journal article·2018-09

Photoluminescence enhancement of novel K(Y,Lu)CaWO6: Eu3+ red phosphor prepared by controllable citrate-EDTA complexing method

Quanbin Li, Le Zhang, Fangzheng Zhen, Shuai Wei, Wei Bu, Qing Yao, Zhigang Jiang, Hao Chen

Ceramics International· Volume 44· Issue 13
Publisher page

Abstract

Abstract Novel double-perovskite K(Y0.95-xLuxEu0.05)CaWO6 red phosphors were successfully prepared by the controllable citrate-EDTA complexing method. XRD with structure refinement, FTIR, Raman and photoluminescence spectra were combined to systematically investigate the structure parameters and luminescence properties of prepared phosphors. The substitution of Lu3+ with smaller ionic radius resulted in the lower symmetry even with the same space group of C2/m, which was also directly observed from the red shift and splitting of Raman T2 g(1) mode. The concentration higher than x = 0.6 made the intensity alteration in the excitation spectra from charge transfer band to 4f−4f of Eu3+. The obvious enhancements of red emission at 615 nm were obtained under both blue and ultraviolet lights, respectively, and reached almost the same intensity at x = 0.6. Meanwhile, the more standard red light could be found by the gradual shifts of CIE chromaticity coordinates and bigger ratio of red/orange emission. The substitution of Lu3+ improved the quality and emission intensity of red light of this double perovskite system and the composition optimized phosphor of K(Y0.35Lu0.6Eu0.05)CaWO6 exhibited great potential in the application of white LEDs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Perovskite Materials and Applications · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. A zero-thermal-quenching phosphor10.1038/nmat4843 ↗
2. Progress in discovery and structural design of color conversion phosphors for LEDs10.1016/j.pmatsci.2016.09.007 ↗
3. Luminescence of Ce3+ multicenters in Ca2+-Mg2+-Si4+ based garnet phosphors10.1016/j.jlumin.2018.03.058 ↗
4. Lanthanide-activated phosphors based on 4f-5d optical transitions: theoretical and experimental aspects10.1021/acs.chemrev.6b00691 ↗
5. N.C. George, K.A. Denault, R. Seshadri, Phosphors for solid-state white lighting, in: D.R. Clarke (Ed.) Annu Rev of Mater Res, Vol 43, Annual Reviews, Palo Alto, 43 (2013), pp. 481–501.10.1146/annurev-matsci-073012-125702 ↗
6. The design and preparation of the thermally stable, Mn4+ ion activated, narrow band, red emitting fluoride Na3GaF6: Mn4+ for warm WLED applications10.1039/C7TC00011A ↗
7. Recent developments in the new inorganic solid-state LED phosphors10.1039/C6DT01230B ↗
8. Highly efficient non-rare-earth red emitting phosphor for warm white light-emitting diodes10.1038/ncomms5312 ↗
9. Synthesis, luminescence and application of BaKYSi2O7:Eu2+: a new blue-emitting phosphor for near-UV white-light LED10.1016/j.ceramint.2018.02.022 ↗
10. Highly efficient and thermally stable K3AIF6:Mn4+ as a red phosphor for ultra-high-performance warm white light-emitting diodes10.1021/acsami.7b00749 ↗
11. New phosphors of beta-BaB2O4:re3+ (RE3+ = Eu3+, Tb3+)10.1016/j.jallcom.2018.02.337 ↗
12. Narrow red emission band fluoride phosphor knasif6:mn4+ for warm white light-emitting diodes10.1021/acsami.6b01905 ↗
13. A deep red phosphor Li2MgTiO4:Mn4+ exhibiting abnormal emission: potential application as color converter for warm w-LEDs10.1016/j.cej.2015.12.027 ↗
14. Red-emitting CaLa4(SiO4)3O:Eu3+ phosphor with superior thermal stability and high quantum efficiency for warm w-LEDs10.1016/j.jallcom.2016.10.211 ↗
