LASERS IN ENGINEERING

Mahmoud Moradi, Mojtaba Karami Moghadam, Zeinab Malekshahi Beiranvand

Abstract not available. Bibliographic information is searchable.

Jie Wang, Lijun Xu, Fan Yu, Xingtong Guo et al.

Abstract not available. Bibliographic information is searchable.

Cheng‐Yang Liu, S.H. Lin, Chien Jong Shih

Abstract not available. Bibliographic information is searchable.

David Waugh, J. Lawrence

Abstract not available. Bibliographic information is searchable.

Subhasisa Nath, I. Manna, S. K. Ray, Jyotsna Dutta Majumdar

Abstract not available. Bibliographic information is searchable.

Jyotsna Dutta Majumdar, I. Manna, J. Lawrence

Abstract not available. Bibliographic information is searchable.

R. Jagdheesh, A. Valarmathi, M. Sivakumar

Abstract not available. Bibliographic information is searchable.

R. Jagdheesh, A. Valarmathi, M. Sivakumar

Abstract not available. Bibliographic information is searchable.

Christof Schulz, X-S. Cai, Bin Yang, H-N. Yang et al.

Abstract not available. Bibliographic information is searchable.

Zhenao Bai, Zixuan Bai, M. Chen, G. Li

Abstract not available. Bibliographic information is searchable.

Zixuan Bai, Xuejin Gao, Long Chen, Jia‐Xing Jiang et al.

Abstract not available. Bibliographic information is searchable.

Ka Wai Ng, J. Lawrence, H.C. Man, T.M. Yue et al.

The factors responsible for modifications to the wettability characteristics of a nickel-titanium (NiTi) medical alloy following CO 2 laser treatment were considered in this work. These modifications have been investigated in terms of the changes in the surface energy components, the surface topography and the surface chemical composition profile. Contact angles, q, were measur…

Kristison Zakaria, Kenny Dalgarno

This paper reports on an investigation of dimensional accuracy in additive manufacturing (AM) specifically an indirect metal laser sintering (IMLS) technique. An experimental programme with a series of simple parts has been carried out to establish dimensional accuracy of metal parts made using the three-dimensional (3-D) systems of indirect SLS process. In parallel basic engin…

Shiang-Kuo Chang-Jian, Jeng-Rong Ho, J.-W. John Cheng

Abstract not available. Bibliographic information is searchable.

David Waugh, J. Lawrence

Abstract not available. Bibliographic information is searchable.

Peter George Eveleigh Jerrard, Liang Hao, Sasan Dadbakhsh, K. E. Evans

Consolidation behaviour and microstructural characteristics of Al and a mixture of Al-Cu alloy powders following selective laser melting processing

Abdurrahman Geymen

Abstract not available. Bibliographic information is searchable.

Mohammed M. Fadhali, Jasman Zainal, Yusuf B. Munajat, Jalil B. Ali et al.

In this paper we discuss some investigations and analyses of the various parameters, which contribute to increase the coupling efficiency of a laser diode to a single mode fiber-coupling using the lens coupling, which provides a coupling efficiency of about 75% at the optimum working distance. The separation between the coupling optics and the single mode fiber is in the range …

J. Lawrence, Darren Evans

Abstract not available. Bibliographic information is searchable.

J. Lawrence, H. R. Chew, C. K. Chong, Liang Hao

Abstract not available. Bibliographic information is searchable.