The influence of different powder-preparing techniques on properties of potassium-sodium niobium lead-free piezoelectric ceramics
Source abstract
Abstract
It is noticeable that enhanced properties of KNN based lead-free piezoelectric ceramics can be obtained not only via doping, substitution and sintering-aid adding, but also via modified ceramic-preparing techniques. In order to optimize the modified ceramic-preparing techniques which can be practically used in lead-free piezoelectric ceramics preparation, three kinds of powder-preparing techniques were tested in present studies, including the conventional mixed-oxide method, the conventional mixed-oxide method with active carbon adding in raw material and the method for different patches of pre-synthesized powder then mixing, and the effects of the processing techniques on the crystallite phase, microstructure and electrical properties of KNN lead-free piezoelectric ceramics were analyzed. It is concluded that by using the technique of the conventional mixed-oxide method with active carbon adding in raw material much better crystalline and compact KNN ceramics can be obtained, and the pure KNN ceramics show much better dielectric, piezoelectric and ferroelectric properties (d33=116pC/N,kp=0.37,e=630,tanδ=0.034,Pr=22.40μC/cm2,Ec=0.675kV/mm,Tc=405℃).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Acoustic Wave Resonator Technologies · Ferroelectric and Piezoelectric Materials · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.