Influence of citrate/nitrate ratio on the preparation of Li0.5La0.5TiO3 nanopowder by combustion method
Source abstract
Abstract
Abstract Preparation of nano-crystalline Li0.5La0.5TiO3 perovskite material using citrate–nitrate redox reaction by the combustion technique is reported. The role of the ammonium nitrate concentration used to co-precipitate the Li0.5La0.5Ti-citrate precursor is revealed by ATD/TG, XRD, SEM-EDX and HRTEM techniques. Thermo-gravimetric analysis data show how the intensity of the exothermic peak associated with the citrate–nitrate redox reaction decreases until disappearance as the citrate/nitrate molar ratio increases. The XRD study indicates that a single-phase cubic Li0.5La0.5TiO3 phase is formed at 350 °C when the citrate/nitrate ratio varies between 0.13 and 0.17. The formed Li0.5La0.5TiO3 powders show an average particle size of 15–20 nm. Electrochemical impedance spectroscopy technique reveals a relative high ionic conductivity inside the grain for the nanometric Li0.5La0.5TiO3 material, with values of around 10−4 S/cm at room temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Lithium batteries: status, prospects and future10.1016/j.jpowsour.2009.11.048 ↗
3. Nanomaterials for rechargeable lithium batteries10.1002/anie.200702505 ↗
4. Size-dependent lithium miscibility gap in nanoscale Li1−xFePO410.1149/1.2710960 ↗
5. Lithium lanthanum titanates: a review10.1021/cm0300516 ↗
6. Ceramic and polymeric solid electrolytes for lithium-ion batteries10.1016/j.jpowsour.2010.01.076 ↗
7. Preparation of La0.5Li0.5TiO3 perovskite thin films by the sol–gel method10.1023/A:1018566620564 ↗
8. Lithium lanthanum titanate ceramic as sensitive material for pH sensor: influence of synthesis methods and powder grains size10.1016/j.jeurceramsoc.2005.03.172 ↗
9. M.P. Pechini, Method of Preparing Lead and Alkaline Titanates and Niobiates and Coating Method Using the Same to Form a Capacitor, USA, 1967, p. 697.
10. Synthesis of fine powders of Li3xLa2/3−xTiO3 perovskite by a polymerizable precursor method10.1021/cm049869x ↗
11. Synthesis and characterization of nanostructured fast ionic conductor Li0.30La0.56TiO310.1021/cm060605f ↗
12. Synthesis of magnesium–aluminium spinel from autoignition of citrate–nitrate gel10.1016/j.matlet.2003.10.004 ↗
13. The aqueous solution-gel synthesis of perovskite Pb(Zr1−xTix)O3 (PZT)10.1007/s10853-006-1154-9 ↗
14. Nanocrystalline thoria powders via glycine–nitrate combustion10.1016/S0022-3115(00)00717-0 ↗
15. Chemical synthesis of PZT powder by auto-combustion of citrate–nitrate gel10.1016/S0167-577X(96)00191-7 ↗
16. Ni–YSZ cermet anodes prepared by citrate/nitrate combustion synthesis10.1016/S0378-7753(01)01056-4 ↗
17. A new approach to thermochemical calculations of condensed fuel–oxidizer mixtures10.1016/0010-2180(81)90111-5 ↗
18. Influence of citrate–nitrate reaction mixture packing on ceramic powder properties10.1016/S0378-7753(99)00406-1 ↗
19. Propellant chemistry10.2533/000942904777677713 ↗
20. Effect of citric acid on the synthesis of nano-crystalline yttria stabilized zirconia powders by nitrate–citrate process10.1016/j.ceramint.2006.05.021 ↗
21. Li3xLa2/3−xTiO3 nanoparticles obtained from a low temperature synthesis route10.4028/www.scientific.net/JNanoR.14.107 ↗
22. Infrared spectra and crystalline phase transitions of ammonium nitrate10.1139/v64-009 ↗
23. Lithium–cobalt citrate precursors in the preparation of intercalation electrode materials10.1021/cm960009t ↗
24. On the chemical nature of lanthanum–titanium citric complexes, precursors of La2Ti2O710.1016/j.matlet.2004.06.051 ↗
25. A new dinuclear Ti(IV)–peroxo–citrate complex from aqueous solutions. synthetic, structural, and spectroscopic studies in relevance to aqueous titanium(IV)–peroxo–citrate speciation10.1021/ic0343051 ↗
26. The peroxo complexes of titanium10.1021/ic50093a001 ↗
27. An aqueous solution gel citratoperoxo Ti(IV) precursor: synthesis, gelation, thermo oxidative decomposition and oxide crystallization10.1007/s10971-007-1601-3 ↗
28. Application of water soluble titanium complexes as precursors for synthesis of titanium containing oxides via aqueous solution processes10.1246/bcsj.20100103 ↗
29. Preparation of an Li0.7Ni0.8Co0.2O2 electrode material from a new Li–Co–Ni mixed-citrate precursor10.1002/ejic.200400383 ↗
30. Entirely aqueous solution−gel route for the preparation of (Pb1−xCax)TiO3 thin films10.1021/cm061767e ↗
31. Thermal decomposition of lanthanum–titanium citric complexes prepared from ethylene glycol medium10.1023/A:1019600815906 ↗
32. Ammonium nitrate: thermal stability and explosivity modifier10.1016/S0040-6031(01)00775-4 ↗
33. Ammonium nitrate: a promising rocket propellant oxidizer10.1016/S0304-3894(99)00039-4 ↗
34. Determination of water, ammonium nitrate and sodium nitrate content in ‘water-in-oil’ emulsions using TG and DSC10.1007/s10973-006-7609-z ↗
35. Preparation of nanoparticles of oxides by the citrate–nitrate process. Effect of metal ions on the thermal decomposition characteristics10.1007/s10973-011-1525-6 ↗
36. Chemistry of Nanocrystalline Oxide Materials: Combustion Synthesis10.1142/6754 ↗
37. J. Akhavan, The Chemistry of Explosives, in: R.S.o. Chemistry (Ed.), 2004.10.1039/9781847552020 ↗
38. Ionic conductivity, lithium insertion and extraction of lanthanum lithium titanate10.1016/S0167-2738(01)00884-0 ↗
39. Evegenij Barsoukov, in: Evegenij Barsoukov, J. Ross Macdonald (Eds.), Impedance Spectroscopy: Theory, Experiment and Applications, second edition, John Wiley & Sons, Inc., New Jersey, 2005.10.1002/0471716243 ↗
40. Dependence of the lithium ionic conductivity on the B-site ion substitution in (Li0.5 La0.5)Ti1−xMxO3 (M=Sn, Zr, Mn, Ge)10.1016/S0167-2738(97)00525-0 ↗