Preparation for Pt thin films by pulsed laser deposition
Source abstract
Abstract
Epitaxial Pt films have been grown on (0001)-oriented sapphire substrate by pulsed laser deposition.The effects of temperature and laser energy on microstructure,surface morphology and electric properties were studied.X-ray diffraction studies show that single (111)-oriented Pt films on sapphire substrate were obtained and the optimum conditions were found to be as follows:growth temperature 650℃,pulse laser energy intensity 280mJ/pulse and deposition rate 1Hz.The full width at half maximum (FWHM) of (111) rocking curve is 0.068°of Pt film,indicating that the film is of a good quality.According to the atomic force microscopy (AFM),the surface of Pt film is atomically smooth and the root mean square roughness values (RMS) is 1.776nm.The results of four-probe measurement reveal that square resistance of Pt films is 1.962Ω/□.The as-deposited films could be used as bottom electrode for ferroelectric films.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Surface Roughness and Optical Measurements · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.