Attaining excellent piezoelectric properties and thermal stability in PIN-PHT ceramics by integrating tetragonal phase and relaxor ferroelectrics
Source abstract
Abstract
Herein, Nd 2 O 3 -doped 0.11PIN-0.89PHT (PIN-PHT) single-phase tetragonal piezoelectric ceramics are prepared by traditional solid-phase method. In addition, impacts of Nd-doping on crystal structure and electrical performance for 0.11PIN-0.89PHT ceramics are systematically investigated. Based on Landau theory, we propose a novel strategy for obtaining high-performance ceramics by combining tetragonal phase and relaxor ferroelectrics . Results reveal that the introduction of polar nano-regions in tetragonal phase ceramics by doping with rare-earth ions to convert normal ferroelectrics into relaxed ferroelectrics is responsible for excellent properties of 0.11PIN-0.89PHT- x Nd ceramics. The optimized comprehensive performance is obtained at x = 0.9 mol%, where d 33 = 670 pC/N, S max = 0.29% (45 kV/cm), strain hysteresis = 8.68% (45 kV/cm), d 33 * = 736 p.m./V (30 kV/cm), T C = 312.6 °C, ε r = 3234, k p = 0.62, tan δ = 0.014, and excellent high-temperature stability in temperature range of 20–240 °C. After 10 6 cycles, electrical properties and strain remain unchanged, showing excellent anti-fatigue behavior. This work provides a novel approach for the development of ceramics with outstanding piezoelectric response, high strain, low strain hysteresis, excellent anti-fatigue resistance and thermal stability, and is expected to realize practical applications of piezoelectric ceramics.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Multiferroics and related materials · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Piezo-catalysis for nondestructive tooth whitening10.1038/s41467-020-15015-3 ↗
2. Advantages and challenges of relaxor-PbTiO3 ferroelectric crystals for electroacoustic transducers - a review10.1016/j.pmatsci.2014.10.002 ↗
3. Morphotropic region and piezoelectric properties of xPb(In1/2Nb1/2)O3-(1-x)Pb(Hf1-yTiy)O3 ceramics10.1016/j.ceramint.2020.07.224 ↗
4. Coexisting multi-phase and relaxation behavior in high-performance lead-free piezoceramics10.1016/j.actamat.2022.118221 ↗
5. Enhanced strains by flexible nanoscale domain structure in BNKT-SBT relaxor ferroelectrics10.1039/D2TC01551J ↗
6. Grain size effects in Mn-modified 0.67BiFeO3-0.33BaTiO3 ceramics10.1021/acsami.1c16083 ↗
7. Progress in high-strain perovskite piezoelectric ceramics10.1016/j.mser.2018.08.001 ↗
8. Grain-size effects on dielectric and piezoelectric properties of poled BaTiO3 ceramics10.1016/j.actamat.2012.06.015 ↗
9. Giant piezoelectric coefficient of PNN-PZT-based relaxor piezoelectric ceramics by constructing an R-T MPB10.1016/j.ceramint.2021.01.079 ↗
10. Ultrahigh piezoelectricity in ferroelectric ceramics by design10.1038/s41563-018-0034-4 ↗
11. Large, thermally stabilized and fatigue-resistant piezoelectric strain response in textured relaxor-PbTiO3 ferroelectric ceramics10.1039/D0TC05023G ↗
12. Tetragonal (Ba, Ca) (Zr, Ti)O3 textured ceramics with enhanced piezoelectric response and superior temperature stability10.1016/j.jmat.2021.08.006 ↗
13. Enhanced temperature stability in <111> textured tetragonal Pb(Mg1/3Nb2/3)O3-PbTiO3 piezoelectric ceramics10.1063/1.4929958 ↗
14. Boosted piezoelectricity with excellent thermal stability in tetragonal NaNbO3-based ceramics10.1039/D0TA10470A ↗
15. Insights into the correlation between tetragonal phase and temperature stability of potassium sodium niobate based ceramics from domain behaviors10.1002/aelm.202100257 ↗
16. EXPGUI, a graphical user interface for GSAS10.1107/S0021889801002242 ↗
17. Giant electromechanical coupling of relaxor ferroelectrics controlled by polar nanoregion vibrations10.1126/sciadv.1501814 ↗
18. Superior electrostrictive effect in relaxor potassium sodium niobate based ferroelectrics10.1021/acsami.0c06131 ↗
19. Probing the coexistence of ferroelectric and relaxor states in Bi0.5Na0.5TiO3-based ceramics for enhanced piezoelectric performance10.1021/acsami.0c06666 ↗
20. Giant electrostrains accompanying the evolution of a relaxor behavior in Bi(Mg,Ti)O3–PbZrO3–PbTiO3 ferroelectric ceramics10.1016/j.actamat.2013.02.055 ↗
21. Exploring the high-performance (1-x)BaTiO3-xCaZrO3 piezoceramics with multiphase coexistence (R-O-T) from internal lattice distortion and domain features10.1016/j.jallcom.2020.157167 ↗
22. Superior lead-free high-temperature piezoceramics of BiFeO3-BaTiO3-(Bi0.5Na0.5)TiO3 through cooperative regulation10.1039/D3TA00158J ↗
23. Comprehensive properties and thermal stability of Ta2O5-doped PIN-PHT ceramics10.1016/j.ceramint.2022.07.219 ↗
