journal article·2024-07

Electrochemical properties of B-site non-stoichiometric layered perovskite SmBa0.5Sr0.5CoxO5+d (x=1.9–2.1) cathodes for IT-SOFC

Ji Min Im, Harald Schlegl, Jun-Young Park, Seung-Wook Baek, Jung Hyun Kim

Ceramics International· Volume 50· Issue 13
Publisher page

Abstract

In this study, layered perovskites were synthesized using a non-stoichiometric synthesis strategy that allowed the variation of the amount of Co substitution in the basic composition of SmBa0.5Sr0.5Co2O5+d (SBSCO), used as a cathode material for Intermediate Temperature-operating Solid Oxide Fuel Cells (IT-SOFCs). SmBa0.5Sr0.5CoxO5+d (x = 1.9–2.1, SBSCO-1.9–2.1), B-site non-stoichiometric layered perovskites, were analyzed to characterize the electrical and electrochemical properties with respect to the Co substitution. Among them, SmBa0.5Sr0.5Co2.05O5+d (SBSCO-2.05) exhibited the best electrical and electrochemical properties with an ASR of 0.082 Ωcm2 and an electrical conductivity of 268.42 S/cm at 700 °C (measured in air within a series of measurements of increasing measuring temperature). Therefore, B-site non-stoichiometric perovskite compositions with increased Co substitution on their B sites represent a key strategy for achieving high performance cathodes compared to cathodes with stoichiometric compositions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Magnetic and transport properties of perovskites and related materials · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Nanomaterials for solid oxide fuel cells: a review10.1016/j.rser.2017.09.046 ↗
2. Net-zero emissions energy systems
3. Exploiting rare-earth-abundant layered perovskite cathodes of LnBa0.5Sr0.5Co1.5Fe0.5O5+δ (Ln=La and Nd) for SOFCs10.1016/j.ijhydene.2020.11.031 ↗
4. Overview on ceramic and nanostructured materials for solid oxide fuel cells (Sofcs) working at different temperatures10.33961/jecst.2019.00612 ↗
5. World energy resources and new Technologies10.1515/igbp-2016-0003 ↗
6. A brief review of conductivity and thermal expansion of perovskite-related oxides for SOFC cathode10.29317/ejpfm.2018020309 ↗
7. Recent advances on electrolyte materials for SOFC: a review10.1016/j.inoche.2023.110724 ↗
8. Thermal stability of portable microtubular SOFCs and stacks10.1149/1.2953590 ↗
9. Progress in material development for low-temperature solid oxide fuel cells: a review10.3390/en14051280 ↗
10. A-site calcium-doped Pr1-xCaxBaCo2O5+δ double perovskites as cathodes for intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2016.02.071 ↗
11. Intermediate temperature solid oxide fuel cells10.1039/b612060c ↗
12. Materials and concepts for solid oxide fuel cells (SOFCs) in stationary and mobile applications10.1016/j.jpowsour.2003.09.024 ↗
13. Recent advances in perovskite-type materials for solid oxide fuel cell cathodes10.1016/S1466-6049(01)00004-6 ↗
14. Electrochemical behaviors for Ag, LSCF and BSCF as oxygen electrodes for proton conducting IT-SOFC10.1149/2.0121710jes ↗
15. Investigation of layered perovskite type NdBa1-xSrxCo2O5+δ (x = 0, 0.25, 0.5, 0.75, and 1.0) cathodes for intermediate-temperature solid oxide fuel cells10.1016/j.electacta.2013.03.041 ↗
16. Intermediate-temperature electrochemical performance of a polycrystalline PrBaCo2O5+δ cathode on samarium-doped ceria electrolyte10.1016/j.jpowsour.2008.11.045 ↗
17. Rapid oxygen ion diffusion and surface exchange kinetics in PrBaCo2O5+x with a perovskite related structure and ordered a cations10.1039/b618345j ↗
18. Pr- and Sm-substituted layered perovskite oxide systems for IT-SOFC cathodes10.3390/en14206739 ↗
19. Structure and properties of layered-perovskite LaBa1-xCo2O5+δ (x = 0-0.15) as intermediate-temperature cathode material10.1016/j.jpowsour.2013.04.005 ↗
20. Structural, thermal and electrochemical properties of layered perovskite SmBaCo2O5+d, a potential cathode material for intermediate-temperature solid oxide fuel cells10.1016/j.jpowsour.2009.06.024 ↗
21. Electrochemical investigation of composite cathodes with SmBa0.5Sr0.5Co2O5-δ cathodes for intermediate temperature-operating solid oxide fuel cell10.1021/cm901720w ↗
22. New chemical systems for solid oxide fuel cells10.1021/cm902687z ↗
