journal article·2020-03

(Ba,Sr)TiO3 solid solutions sintered from sol-gel derived powders: An insight into the composition and temperature dependent dielectric behavior

Roxana Elena Patru, Constantin Paul Ganea, Catalina-Andreea Stanciu, Vasile-Adrian Surdu, Roxana Trusca, Adelina-Carmen Ianculescu, Ioana Pintilie, Lucian Pintilie

Ceramics International· Volume 46· Issue 4
Publisher page

Abstract

Abstract Single-phase Ba1-xSrxTiO3 (BST) perovskite ceramics with 0.3 ≤ x ≤ 0.4 were prepared from powders synthesized via sol-gel route. The compositions have the ferroelectric-paraelectric phase transition close to room temperature. At 20 °C the BST ceramics are ferroelectric for 0.3 ≤ x ≤ 0.35 and paraelectric for x = 0.375 and x = 0.40. The study follows the relation between the structural changes produced when increasing the Sr content and the dielectric properties at low intensity electric fields. It is found that the grain size and tetragonality decreases as the Sr content increases. Analyses of complex permittivity and impedance spectroscopy reveal the temperature and frequency dependencies of the dielectric properties. The phase transitions seem to be of first order for all compositions, with a thermal hysteresis that decreases with increasing the Sr content, fact attributed to the corresponding increase of the grain boundaries weight allowing a more efficient stress relaxation in the structure during the change of the symmetry from cubic to tetragonal. The diffusiveness degree during the phase transition is increasing with Sr content, suggesting some relaxor-type contribution attributed to smaller grain size. The ac conductivity follows the universal Jonscher law, with an ac component having the power parameter s independent of Sr content, and a dc component that it is thermally activated with an activation energy of about 0.7–0.77 eV attributed to oxygen vacancies acting as donor-like defects. The fit of impedance spectra at different temperatures and frequencies is obtained by using an equivalent circuit accounting the grains, grain boundaries, electrode interfaces and the local contributions produced by reorientation of defect dipoles or defect clusters. All the component circuits have significant variations around phase transitions. These are discussed in relation to structural changes occurring during transition and considering the changes in the distribution of various charges when polarization vanishes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric properties of ceramics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Ferroelectric thin films: review of materials, properties, and applications
2. Giant electroresistance in ferroelectric tunnel junctions10.1103/PhysRevLett.94.246802 ↗
3. Application of the ferroelectric materials to ULSI memories10.1016/S0169-4332(96)00963-4 ↗
4. Composition-control of magnetron-sputter-deposited (BaxSr1−x)Ti1+yO3+z thin films for voltage tunable devices10.1063/1.125839 ↗
5. Dielectric properties in heteroepitaxial Ba0.6Sr0.4TiO3 thin films: effect of internal stresses and dislocation-type defects10.1063/1.1308531 ↗
6. Ferroelectric, dielectric and piezoelectric properties of ferroelectric thin films and ceramics10.1088/0034-4885/61/9/002 ↗
7. Revisiting the phase transitions in BaxSr1-xTiO3 at low doping range (x≤0.1)10.1016/j.jallcom.2018.03.185 ↗
8. Dielectric and ferroelectric properties of BST ceramics obtained by a hydrothermally assisted complex polymerization method10.1016/j.ceramint.2015.05.088 ↗
9. High dielectric constant ceramics10.1021/ie50443a009 ↗
10. Microstructure and dielectric properties of BST ceramics derived from high-energy ball-milling10.1016/j.jallcom.2013.09.031 ↗
11. Nonlinear dielectric properties of Ba1−xSrxTiO3 ceramics
