Microstructure and electrical properties of xY2O3-(1-x)LaCrO3 thermosensitive ceramics prepared by spark plasma sintering
Source abstract
Abstract
Abstract The high temperature, negative temperature coefficient (NTC), thermosensitive ceramics xY2O3-(1-x)LaCrO3 (x = 0.4, 0.5, 0.6, 0.7) were prepared via spark plasma sintering. The effects of components, sintering temperature, and sintering pressure on the electrical properties of the composite ceramics were studied. The composite NTC ceramics were composed of orthogonal perovskite structure LaCrO3 and Y2O3. The presence of Cr3+ and Cr4+ was confirmed using X-ray photoelectron spectroscopy, which may be responsible for the hopping conduction. The composite NTC ceramics sintered at 1500 °C had good electrical properties. The resistivities and the coefficient of temperature sensitivity (B) increased with the rise in Y2O3 content. The values of ρ250, ρ700, B400/700, and activation energy of xY2O3-(1-x)LaCrO3 composite NTC ceramics sintered at 1500 °C were 1.7 × 1010–5.51 × 1010 Ω cm, 4.32 × 104–6.16 × 106 Ω cm, 14,111–16,223 K, and 1.221–1.403 eV, respectively. The composite NTC ceramics prepared at different sintering pressures displayed identical electrical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrical and Thermal Properties of Materials · Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. The effect of ZnO content and sintering temperature on the electrical properties of Cu-containing Mn1.95xNi0.45Co0.15Cu0.45ZnxO4(0≤x≤0.3) NTC thermistors10.1016/j.jallcom.2008.07.076 ↗
2. High temperature NTC BaTiO3-based ceramic resistors10.1016/j.matlet.2005.06.065 ↗
3. Influence of the composition on the electrical properties of (Mn2.1-xNi0.9Six)O4 negative temperature coefficient thermistors
4. High temperature NTC ceramic resistors(ambient–1000 °C)10.1016/S0955-2219(03)00376-5 ↗
5. New high temperature NTC thermistors based on the Mg(Al1-xCrx)2O4 ceramics10.1016/j.jallcom.2016.05.301 ↗
6. Synthesis and NTC properties of YCr1−xMnxO3 ceramics sintered under nitrogen atmosphere10.1016/j.jeurceramsoc.2010.12.025 ↗
7. La2O3-doped 0.6Y2O3-0.4YCr0.5Mn0.5O3 composite NTC ceramics for wide range of temperature sensing10.1016/j.jallcom.2013.07.060 ↗
8. MgAl2O4-LaCr0.5Mn0.5O3 composite ceramics for high temperature NTC thermistors
9. Preparation, structure and electrical properties of La1-xBaxCrO3 NTC ceramics
10. New NTC thermistors based on LaCrO3-Mg(Al0.7Cr0.3)O4 composite ceramics
11. LaCr1-xFexO3 (0≤x≤0.7): a novel NTC ceramic with high stability10.1016/j.jeurceramsoc.2020.05.081 ↗
12. A study based on the oxidation vaporization of LaCrO310.1111/jace.15109 ↗
13. Spark plasma sintering (SPS) of transparent magnesium-aluminate spinel10.1007/s10853-007-1672-0 ↗
14. Microstructure and mechanical properties of B4C-TiB2 composite ceramic fabricated by reactive spark plasma sintering10.1016/j.ijrmhm.2020.105307 ↗
15. Improvement in microstructure and mechanical properties of Ti(C, N) cermet prepared by two-step spark plasma sintering10.1016/j.ceramint.2018.09.241 ↗
16. Properties of TiC and TiN reinforced alumina-zirconia composites sintered with spark plasma technique10.3390/met9111220 ↗
17. Rapid preparation of dense (La0.9Sr0.1)CrO3 ceramics by spark-plasma sintering10.1149/1.1394006 ↗
18. Spark plasma sintering of MgAl2O4–YCr0.5Mn0.5O3 composite NTC ceramics10.1016/j.jeurceramsoc.2014.03.025 ↗
19. Spark plasma sintering of MgAl2O4-LaCr0.5Mn0.5O3 composite thermistor ceramics and a comparison investigation with conventional sintering10.1016/j.jallcom.2016.03.139 ↗
20. New negative temperature coefficient thermistor ceramics in (Y2O3 + CeO2)-LaCr0.5Mn0.5O3 composite system
21. Densification kinetics of binary borosilicate glass composite10.1557/JMR.1994.0486 ↗
22. New NTC thermistors based on LaCrO3-Mg(Al0.7Cr0.3)2O4 composite ceramics
23. Preparation and characterization for LaMnO3 and 0.3LaMnO3–0.7Y2O3 high temperature bilayer structure NTC thermistors
24. Improving the thermal stability and photocatalytic activity of nanosized titanium dioxide via La3+ and N co-doping10.1016/j.apcatb.2010.10.006 ↗
25. X-ray photoelectron spectroscopic studies of CrO2 and some related chromium compounds10.1016/S0022-4596(76)80012-6 ↗
26. Microstructural and electrical properties of Y0.2Al0.1Mn0.27-xFe0.16Ni0.27-x(Cr2x)oy for NTC thermistors10.1016/j.ceramint.2015.01.075 ↗
27. Oxidation/vaporization kinetics of Cr2O310.1111/j.1151-2916.1971.tb12225.x ↗
28. A study based on the oxidation vaporization of LaCrO310.1111/jace.15109 ↗
29. Negative temperature coefficient resistance (NTCR) ceramic thermistors: an industrial perspective10.1111/j.1551-2916.2009.02990.x ↗
30. Polaron hopping conduction and thermoelectric power in LaMnO[sub 3+δ]10.1063/1.1362411 ↗
31. Electrical properties of perovskite-type La(Cr1- xMnx)O3+δ10.1016/S0921-4526(99)00201-X ↗
32. LaMn1-xTixO3-NiMn2O4(0≤x≤0.7): a composite NTC ceramic with controllable electrical property and high stability10.1016/j.jeurceramsoc.2019.03.003 ↗