Effects of La doping on electrical conductivity, thermal expansion and electrochemical performance in La x Sr 1–x Co 0.9 Sb 0.1 O 3–δ cathodes for IT–SOFCs
Source abstract
Abstract
Abstract Perovskite oxides La x Sr 1–x Co 0.9 Sb 0.1 O 3– δ (LSCSbx, x=0.0–0.8) are investigated as IT–SOFC cathodes supported with La 0.9 Sr 0.1 Ga 0.8 Mg 0.2 O 3– δ (LSGM) electrolyte. All LSCSbx oxides have a tetragonal distorted perovskite structure with s.g. P4/mmm , while a La 2 Co 2 O 5 impurity phase was observed within La doping levels at x=0.6–0.8. The LSCSb0.4 has a good chemical compatibility with LSGM electrolyte for temperatures up to 1050 °C. XPS examinations indicate the existence of Co 3+ /Co 4+ mixed valence states in LSCSbx. The conductivity increases with La doping and the LSCSbx with x=0.4 exhibits the highest electrical conductivity (e.g., 673–1637 S cm −1 at 300–850 °C). The thermal expansion coefficient (TEC) decreases from 25.89×10 –6 K –1 for x=0.0 to 18.5×10 –6 K –1 for x=0.6 at 30–900 °C. Among the LSCSbx compositions, the LSCSb0.2 exhibits the lowest polarization resistance ( R p ), which is merely 0.069 Ω cm 2 at 700 °C. The maximum power density of the cell with LSCSb0.2 cathode on 300 µm thick LSGM electrolyte attains 564 mW cm –2 at 850 °C, which is higher than that of SrCo 0.9 Sb 0.1 O 3– δ (SCSb) cathode. All of the results indicate that LSCSb0.2 is a promising material for application in IT–SOFCs cathodes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Magnetic and transport properties of perovskites and related materials · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Ceramic fuel cells10.1111/j.1151-2916.1993.tb03645.x ↗
2. A novel cobalt–free Ba0.5Sr0.5Fe0.9Mo0.1O3–δ–BaZr0.1Ce0.7Y0.2O3−α composite cathode for solid oxide fuel cells10.1016/j.jpowsour.2012.01.044 ↗
3. A high–performance cathode for the next generation of solid–oxide fuel cells10.1038/nature02863 ↗
4. 2003 · 5 · 55
5. Synthesis and properties of SmBaCo2–xNixO5+δ perovskite oxide for IT–SOFC cathodes10.1016/j.ceramint.2015.09.062 ↗
6. Synthesis and characterization of PrBa0.5Sr0.5Co2–xNixO5+δ (x=0.1, 0.2 and 0.3) cathodes for intermediate temperature SOFCs10.1016/j.ceramint.2014.07.144 ↗
7. Electrical properties of (La0.9Ca0.1)(Co1–xNix)O3−δ cathode materials for SOFCs10.1016/j.ceramint.2011.09.065 ↗
8. Novel SrCo1−yNbyO3−δ cathodes for intermediate–temperature solid oxide fuel cells10.1016/j.jpowsour.2009.12.081 ↗
9. SrCo0.9Sb0.1O3−δ cubic perovskite as a novel cathode for intermediate–to–low temperature solid oxide fuel cells10.1016/j.jallcom.2008.05.056 ↗
10. Structural, electrical and electrochemical characterizations of SrNb0.1Co0.9O3−δ as a cathode of solid oxide fuel cells operating below 600 °C10.1016/j.ijhydene.2009.11.092 ↗
11. SrCo1−xSbxO3−δ perovskite oxides as cathode materials in solid oxide fuel cells10.1016/j.jpowsour.2008.12.138 ↗
12. Crystal Structure and Metal–Insulator Transition of La1−xSrxCoO310.1006/jssc.1996.0058 ↗
13. Relationship between cation substitution and stability of perovskite structure in SrCoO3–δ-based mixed conductors10.1016/j.ssi.2006.10.022 ↗
14. Structural and electrical characterization of the novel SrCo0.9Sb0.1O3–δ perovskite: evaluation as a solid oxide fuel cell cathode material10.1021/cm071837x ↗
15. Revised effective ionic radii in halides and chalcogenides10.1107/S0567739476001551 ↗
16. Thermal expansion of La1−xSrxCrO3−δ10.1016/S0167-2738(01)00986-9 ↗
17. Synthesis and characterization of IT–electrolyte with perovskite structure La0.8Sr0.2Ga0.85Mg0.15O3–δ by glycine–nitrate combustion method10.1016/S0925-8388(02)00859-9 ↗