12. Influence of stoichiometry on the dielectric and ferroelectric properties of the tunable (Ba,Sr)TiO3 ceramics investigated by First Order Reversal Curves method10.1016/j.jeurceramsoc.2006.02.025 ↗
13. A new understanding of the dielectric relaxation of solids10.1007/BF00542364 ↗
14. Intrinsic pyroelectric properties of thick, coarse grained Ba1−xSrxTiO3 ceramics10.1016/j.ceramint.2016.03.152 ↗
15. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
16. Dielectric properties of fine-grained barium titanate ceramics10.1063/1.336051 ↗
17. Twinning in ferroelectric and ferroelastic ceramics: stress relief10.1007/BF00584864 ↗
18. Grain-size-dependent spontaneous relaxor-to-ferroelectric phase transition in (Bi1/2K1/2)TiO3 ceramics10.1063/1.4926496 ↗
19. Preparation and dielectric properties of BaZr0.1Ti0.9O3 ceramics with different grain sizes10.1080/01411590600892120 ↗
20. High performance room temperature ferroelectric barium strontium titanate ceramics by spark-plasma-sintering ultrafine nanocrystals10.1016/j.ceramint.2019.05.057 ↗
21. Investigation of grain-size influence on the ferroelectric-to-paraelectric phase transition in BaTiO3 ceramics by means of AC calorimetry10.1143/JJAP.37.1950 ↗
22. Landau theory-based analysis of grain-size dependence of ferroelectric-to-paraelectric phase transition and its thermal hysteresis in barium titanate ceramics10.1088/0953-8984/11/6/024 ↗
23. Features of diffuse phase transition in lead barium niobate ferroelectric ceramics10.1063/1.1530366 ↗
24. Synthesis and analysis of electron density distribution in Ba1-xSrxTiO3 ceramics10.1007/s10854-015-4053-5 ↗
25. Dielectric relaxation in solids10.1088/0022-3727/32/14/201 ↗
26. The ‘universal’ dielectric response10.1038/267673a0 ↗
27. Ionic conductivity in oxide heterostructures: the role of interfaces10.1088/1468-6996/11/5/054503 ↗
28. Impedance spectroscopy and thermally simulated depolarization current study of barium strontium titanate glass ceramics: effect of thermal annealing atmosphere on dielectric property10.1016/j.ceramint.2017.12.218 ↗
29. The interpretation of non‐ideal dielectric admittance and impedance diagrams10.1002/pssa.2210320241 ↗
30. Analysis of the alternating current properties of ionic conductors10.1007/BF00541805 ↗
31. Semiconducting barium titanate10.1007/BF00550094 ↗
32. Visualization of grain boundary as blocking layer for oxygen tracer diffusion and a proposed defect model in non doped BaTiO3 ceramics
33. Interfacial defects controlled electrical and magnetotransport in Co/ZnO nanocomposites10.1063/1.3077312 ↗
34. Perovskite (La,Sr)MnO3 with tunable electrical properties by the Sr-doping effect10.1016/j.jallcom.2014.12.137 ↗
35. Coexistence of trapped and free excess electrons in SrTiO310.1103/PhysRevB.91.085204 ↗
36. Oxygen-vacancy-related low-frequency dielectric relaxation and electrical conduction in Bi:SrTiO310.1103/PhysRevB.62.228 ↗
37. Effect of Co-substitution on the vibrational, magnetic, and dielectric properties of copper ferrites obtained by microwave-assisted hydrothermal method10.1007/s11664-018-6598-6 ↗
38. Electrical, dielectric properties and study of AC electrical conduction mechanism of Li0.9□0.1NiV0.5P0.5O410.1098/rsos.171472 ↗
39. Electrical conduction mechanism and dielectric properties of spherical shaped Fe3O4 nanoparticles synthesized by Co-precipitation method10.3390/ma11050735 ↗
40. Anomalous conductivity prefactors in fast ion conductors10.1038/306456a0 ↗
41. Barsoukov · 200510.1002/0471716243 ↗
42. Dipolar relaxation and impedance of an yttria stabilised zirconia ceramic electrolyte10.1039/C5TA08990E ↗
43. A positive-temperature-coefficient electrode with thermal cut-off mechanism for use in rechargeable lithium batteries10.1016/j.elecom.2004.07.021 ↗
44. Positive temperature coefficient of resistivity for BaTiO3-based materials10.1016/0272-8842(91)90017-T ↗