Low-temperature growth and characterization of neodymium-substituted bismuth titanate nanowires in a highly ordered anodic aluminum oxide template by an AC electrodeposition method on the platinum substrate for ferroelectric applications
Source abstract
Abstract
Abstract Highly ordered neodymium-substituted bismuth titanate (BNdT) nanowires were prepared using anodic aluminum oxide (AAO) template method. The microstructures of AAO templates and neodymium-substituted bismuth titanate (BNdT) nanowires were investigated using a field emission scanning electron microscope (FESEM). Diameter distribution of the BNdT nanowires indicated that the average diameter was about 28 nm with a length of 300 nm. X-ray diffraction pattern confirms that the BNdT nanowires crystallized in the orthorhombic phase with a high degree of crystallinity. In addition, the lattice constant and the peak position of the (171) peak of bismuth titanate shows a small value of contraction with neodymium (Nd) substitutions. The electrical measurements were conducted on metal-ferroelectric-semiconductor-metal (MFSM) capacitors. Current–voltage (I–V) characteristic response of the BNdT nanowires shows a low leakage current and high insulating properties at low voltages. Polarization–electric field (P–E) response of BNdT shows a good ferroelectric property for all samples at room temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Nonlinear optical properties of neodymium-doped bismuth titanate thin films using Z-scan technique10.1063/1.1667618 ↗
2. Tuning the structural and optical properties of bismuth titanate by different Nd substitution content
3. Preparation and properties of neodymium-modified bismuth titanate ceramics10.1016/j.jeurceramsoc.2007.10.010 ↗
4. Micro structural, Raman and XPS properties of single-crystalline Bi3.15Nd0.85Ti3O12 nanorods10.1016/j.matchemphys.2008.09.034 ↗
5. Retention characteristics of lanthanum-doped bismuth titanate films annealed at different furnaces10.1016/j.matchemphys.2008.12.028 ↗
6. A new ferroelectric memory device, metal-ferroelectric-semiconductor transistor10.1109/T-ED.1974.17955 ↗
7. Fabrication of nanocomposite electrode based on Bi4−xNdxTi3O12 perovskite supported by silicon microchannel plates for high performance electrochemical capacitors10.1016/j.jallcom.2014.09.095 ↗
8. Characteristics of metal–ferroelectric–insulator–semiconductor structure using a Nd-doped Bi4Ti3O12 ferroelectric layer10.1016/j.jcrysgro.2004.04.015 ↗
9. Raman scattering, electronic, and ferroelectric properties of Nd modified Bi4Ti3O12 nanotube arrays10.1063/1.3407563 ↗
10. DC electrochemical deposition of CdSe nanorods array using porous anodic aluminum oxide template10.1016/S0921-5093(00)01951-1 ↗
11. Fabrication of in situ ultra thin anodic aluminum oxide layers for nanostructuring on silicon substrate10.1063/1.2767768 ↗
12. Synthesis, structural characterization and formation mechanism of giant-dielectric CaCu3Ti4O12 nanotubes
13. Synthesis and characterization of Bi3.15Nd0.85Ti3O12 nanotube arrays10.1016/j.jcrysgro.2009.08.019 ↗
14. Low-temperature growth of ZnO nanorods in anodic aluminum oxide on Si substrate by atomic layer deposition
15. Template method for fabricating interdigitate p–n heterojunction for organic solar cell
16. Controllable fabrication of porous alumina templates for nanostructures synthesis10.1016/j.matchemphys.2010.02.023 ↗
17. Fabrication of patterned polystyrene nanotube arrays in an anodic aluminum oxide template by photolithography and the multiwetting mechanism10.1021/jp904254s ↗
18. Fabrication of vertically aligned Pd nanowire array in AAO template by electrodeposition using neutral electrolyte10.1007/s11671-010-9616-z ↗
19. AAO-template assisted fabrication of cadmium solenoid nanostructures
20. Determination of crystallite size with X-ray spectrometer10.1063/1.1699612 ↗
21. Structural and electrical characteristics of Bi3.5Sm0.5Ti3O12 thin films on Si (100)10.1016/j.jcrysgro.2004.01.021 ↗
22. Effect of neodymium substitution on the growth of single crystalline Bi4Ti3O12 particles10.1016/j.matlet.2006.01.102 ↗
23. X-Ray diffraction signatures of defects in nanocrystalline materials
24. Electrical properties of Sm-doped bismuth titanate thin films prepared on Si (100) by metalorganic decomposition10.1016/j.materresbull.2004.04.013 ↗
25. Structural and electrical properties of Sm-doped bismuth titanate thin films on Si (100) by metalorganic decomposition10.1016/j.matlet.2004.05.024 ↗
26. Structural, morphology and electrical studies of Sm-modified bismuth titanate thin films on Si (100)10.1016/j.jssc.2004.05.016 ↗
27. Ferroelectric and dielectric properties of bismuth neodymium titanate ceramics prepared using sol–gel derived fine powders10.1016/j.physleta.2005.07.063 ↗
28. Ferroelectric properties and microstructures of Nd2O3-doped Bi4Ti3O12 ceramics10.1002/pssa.200306673 ↗
29. Enhancement on effective piezoelectric coefficient of Bi3.25Eu0.75Ti3O12 ferroelectric thin films under moderate annealing temperature10.1016/j.tsf.2010.08.130 ↗
30. Dielectric and ferroelectric properties of highly (100)-oriented (Na0.5Bi0.5)0.94Ba0.06TiO3 thin films grown on LaNiO3/γ-Al2O3/Si substrates by chemical solution deposition10.1016/j.solidstatesciences.2007.10.026 ↗
31. The microstructure and ferroelectric properties of Sm and Ta-doped bismuth titanate ferroelectric thin films10.1016/j.tsf.2012.10.074 ↗