article·2005-01-01Open access

Electrical properties and preparation Ca~(2+)and Sr~(2+) co-doped lanthanum iron cobaltite

Gao Wen-yuan, Sun Jun-cai

Open full text

Abstract

La_(0.7)Sr_(0.3-x)Ca_xCo_(0.9)Fe_(0.1)O_(3-δ)(LSCCF, x =0.05~0.20) nanocrystalline powders as the cathode materials for intermediate temperature solid oxide fuel cells were synthesized by chemical co-precipitation method using metal nitrates as starting materials and ammonia water as precipitant. The formation process, the crystal structure and the particle size micrograph of LSCCF powders were investigated with DSC-TG,XRD and SEM. The experimental results show that the formation process of LSCCF in heating can be divided into dehydration decomposition of reactants, formation of LaCoO_3 based oxides and formation of doped LSCCF solid solution. Calcined the powders at 800℃ for 4h all of single perovskite phase can be obtained. The electrical conductivity of the specimens sintered at 1200℃ for 3h was measured by the four-probe DC method in the temperature range from 100℃ to 800℃ in air. With the measuring temperature rising, the conductivity increases and reaches to the peak value at 490℃then gradually decreases. The conduction mechanism was attributable to the adiabatic-hopping of small polarons below 490℃and the mixing effects caused by substituting Sr~(2+) and Ca~(2+) for La~(3+ ) at x=0.10 or 0.15 for LSCCF lead to the electrical conductivity being basically equal over 450℃. Otherwise the electrical conductivity of all doped specimens was higher than 400S/cm from 600℃ to 800℃, which can meet the electrical properties demands for the cathode materials.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.