article·2008-01-01Open access

Preparation of SrCo_(0.8)Fe_(0.1)Sn_(0.1)O_(3-δ) tubular membranes for oxygen separation

Chusheng Chen

Open full text

Abstract

In this article,the preparation and characterization for dense SrCo0.8Fe0.1Sn0.1O3-δ(SSCF) tubular membrane were presented,and the later included the measurements of phase composition and oxygen permeation.The SSCF tubular membranes were prepared by traditionally plastic extrusion,and it was found that the deionized water in plastic paste did not change the feature of dual phase compositions of cubic perovskites for SSCF ceramics after the green compact fired at 1270℃.The as-prepared SSCF tubular membrane(with wall thickness of 1.35mm) had the promising permeation properties,i.e.a permeation rate of 0.5×10-6mol/(cm2·s) at 900℃ only under a little oxygen partial pressure gradient of PO2(h)=0.211×105Pa/PO2(l)=0.12×105Pa,and an unchanged permeation flux of 1.2×10-6mol/(cm2·s) at 940℃ during 160hrs operation by sweeping its inside with 75ml/min helium.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.