15. An intense red-emitting phosphor Sr3Lu(PO4)3:Eu3+ for near ultraviolet light emitting diodes application10.1016/j.ceramint.2015.11.033 ↗
16. Broad near-ultraviolet and blue excitation band induced dazzling red emissions in Eu3+-activated Gd2MoO6 phosphors for white light-emitting diodes10.1039/C6RA25652J ↗
17. Sol-gel synthesis and luminescence properties of CaGd2(MoO4)4:Pr3+ phosphors for white LED applications10.1007/s10854-018-8864-z ↗
18. Site occupancy and photoluminescence properties of a novel deep-redemitting phosphor NaMgGdTeO6:Mn4+ with perovskite structure for w-LEDs10.1016/j.jlumin.2018.02.035 ↗
19. Preparation and luminescence properties of NaLa(WO4)2:Sm3+ orange-red phosphor10.1016/j.jlumin.2018.01.046 ↗
20. Synthesis and photoluminescence properties of NaLaMgWO6:re3+ (RE=Eu, Sm, Tb) phosphor for white LED application10.1016/j.materresbull.2012.03.023 ↗
21. Synthesis and photoluminescence properties of red-emitting NaLaMgWO6:Sm3+,Eu3+ phosphors for white LED applications10.1016/j.jlumin.2018.03.011 ↗
22. Thermally stable double perovskite CaLaMgSbO6:Eu3+ phosphors as a tunable LED-phosphor material10.1016/j.ceramint.2017.10.091 ↗
23. Synthesis of Dy3+ co-doped Bi4Si3O12:Sm3+ phosphors with enhanced red-emitting properties10.1016/j.ceramint.2017.08.174 ↗
24. Enhanced Luminescence of double perovskite Na(La,Gd)MgWO6: Eu3+ phosphor based on A-site-induced energy transfer10.1166/sam.2017.2318 ↗
25. Red-emitting double perovskite phosphors Sr1−xCaxLaMgSbO6:Eu3+: luminescence improvement based on composition modulation10.1016/j.ceramint.2017.08.216 ↗
26. Dual-channel enhanced luminescence of double perovskite NaGdMgWO6:Eu3+ phosphor based on alternative excitation and delayed quenching10.1016/j.jallcom.2015.04.109 ↗
27. Synthesis and photoluminescence of Eu3+-activated double perovskite NaGdMg(W, Mo)O6 - a potential red phosphor for solid state lighting10.1039/C2TC00189F ↗
28. Enhanced luminescence and structure evolution of double perovskite (K, Na)LaMgWO6:Eu3+ phosphor for white LEDs10.1007/s10854-015-3466-5 ↗
29. Novel layered perovskite Sr3Ti2O7:Eu3+ phosphor with high-efficiency luminescence enhanced by charge compensation10.1016/j.jallcom.2015.10.096 ↗
30. Gd2O3 assisted densification of high quantity (Y, Gd)AG: Ce ceramic solid solutions and their luminescence characteristics10.1016/j.ceramint.2018.02.096 ↗
31. Effect of NH4Cl flux used to synthesize double perovskite BaLaMgSbO6:Eu3+ phosphor by solid-state reaction method10.1007/s10854-016-5931-1 ↗
32. EXPGUI, a graphical user interface for GSAS10.1107/S0021889801002242 ↗
33. Magnetic and structural properties of NaLnMnWO6 and NaLnMgWO6 perovskites10.1016/j.jssc.2009.02.033 ↗
34. A-site cation ordering in AA'BB'O6 perovskites10.1016/j.jssc.2006.01.005 ↗
35. Synthesis and some properties of new zinc and rare-earth metal tungstates ZnRE4W3O1610.1016/j.solidstatesciences.2005.12.009 ↗
36. Vibrational characteristics of the alkali metal–indium double molybdates MIn(MoO4)2and tungstates MIn(WO4)2 (M=Li, Na, K, Cs)10.1006/jssc.1996.7248 ↗
37. Photoluminescence and raman spectra of double-perovskite Sr2Ca(Mo/W)O6 with A- and B-site substitutions of Eu3+10.1149/1.2898897 ↗
38. First-order Raman spectra of AB '1/2B ''1/2O3 double perovskites10.1103/PhysRevB.71.214307 ↗
39. Spontaneous Raman spectroscopy of tungstate and molybdate crystals for Raman lasers10.1016/S0925-3467(00)00037-9 ↗