Effect of Heat Treatment on CNT/TiO2 Photoelectrode for Dye-Sensitized Solar Cells Application
Source abstract
Abstract
In this research, the CNT/TiO2 nanocomposite solution was prepared using sol-gel method process. Definite amounts of CNT (0.06 g) were sonicated in 30 ml anhydrate 2-propanol. The measured quantities of Titanium (IV) Tetraisopropoxide (TTIP) – 5 ml were introduced into the CNT/2-propanol solution. The CNT/TiO2 paste was doctor-bladed onto the FTO glass and consequently annealed at 250 °C, 350 °C and 450 °C for 30 min. The effect of annealing temperatures on the CNT/TiO2 thin films was discussed. The CNT/TiO2 thin films were characterized for morphological and electrical performance by Field Emission Scanning Electron Microscopy (FESEM), X-ray Diffraction (XRD), Incident Photon to Charge Carrier Efficiency (IPCE) and IV-Curve Efficiency analysis. The XRD patterns show the thin films major peak at (101) with average anatase phase crystallite size. The CNT/TiO2 thin film's morphological structure composed of compressed and porous distributed composition. The crystal structures were changed upon increasing the annealing temperature. The IV measurement shows that the dye-sensitized solar cell (DSSC) at 450 °C produced highest photoelectric conversion efficiency (η) with 3.88 %. IPCE graph shows the solar cell absorb light within the UV spectrum region. It is revealed that annealing temperature has influence toward photovoltaic performance of the assembled DSSC.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Universiti Kebangsaan Malaysia (UKM)
University Kebangsaan Malaysia
Universiti Kebangsaan Malaysia
National University of Malaysia (UKM)
References (28)
Show source-provided references
1. Lewis NS, Crabtree GW, Nozik AJ, Wasielewski MR, Alivisatos AP (2005) Basic Energy Sciences Report on Basic Research Needs for Solar Energy Utilization. Office of Science, US Department of Energy 18–21.10.2172/899136 ↗
2. Dresselhaus MS, Thomas IL (2001) Alternative Energy Technologies. Nature 414: 332.10.1038/35104599 ↗
3. Crabtree GW, Dresselhaus MS, Buchanan MV (2004) The Hydrogen Economy. Phys. Today 57: 39.10.1063/1.1878333 ↗
4. O'Regan B, Grätzel M (1991) A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films. Nature 353: 737.10.1038/353737a0 ↗
5. Grätzel M (2001) Review article Photoelectrochemical cells. Nature 414: 338.10.1038/35104607 ↗
6. Grätzel M (2005) Solar Energy Conversion by Dye-Sensitized Photovoltaic Cells. Inorg. Chem. 44: 6841.10.1021/ic0508371 ↗
7. Chiba Y, Islam A, Watanabe Y, Komiya R, Koide N, Han L (2006) Dye-Sensitized Solar Cells with Conversion Efficiency of 11. 1 %. Jpn. J. Appl. Phys. 25: 638.10.1143/jjap.45.l638 ↗
8. Flahaut E, Peigney A, Laurent C, Marliere C, Chastel F, Rousset A (2000) Carbon nanotube-metal-oxide nanocomposites: microstructure, electrical conductivity and mechanical properties. Acta Mater. 48: 3803–3812.10.1016/s1359-6454(00)00147-6 ↗
9. Peng C, Snook GA, Fray DJ, Shaffer MS, Chen GZ (2006) Carbon nanotube stabilised emulsions for electrochemical synthesis of porous nanocomposite coatings of poly[3, 4-ethylene-dioxythiophene]. Chem. Commu. 44: 4629–4631.10.1039/b609293d ↗
10. Kongkanand A, Domı´nguezRM, Kamat PV (2007) Single wall carbon nanotube scaffolds for photoelectrochemical solar cells. Nano Lett. 7: 676–680.10.1021/nl0627238 ↗
11. Miller AJ, Hatton RA, Silva SRP (2006) Interpenetrating multiwall carbon nanotube electrodes for organic solar cells. Appl. Phys. Lett. 89: 1331171–1331173.10.1063/1.2357844 ↗
12. Lee TY, Alegaonkar PS, Yoo JB (2007) Fabrication of dye sensitized solar cell using TiO2 coated carbon nanotubes. Thin Solid Films 515: 5131–5135.10.1016/j.tsf.2006.10.056 ↗
13. Kim SL, Jang SR, Vittal R, Lee J, Kim KJ (2006) Rutile TiO2-modified multi-wall carbon nanotubes in TiO2 film electrodes for dye-sensitized solar cells. J. Appl. Electrochem. 36: 1433–1439.10.1007/s10800-006-9238-4 ↗
14. Heimer TA, Heilweil EJ, Bignozzi CA, Meyer GJ (2000) Electron Injection, Recombination and Halide Oxidation Dynamics at Dye-sensitized TiO2 Interfaces. J. Phys. Chem. A 18: 4256–4262.10.1021/jp993438y ↗
15. Kamat V, Haria M, Hotchandani S (2004) C60 Cluster as an Electron Shuttle in a Ru(II)-Polypyridyl Sensitizer Based Photochemical Solar Cell. J. Phys. Chem. B. 108: 5166–5170.10.1021/jp0496699 ↗
16. Chang H, Hsieh TJ, Chen TL, Huang KD, Jwo CS, Chien SH (2009) Dye-Sensitized Solar Cells Made with TiO2-Coated Multi-Wall Carbon Nanotubes and Natural Dyes Extracted from Ipomoea. Materials Transactions. 50: 2879-2884.10.2320/matertrans.m2009203 ↗
17. Kao MC (2011) Effect of annealing temperature of TiO2 thin films for application in dye-sensitized solar cells. Hsiuping Journal 125-134.
