Preparation of PZN-PT-BT ferroelectric ceramics by modified two-step method
Source abstract
Abstract
Based on the columbite route proposed by Swartz and Shrout, pure perovskite 75Pb(Zn_(1/3)Nb_(2/3))O_3-10PbTiO_3-15BaTiO_3 solid-solution ceramics was synthesized by the modified two-step method. The ZnNb_2O_6 and PbO (additional 5mol%) were ball-milled and then pre-reacted at 660℃ for 1h. This pre-reacted mixture was wet mixed with the corresponding amounts of TiO_2 and BaCO_3 powders, and ball milled and dried again. Then the samples were sintered in a double sealed Al_2O_3 crucible at 1060~1140℃ for 2h. Although there was not any perovskite phase in the precursor powder analyzed by XRD, the ceramic specimens fired at 1060~1140℃ for 2h were 100% perovskite phase. The low pre-reacting temperature prevents PbO evaporation during the processing. Comparing with the columbite route, the processing was simplified and the pre-reacted temperature was decreased, the sintering temperature was broadened, the dielectric properties of sintered samples were improved in the modified method. Dielectric constant e, by the same thermal annealing, has a huge increase of up to 95% for the ceramics samples sintered at 1100℃ and a sharp decrease of up to 16% for the ceramics samples sintered at 1140℃, respectively.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.