18. A method of measuring specific resistivity and hall effect of discs of arbitrary shape
19. Crystal Structure and Magnetic Properties of La2Co2O510.1006/jssc.1998.7963 ↗
20. A. Levasseur, XPS analysis of new lithium cobalt oxide thin–films before and after lithium deintercalation10.1016/S0040-6090(00)01802-2 ↗
21. Lithium–nickel cobalt oxides with spinel structure prepared at low temperature. XRD, XPS, and EIS measurements10.1016/j.matlet.2011.11.108 ↗
22. X–ray photoelectron spectra of 3d transition metal pyrites10.1016/0022-4596(80)90543-5 ↗
23. Relationship between transport properties and phase transformations in mixed–conducting oxides10.1016/j.jssc.2005.10.027 ↗
24. Electrochemical properties of mixed conducting perovskites La1−xMxCo1−yFeyO3−δ (M=Sr, Ba, Ca)10.1149/1.1837098 ↗
25. Thermal and electrical properties of new cathode material Ba0.5Sr0.5Co0.8Fe0.2O3–δ for solid oxide fuel cells10.1149/1.1951232 ↗
26. Electrical conductivity, thermal expansion and electrochemical performances of Ba–doped SrCo0.9Nb0.1O3–δ cathodes for IT–SOFCs10.1016/j.ijhydene.2013.04.107 ↗
27. Oxygen vacancy ordering in superlattices of the two novel oxides, La2Ni2O5 and La2Co2O5, prepared by low temperature reduction of the parent perovskites10.1039/c39850000007 ↗
28. Interaction between the d–shells in the transition metals II. Ferromagnetic compounds of manganese with perovskite structure10.1103/PhysRev.82.403 ↗
29. Electrical Conductivity and Seebeck Coefficient of Nonstoichiometric Lal-xSrxCoO3-δ10.1149/1.2097187 ↗
30. High–temperature thermal expansion and conductivity of cobaltites: potentials for adaptation of the thermal expansion to the demands for solid oxide fuel cells10.1016/j.mseb.2003.11.018 ↗
31. Thermal, mechanical and phase stability of LaCoO3 in reducing and oxidizing environments10.1016/j.jpowsour.2008.05.063 ↗
32. Oxygen transport properties of La2Ni1−xCuxO4+δ mixed conducting oxides10.1016/S1293-2558(03)00091-8 ↗
33. Thermal, electrical and electrochemical characteristics of Ba1–xSrxCo0.8Fe0.2O3–δ cathode material for intermediate temperature solid oxide fuel cells10.1016/j.ijhydene.2011.06.021 ↗
34. Magnetic and transport properties of the system La1–xSrxCoO3–δ (0<x≤0.50)10.1006/jssc.1995.1351 ↗
35. Synthesis, characterization and evaluation of PrBaCo2−xFexO5+δ as cathodes for intermediate–temperature solid oxide fuel cells10.1016/j.ijhydene.2010.12.064 ↗
36. Characteristics of ABO3 and A2BO4 (A= Sm, Sr; B= Co, Fe, Ni) samarium oxide system as cathode materials for intermediate temperature–operating solid oxide fuel cell10.1016/j.ssi.2007.12.010 ↗
37. Evaluation of a–site cation–deficient (Ba0.5Sr0.5)1–xCo0.8Fe0.2O3–δ (x>0) perovskite as a solid–oxide fuel cell cathode10.1016/j.jpowsour.2008.04.012 ↗
38. Novel layered perovskite SmBaCu2O5+δ as a potential cathode for intermediate temperature solid oxide fuel cells10.1016/j.ijhydene.2011.09.035 ↗
39. Intermediate–temperature electrochemical performance of a polycrystalline PrBaCo2O5+δ cathode on samarium–doped ceria electrolyte10.1016/j.jpowsour.2008.11.045 ↗
40. Effects of Pr–deficiency on thermal expansion and electrochemical properties in Pr1−xBaCo2O5+δcathodes for IT–SOFCs10.1016/j.electacta.2016.07.014 ↗
41. La0.9–xCaxCe0.1CrO3–δ as potential anode materials for solid oxide fuel cells10.1016/j.ijhydene.2012.04.112 ↗
42. SmBaCo2O5+x double–perovskite structure cathode material for intermediate–temperature solid–oxide fuel cells10.1016/j.jpowsour.2008.07.064 ↗