18. Kan Z, Feng JZ, Ming LC, Won CO (2011) Comparison of catalytic activities for photocatalytic and sonocatalytic degradation of methylene blue in present of anatase TiO2–CNT catalysts. UltrasonicsSonochemistry18: 765–772.10.1016/j.ultsonch.2010.11.008 ↗
19. Yu Y, Yu JC, Yu JG, Kwok YC, Che YK, Zhao JC, Ding L, Ge WK, Wong PK (2005) Enhancement of photocatalytic activity of mesoporous TiO2 by using carbon nanotubes. Appl. Catalysis A: General289-186.10.1016/j.apcata.2005.04.057 ↗
20. Abdullah H, Ariyanto NP, Shaari S, Yuliarto B, Junaidi S (2009) Study of Porous Nanoflake ZnO for Dye-Sensitized Solar Cell Application. American J of Engineering and Applied Science 2 1: 236-240.10.3844/ajeas.2009.236.240 ↗
21. Yu Y, Ma LL, Huang WY, Du FP, Yu JC, Yu JG, Wang JB, Wong PK (2005) Sonication assisted deposition of Cu2O nanoparticles on multiwall carbon nanotubes with polyol process. Carbon43: 651.10.1016/j.carbon.2004.10.031 ↗
22. Lee KM, Suryanarayanan V, Huang JH, Justin Thomas KR, Lin JT, Ho KC (2009) Enhancing the Performance of Dye-sensitized Solar Cells based on an Organic Dye by Incorporating TiO2 Nanotube in a TiO2 Nanoparticle Film. Electrochim. Acta. 54: 4123.10.1016/j.electacta.2009.02.052 ↗
23. Wang TT, Raghunath P, Lu YF, Liu YC, Chiou CH, Lin MC (2011) Observation of Significant enhancement in the efficiency of a DSSC by InN nanoparticles over TiO2-nanoparticle films. Chemical Physics Letters 510: 126–130.10.1016/j.cplett.2011.05.020 ↗
24. Wen P, Han Y, Zhao W (2012) Influence of TiO2Nanocrystals Fabricating Dye-Sensitized Solar Cell on the Absorption Spectra of N719 Sensitizer. International Journal of Photoenergy 2012: 7.10.1155/2012/906198 ↗
25. Chang H, Hsieh TJ, Chen TL, Huang KD, Jwo CS, Chien SH (2009) Dye-Sensitized Solar Cells Made with TiO2-Coated Multi-Wall Carbon Nanotubes and Natural Dyes Extracted from Ipomoea. Materials Transactions 50: 2879-2884.10.2320/matertrans.m2009203 ↗
26. Fabregat-Santiago F, Bisquert J, Garcia-Belmonte G, Boschloo G, Hagfeldt A (2005) Influence of electrolyte in transport and recombination in dye-sensitized solar cells studied by impedance spectroscopy. Sol. Energy Mater. Sol. Cells. 87: 117–131.10.1016/j.solmat.2004.07.017 ↗
27. Zen S, Teramoto Y, Ono R, Oda T (2012) Development of low-temperature sintering technique fordye-sensitized solar cells combined with dielectric barrier discharge treatment. Jpn. J. Appl. Phys 51: 056201.10.7567/jjap.51.056201 ↗
28. Winantyo R, Zulfia A, Poespawati NR, Hartanto D (2011) Effect of Annealing on Characterization of TiO2-Based DSSC. Journal of Materials Science and Engineering A 2 2: 232-237.