride (FACl) cannot. With urea, the crystallization can be tuned without leaving any voids in the film (unlike MACl). However, when annealed at a high annealing temperature, the excessive crystal growth with urea causes non‐conformal coating and high defect density. By adjusting the annealing conditions and additive concentration, the crystal growth of the perovskite top cell on the micrometer‐sized silicon pyramids can be fine‐tuned, ensuring that the perovskite layer conformally coated the pyramids. The use of additives not only improves crystallization but also enhances the conversion of the inorganics, particularly at the hole transport layer (HTL) interface. Moreover, this work contributes to a better understanding of perovskite crystallization dynamics and how to control it, especially on textured substrates.