23. Cobalt-free perovskite cathodes for solid oxide fuel cells10.1002/celc.201900391 ↗
24. Structural and electrochemical characterization of YBa(Fe,Co,Cu)2O5+δ layered perovskites as cathode materials for solid oxide fuel cells10.1016/j.ijhydene.2021.01.141 ↗
25. Electrical characterization of co-precipitated LaBaCo2O5+δ and YBaCo2O5+δ oxides10.1016/j.jeurceramsoc.2014.07.005 ↗
26. Electrochemical performances of LaBaCuFeO5+x and LaBaCuCoO5+x as potential cathode materials for intermediate-temperature solid oxide fuel cells10.1016/j.elecom.2008.10.035 ↗
27. Cobalt based layered perovskites as cathode material for intermediate temperature Solid Oxide Fuel Cells: a brief review10.1016/j.jpowsour.2015.08.034 ↗
28. Generation of nanoflowers and nanoneedles on Co-based layered perovskite of IT-SOFC cathode affecting electrical conductivities10.1016/j.ijhydene.2023.05.327 ↗
29. Advanced electrochemical properties of LnBa0.5Sr0.5Co2O5+δ (Ln=Pr, Sm, and Gd) as cathode materials for IT-SOFC10.1149/1.3110989 ↗
30. Oxygen nonstoichiometry, thermal expansion and high-temperature electrical properties of layered NdBaCo2O5+δ and SmBaCo2O5+δ10.1016/j.materresbull.2010.05.004 ↗
31. Study of the oxygen desorption from GdBa1-xSrxCo2O5+δ (x = 0, 0.25, 0.5 and 1): effect of the Sr-content on the oxidation state of cobalt ions10.1016/j.jallcom.2014.04.021 ↗
32. Electrical properties of thin bilayered YSZ/GDC SOFC electrolyte elaborated by sputtering10.1016/j.jpowsour.2005.08.017 ↗
33. Preparation of YSZ/YDC and YSZ/GDC composite electrolytes by the tape casting and sol-gel dip-drawing coating method for low-temperature SOFC10.1023/A:1015451910081 ↗
34. High power density thin film SOFCs with YSZ/GDC bilayer electrolyte10.1016/j.electacta.2011.03.039 ↗
35. Solid oxide fuel cell: materials for anode, cathode and electrolyte10.1016/j.ijhydene.2019.11.234 ↗
36. Formation of novel bimetal oxide In2V2O7through a shock compression method10.1021/acsomega.2c03220 ↗
37. XPS studies of solvated metal atom dispersed catalysts. Evidence for layered cobalt—manganese particles on alumina and silica10.1021/ja00003a019 ↗
38. A comparative study of SrCo0.8Nb0.2O3−δ and SrCo0.8Ta0.2O3−δ as low-temperature solid oxide fuel cell cathodes: effect of non-geometry factors on the oxygen reduction reaction10.1039/C5TA07178J ↗
39. Electrical, thermal and electrochemical properties of SmBa1-xSrxCo2O5+δ cathode materials for intermediate-temperature solid oxide fuel cells10.1016/j.electacta.2016.04.069 ↗
40. X-ray photoelectron spectroscopy of Sm-doped layered perovskite for intermediate temperature-operating solid oxide fuel cell10.1016/j.apsusc.2013.10.107 ↗
41. Oxidation of carbon monoxide on LaMn1-XCuxO3 perovskite-type mixed oxides10.1039/FT9949001183 ↗
42. Characterization of layered perovskite oxides NdBa1-xSr xCo2O5+δ (x = 0 and 0.5) as cathode materials for IT-SOFC10.1016/j.ijhydene.2011.12.150 ↗
43. Layered LnBaCo2O5+δ perovskite cathodes for solid oxide fuel cells: an overview and perspective10.1039/C5TA06212H ↗
44. Co-deficient PrBaCo2−xO6−δ perovskites as cathode materials for intermediate-temperature solid oxide fuel cells: enhanced electrochemical performance and oxygen reduction kinetics10.1016/j.ijhydene.2018.01.018 ↗
45. Electrical conductivity and defect models of MgO‐doped Cr2O310.1111/j.1151-2916.1988.tb05024.x ↗
46. Electrical conductivity properties of porous SmBaCo2O5+d and SmBa0.5Sr0.5Co2O5+d layered perovskite oxide systems for solid oxide fuel cell10.1016/j.ceramint.2022.06.179 ↗
47. Influence of microstructure and applied current on the electrical conductivity of SmBaCo2O5+d cathode in solid oxide fuel cell10.1016/j.ijhydene.2022.03.056 ↗
48. Electrical conductivity characteristics of Sr substituted layered perovskite cathode (SmBa0.5Sr0.5Co2O5+d) for intermediate temperature-operating solid oxide fuel cell10.1016/j.ceramint.2022.02.114 ↗
49. Electrochemical characteristic of non-stoichiometric SmBa0.45Sr0.5Co2O5+d layered perovskite oxide system for IT-SOFC cathode10.1016/j.ijhydene.2023.01.255 ↗
50. A new family of Mo-doped SrCoO 3−d10.1021/cm300255r ↗
51. High-temperature thermoelectric characterization of filled strontium barium niobates: power factors and carrier concentrations10.1557/jmr.2017.18 ↗