The preparation and performance of n-type FeSi_2/Bi_2Te_3 segmented thermoelectric material
Source abstract
Abstract
The segmented thermoelectric material of n type β FeSi 2/Bi 2Te 3 has been prepared by means of dip coating procedure and using pure tin as the bridge material. It was found that the apparent Seebeck coefficients of the segmented materials were in direct proportional to the average temperature applied between hot and cold side, which was obviously higher than those of the monolithic ones (β FeSi 2 and Bi 2Te 3) in the same temperature range. The measurements showed that the maximum power outputs of the segmented materials were about 2 to 2.5 times of the monolithic ones, and remained unchanged when the materials have been annealed at 190℃ for 200h. The microstructure of the interfaces show no visible diffusion of tin in the semiconductor matrixes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgical and Alloy Processes · Advanced Thermoelectric Materials and Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.