journal article·2010-09Open access

Structure and properties of plasma sprayed BaTiO3 coatings

Pavel Ctibor, Helene Ageorges, Josef Sedlacek, Radim Ctvrtlik

Ceramics International· Volume 36· Issue 7

Abstract

Plasma spraying enables to create layers with thickness in a millimeter range adhering on various substrates. This paper provides a study of electric and mechanical properties of BaTiO3 coatings prepared by atmospheric plasma spraying. The spraying was carried out by a direct current gas-stabilized plasma gun. BaTiO3 was fed into the plasma jet as a feedstock powder prepared by a reactive sintering of micrometer-sized powders of BaCO3 and TiO2. Microstructure and phase composition are reported and discussed in connection with electric and mechanical properties. The ability of the used techniques to detect precisely the phase transformation temperatures of BaTiO3 plasma sprayed coatings is discussed as well. A depth-sensing indentation measurement was done between 290 and 520 K to provide local mechanical characterization. The elastic modulus has shown slightly higher values than that reported typically in papers focused on BaTiO3 ferroelectric thin films. The average Vickers microhardness is tested to characterize the samples in larger scale. Awear resistance in a slurry environment is reported as well. Dielectric properties are reported for the temperature window of existence of the tetragonal ferroelectric phase. Relative permittivity and loss factor are studied at frequency from 50 Hz to 1 MHz and temperature from 260 to 400 K.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Effect of ferroelectric polarization on the adsorption and reaction of ethanol on BaTiO310.1016/j.susc.2008.07.011 ↗
2. Electroceramic materials10.1016/S1359-6454(99)00293-1 ↗
3. An interfacial defect layer observed at (Ba,Sr)TiO3-Pt interface10.1016/S0040-6090(02)01330-5 ↗
4. The influence of Nb2O5 on BaTiO3 ceramics dielectric properties10.1016/S0955-2219(01)00347-8 ↗
5. Modeling of electroceramics – applications and prospects10.1016/S0955-2219(98)00293-3 ↗
6. Preparation and characterization of Ag-doped BaTiO3 based X7R ceramics10.1016/j.materresbull.2008.08.015 ↗
7. Re-investigation of synthesis of BaTiO3 by conventional solid-state reaction and oxalate coprecipitation route for piezoelectric applications10.1016/j.ceramint.2005.07.019 ↗
8. Dielectric properties of barium titanate ceramics with different materials powder size10.1016/j.ceramint.2008.04.030 ↗
9. Dielectric relaxation in calcium titanate-containing ceramics prepared by plasma spraying10.1016/S0272-8842(03)00052-X ↗
10. High velocity oxy-fuel and plasma deposition of BaTiO3 and (Ba,Sr)TiO310.1016/S0921-5107(01)00653-5 ↗
11. Buchanan · 2004
12. T.A. Asare, Investigating Ferroelastic and Piezoelectric Vibration Damping Behavior in Nickel-Barium Titanate and Nickel-PZT Composites, Diss. FVPI, Faculty of the Virginia Polytechnic Institute, Blacksburg, Virginia, 2007.
13. Anisotropic microhardness in single-crystal and polycrystalline BaTiO310.1023/A:1004329526403 ↗
14. Microstructure evolution and dielectric properties of plasma sprayed BaTiO3 coatings
15. NanoTest™ NT600 – a device for analyses of mechanical properties of materials
16. Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
17. Dielectric investigations on ‘MgAlON’ compounds: role of nitrogen content10.1016/S0955-2219(02)00195-4 ↗
18. Plasma spraying and characterization of tungsten carbide–cobalt coatings by the water-stabilized system WSP®
19. Structure dynamics of strongly reduced epitaxial BaTiO3−x studied by Raman scattering10.1016/j.jeurceramsoc.2005.03.055 ↗
20. Mechanical properties of BaTiO3 open-porosity flaks10.1016/j.jeurceramsoc.2008.12.018 ↗
21. Mechanical loss and Young's modulus associated with phase transitions in barium titanate based ceramics10.1007/BF00355886 ↗
22. Dielectric nonlinear properties of BaTiO3–CaTiO3–SrTiO3 ceramics near the solubility limit10.1016/j.matchemphys.2008.06.020 ↗
23. H atom in BaTiO3 and CaTiO3 crystals: structure, electronic properties, and diffusion
24. Proton related defects in α-BaTiO3:H films based MIM capacitors10.1016/j.ssi.2009.02.009 ↗
25. Structure and electrical properties of oxygen-deficient hexagonal BaTiO310.1039/a900957d ↗
26. Microstructure and permittivity of sintered BaTiO3: influence of particle surface chemistry in an aqueous medium10.1016/j.materresbull.2003.09.011 ↗
27. Frequency and temperature dependence of dielectric constant of Epoxy/BaTiO3 composite embedded capacitor films (ECFs) for organic substrate
28. Giant permittivity phenomena in layered BaTiO3–Ni composites10.1016/j.jeurceramsoc.2004.12.034 ↗
29. Temperature dependence of electric permittivity of linear dielectrics with ionic and polar covalent bonds10.1016/S0022-3697(98)00049-3 ↗
30. G. Zhan, A.K. Mukerjee, J.D. Kuntz, J. Wan, High density barium titanate of high permittivity, U.S. Patent No. 6,905,649 B2, 2005.
31. Positive temperature coefficient of resistivity in donor-doped BaTiO3 ceramics derived from nanocrystals synthesized at low temperature10.1002/adma.200701804 ↗
32. Effects of grain boundary on dielectric properties in fine-grained BaTiO3 ceramics10.1016/j.mseb.2005.02.054 ↗
33. The microstructure–mechanical properties relationships of BaTiO310.1016/S0272-8842(97)00081-3 ↗