24. A novel piezoelectric ceramic with high Curie temperature and high piezoelectric coefficient10.1016/j.ceramint.2019.11.089 ↗
25. Grain size effect on piezoelectric properties of BaTiO3 ceramics10.7567/JJAP.57.0902BB ↗
26. Domain contribution to dielectric properties of fine-grained BaTiO3 ceramics10.1143/JJAP.48.09KC01 ↗
27. Generalized curie-weiss law10.1103/PhysRevB.31.2851 ↗
28. Effect of Nd doping on the structural, optical and dielectric properties of BaTi0.95Sn0.05O3 ceramics
29. Enhancement of electric field-induced strain in BaTiO3 ceramics through grain size optimization10.1002/pssa.201431233 ↗
30. High piezoelectric coefficient in W6+-doped 0.08 Pb(In0.5Nb0.5)O3- 0.92 Pb(Hf0.47Ti0.53)O3 ceramic with enhanced thermal stability10.1016/j.ceramint.2021.07.107 ↗
31. Charge compensation mechanism decreases dielectric loss in manganese-doped Pb(Fe1/2Nb1/2)O3 ceramics10.1143/JJAP.43.2568 ↗
32. Piezoelectric actuators and motors: materials, designs, and applications10.1002/admt.201900716 ↗
33. Modified Pb(Mg1/3Nb2/3)O3-PbZrO3–PbTiO3 ceramics with high piezoelectricity and temperature stability10.1111/jace.17741 ↗
34. Large strain and reduced hysteresis of BiFeO3-xBaTiO3 lead-free ceramic via multiphase coexistence and relaxor behaviors10.1016/j.ceramint.2022.05.317 ↗
35. Lead-free piezoceramics with giant strain in the system Bi0.5Na0.5TiO3-BaTiO3-K0.5Na0.5NbO3. II. Temperature dependent properties
36. Lead-free piezoceramics with giant strain in the system Bi0.5Na0.5TiO3–BaTiO3–K0.5Na0.5NbO3. I. Structure and room temperature properties
37. Diffused phase transition boosts thermal stability of high‐performance lead‐free piezoelectrics10.1002/adfm.201504256 ↗
38. Preparation and enhanced electrical properties of grain-oriented (Bi1/2Na1/2)TiO3-based lead-free incipient piezoceramics10.1016/j.jeurceramsoc.2015.03.012 ↗
39. PMN-PT based quaternary piezoceramics with enhanced piezoelectricity and temperature stability10.1063/1.4875797 ↗
40. Microscopic insight into electric fatigue resistance and thermally stable piezoelectric properties of (K,Na)NbO3-based ceramics10.1021/acsami.8b08445 ↗
41. Exceptionally high piezoelectric coefficient and low strain hysteresis in grain-oriented (Ba, Ca)(Ti, Zr)O3 through integrating crystallographic texture and domain engineering10.1021/acsami.7b08160 ↗
42. Extremely large strain response under low driving electric fields in lead-based textured piezoelectric ceramics10.1016/j.ceramint.2022.09.262 ↗
43. Enhanced electromechanical properties and phase transition temperatures in [001] textured Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 ternary ceramics10.1063/1.4929688 ↗
44. Critical state to achieve a giant electric field-induced strain with a low hysteresis in relaxor piezoelectric ceramics10.1016/j.jmat.2021.01.007 ↗
45. High electrostrictive strain in lead-free relaxors near the morphotropic phase boundary10.1016/j.actamat.2019.10.034 ↗
46. Low sintering temperature, large strain and reduced strain hysteresis of BiFeO3–BaTiO3 ceramics for piezoelectric multilayer actuator applications10.1016/j.ceramint.2021.08.008 ↗
47. Large strain and low hysteresis in (0.64-x) Bi0.5Na0.5TiO3-0.36Sr0.7Bi0.2TiO3- x(K0.5La0.5)(Ti0.9Zr0.1)O3 piezoceramics10.1016/j.ceramint.2021.07.220 ↗
48. Designed morphotropic relaxor boundary ceramic exhibiting large electrostrain and negligible hysteresis10.1016/j.actamat.2021.116720 ↗
49. Large strain with low hysteresis in Bi4Ti3O12 modified Bi1/2(Na0.82K0.18)1/2TiO3 lead-free piezoceramics10.1016/j.jeurceramsoc.2018.05.028 ↗
50. Phase composition and piezoelectric properties of Pb(Sb1/2Nb1/2)-PbTiO3-PbZrO3 ceramics10.1007/s10854-018-8986-3 ↗
51. Electromechanical properties of Mn-doped Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 piezoelectric ceramics10.1016/j.ceramint.2016.06.175 ↗
52. Processing, structure, and electrical properties of MnO2-doped Pb(Yb1/2Nb1/2)0.10(Zr0.47Ti0.53)0.90O3 ceramics10.1016/j.ceramint.2012.10.054 ↗
53. Extremely high piezoelectric properties in Pb-based ceramics through integrating phase boundary and defect engineering10.1021/acsami.1c10298 ↗
54. Dielectric and piezoelectric properties of PMN-PT ceramics doped with strontium10.1016/j.ceramint.2017.11.029 ↗
55. Enhanced piezoelectric properties in new ternary ceramics CuO-doped PSN-PMN-PT by low-temperature sintering10.1016/j.ceramint.2020.12.060 ↗
56. Coexistence of excellent piezoelectric performance and high Curie temperature in KNN-based lead-free piezoelectric ceramics10.1016/j.jallcom.2020.156245 ↗
57. Lead-free piezoceramics10.1038/nature03028 ↗
58. Improved temperature stability and high piezoelectricity in lead-free barium titanate-based ceramics10.1016/j.jeurceramsoc.2018.08.004 ↗