article·2014-01-01Open access

High pressure high temperature synthesis of BiMnOP_3 and its structure and magnetic properties

Jia Hong-shen

Open full text

Abstract

The BiMnO3 sintered body with perovskite structure was prepared,using Bi2O3,MnO2 and Mn powders as starting materials( n( Bi2O3) /n( MnO2) /n( Mn) = 2 ∶ 3 ∶ 1),under high temperature and high pressure( HPHT,3-5GPa,600-800 ℃) conditions in a China CS-IV type cubic-anvil high pressure apparatus( CHPA). The sintered samples were tested and analyzed by using X-ray diffraction( XRD),scanning electron microscopy( SEM) and vibrating sample magnetometer( VSM),and the effects of sintering temperature and pressure on the sample structure,morphology and magnetic properties were studied. The experimental results show that: when the sintering temperature was 600 ℃,the grains of perovskite BiMnO3 begin to form; with the increase of temperature,the relative content of BiMnO3 increases and the saturation magnetization increases gradually. While the saturation magnetization increases first and then decreases with the pressure increases; the coercivity decreases with decreasing of grain size. The optimum experimental synthesis conditions of BiMnO3single-phase with perovskite structure are 4 GPa,800 ℃,1 h,and its Curie temperature was 99 K. Under the test-temperature of 90 K,the maximum saturation magnetization and minimum coercivity were 35 A·m2/kg and 37. 6×79. 6 A /m respectively.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Multiferroics and related materials · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.