Intermediate-temperature conductivity of B-site doped Na0.5Bi0.5TiO3-based lead-free ferroelectric ceramics
Source abstract
Abstract
Abstract Na 0.5 Bi 0.5 TiO 3 (NBT) based oxide-ion conductor ceramics have great potential applications in intermediate-temperature solid oxide fuel cells (SOFCs) and oxygen sensors. Na 0.5 Bi 0.49 Ti 1−x Mg x O 3−δ ceramics with x=0, 0.01, 0.02, 0.03, 0.05 and 0.08 were prepared by conventional solid-state reaction. XRD measurement and SEM analysis revealed the formation of pure perovskite structures without secondary phase. MgO doping greatly decreased the sintering temperature and inhibited grain growth. AC impedance spectroscopy measurement was adopted to measure the total conductivity, which was found to increase with MgO doping content ranging from 0 to 3 mol% and subsequently to decrease. High oxygen ionic conductivity σ t =0.00629 S/cm was achieved for sample doped with 3 mol% MgO at 600 °C in air atmosphere.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. New ferroelectrics of complex composition
2. Non-180° domain contributions in Bi0.5(Na0.82K0.18)0.5TiO3 lead-free piezoelectric thick films10.1016/j.ceramint.2015.04.142 ↗
3. Perspective on the development of lead-free piezoceramics10.1111/j.1551-2916.2009.03061.x ↗
4. Large strain in relaxor/ferroelectric composite lead-free piezoceramics10.1002/aelm.201500018 ↗
5. Preparation and enhanced electrical properties of grain-oriented (Bi1/2Na1/2)TiO3-based lead-free incipient piezoceramics10.1016/j.jeurceramsoc.2015.03.012 ↗
6. Recent progress in relaxor ferroelectrics with perovskite structure10.1007/s10853-005-5915-7 ↗
7. Impedance spectroscopy of (Bi1/2Na1/2)TiO3–BaTiO3 based high-temperature dielectrics10.1111/jace.13012 ↗
8. A family of oxide ion conductors based on the ferroelectric perovskite Na0.5Bi0.5TiO310.1038/nmat3782 ↗
9. Dramatic influence of A-site nonstoichiometry on the electrical conductivity and conduction mechanisms in the perovskite oxide Na0.5Bi0.5TiO310.1021/cm504475k ↗
10. Doping and defect association in oxides for use in oxygen sensors10.1023/A:1026318712367 ↗
11. Transport properties of solid oxide electrolyte ceramics: a brief review10.1016/j.ssi.2004.06.015 ↗
12. A study of oxygen ion conductivity in doped non-stoichiometric oxides10.1016/0167-2738(82)90045-5 ↗
13. Oxide-ion and proton conducting electrolyte materials for clean energy applications: structural and mechanistic features10.1039/b915141a ↗
14. Structural parameters and oxygen ion conductivity of Y2O3–ZrO2 and MgO–ZrO2 at high temperature10.1016/j.ceramint.2013.05.032 ↗
15. Advanced materials for SOFC application: strategies for the development of highly conductive and stable solid oxide proton electrolytes10.1016/j.pmatsci.2015.08.001 ↗
16. Electrical properties of heterogeneously doped yttria stabilized zirconia10.1016/j.jpowsour.2004.08.016 ↗
17. Physical, chemical and electrochemical properties of pure and doped ceria10.1016/S0167-2738(99)00318-5 ↗
18. Synthesis, structure and conductivity studies of co-doped ceria: CeO2−Sm2O3−Ta2O5 (Nb2O5) solid solution10.1016/j.jpcs.2014.07.019 ↗
19. The evolution of low temperature solid oxide fuel cells10.1557/jmr.2012.194 ↗
20. Effect of oxygen sublattice order on conductivity in highly defective fluorite oxides10.1016/S0955-2219(03)00509-0 ↗
21. Lowering the temperature of solid oxide fuel cells10.1126/science.1204090 ↗
22. Doped LaGaO3 perovskite type oxide as a new oxide ionic conductor10.1021/ja00088a016 ↗
23. Improving oxygen transport in perovskite-type LaGaO3 solid electrolyte through strain10.1021/jp509413w ↗
24. Partial electronic conductivity and electrolytic domain of La0.9Sr0.1Ga0.8Mg0.2O3−δ10.1016/S0167-2738(01)00687-7 ↗
25. A review of doped lanthanum gallates as electrolytes for intermediate temperature solid oxides fuel cells: from materials processing to electrical and thermo-mechanical properties10.1016/j.jeurceramsoc.2015.09.025 ↗
26. A strategy for analysis and modelling of impedance spectroscopy data of electroceramics: doped lanthanum gallate10.1023/B:JECR.0000011215.56084.87 ↗
27. Superior oxygen ion conductivity of lanthanum gallate doped with strontium and magnesium10.1149/1.1836692 ↗
28. Crystal structure, defect chemistry and oxygen ion transport of the ferroelectric perovskite, Na0.5Bi0.5TiO3: insights from first-principles calculations10.1039/C5TA03705K ↗
29. Accelerated materials design of Na0.5Bi0.5TiO3 oxygen ionic conductors based on first principles calculations10.1039/C5CP02181B ↗
30. Ceramic technology: oxide-ion conductors by design10.1038/35009177 ↗
31. Oxygen ion conductors10.1016/S1369-7021(03)00332-8 ↗
32. Factors controlling the oxide ion conductivity of fluorite and perovskite structured oxides10.1016/j.ssi.2004.07.036 ↗
33. Materials design of perovskite-based oxygen ion conductor by molecular dynamics method10.1016/S0167-2738(03)00154-1 ↗
34. Structural consideration on the ionic conductivity of perovskite-type oxides10.1016/S0167-2738(99)00066-1 ↗
35. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
36. Influence of A-site nonstoichiometry on sintering, microstructure and electrical properties of (Bi0.5Na0.5)TiO3 ceramics10.1016/j.matchemphys.2008.02.007 ↗
37. Electroceramics: characterization by impedance spectroscopy10.1002/adma.19900020304 ↗
38. Characterization of electrical materials, especially ferroelectrics, by impedance spectroscopy10.1023/A:1009950415758 ↗
39. Electrical properties of Ca-doped BiFeO3 ceramics: from p-type semiconduction to oxide-ion conduction10.1021/cm300683e ↗
40. Treatment of the impedance of mixed conductors equivalent circuit model and explicit approximate solutions10.1149/1.1392611 ↗