Indium-free large area Nb-doped SnO2 thin film as an alternative transparent conducting electrode
Source abstract
Abstract
Abstract Niobium doped tin oxide (NTO) thin film deposited via facile chemical spray pyrolysis technique on to a large area (10 × 10 cm2) glass substrate exhibits better optical and electrical properties. The structural, surface, optical and electrical properties were analyzed by means of XRD, XPS, AFM, SEM-EDS, Hall Effect, and four-point probe techniques. The deposited NTO thin film was found to possess a maximum average transmittance value around 75% due to enhanced optical bandgap (3.77 eV) by Nb-dopant effect. The variation of sheet resistance of the large area (10 × 10 cm2) coated thin film over the entire region was studied at every 1 × 1 cm2 area. The film doped with 1.5 wt% of Nb content showed improved carrier concentration (9.33 × 1019 cm-3), higher free carrier mobility (39.4 cm2/V·s), improved electrical resistivity (1.69 × 10-3 Ω cm) and low sheet resistance (26.5 Ω/□). The temperature dependent electrical measurement was carried out from 200 to 450 °C in steps of 50 °C to understand the resistance stability of the film. In addition to these studies, we report the surface work function of NTO thin film to identify its suitability in optoelectronic devices. The estimated electrical properties confirm the substitution of Nb5+ in Sn site of SnO2 lattice. Our results indicate the optimized NTO thin film to possess promising optical and electrical transport properties to serve as a better indium-free alternate transparent conducting electrode in various optoelectronic devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. n-Type doped transparent conducting binary oxides: an overview10.1039/C6TC01881E ↗
2. Nano-branched transparent conducting oxides: beyond the brittleness limit for flexible electrode applications10.1039/c2nr32228e ↗
3. Band gap and work function tailoring of SnO2for improved transparent conducting ability in photovoltaics10.1039/C5TC04089B ↗
4. A facile route to vertically aligned electrospun SnO 2 nanowires on a transparent conducting oxide substrate for dye-sensitized solar cells10.1039/C1JM15047B ↗
5. Epitaxial Sb-doped SnO2and Sn-doped In2O3transparent conducting oxide contacts on GaN-based light emitting diodes10.1016/j.tsf.2015.09.022 ↗
6. Recent developments in the field of transparent conductive oxide films for spectral selective coatings, electronics and photovoltaics10.1016/j.cap.2012.07.022 ↗
7. Fiber laser annealing of brush-painted ITO nanoparticles for use as transparent anode for organic solar cells10.1016/j.ceramint.2016.06.001 ↗
8. Influencing FTO thin film growth with thin seeding layers: a route to microstructural modification10.1039/C5TC02144H ↗
9. Sputtering deposition of transparent conductive F-doped SnO2 (FTO) thin films in hydrogen-containing atmosphere10.1016/j.ceramint.2017.05.058 ↗
10. Highly conducting and transparent antimony doped tin oxide thin films: the role of sputtering power density10.1016/j.ceramint.2017.01.099 ↗
11. High-temperature charge transport and thermoelectric properties of a degenerately Al-doped ZnO nanocomposite10.1039/c2jm31763j ↗
12. Optimization of Zn2SnO4thin film by post oxidation of thermally evaporated alternate Sn and Zn metallic multi-layers10.1016/j.apsusc.2018.01.029 ↗
13. In situ formation and doping of Ag/SnO2electrical contact materials10.1016/j.jallcom.2017.04.288 ↗
14. Role of residual stress and texture of ZnO nanocrystals on electro-optical properties of ZnO/Ag/ZnO multilayer transparent conductors10.1016/j.jallcom.2017.11.028 ↗
15. A highly crystalline single Au wire network as a high temperature transparent heater10.1039/c4nr00869c ↗
16. Fabrication of large area, high-performance, transparent conducting electrodes using a spontaneously formed crackle network as template10.1002/admi.201400090 ↗
17. Optimization of silver nanowire-based transparent electrodes: effects of density, size and thermal annealing10.1039/C5NR04084A ↗
18. Fabrication and stability investigation of ultra-thin transparent and flexible Cu-Ag-Au tri-layer film on PET10.1063/1.5028844 ↗
19. Investigating the defect structures in transparent conducting oxides using X-ray and neutron scattering techniques10.3390/ma5050818 ↗
20. Electrical and optical properties of undoped and antimony-doped tin oxide films10.1063/1.327610 ↗
21. Enhanced electrical properties of antimony doped tin oxide thin films deposited via aerosol assisted chemical vapour deposition10.1039/C8TC01929K ↗
22. Effect of Nb doping on structural, electrical and optical properties of spray deposited SnO2thin films10.1016/j.spmi.2013.01.004 ↗
23. Strong interplay between dopant and SnO2in amorphous transparent (Sn, Nb)O2anode with high conductivity in electrochemical cycling10.1016/j.jallcom.2017.12.021 ↗
24. Facile deposition and characterization of large area highly conducting and transparent Sb-doped SnO2 thin film10.1016/j.apsusc.2019.05.079 ↗
25. Characterization of transparent and conductive electrodes of Nb-doped SnO2 thin film by pulsed laser deposition10.1016/j.cap.2010.11.070 ↗
26. Study of structural, electrical and photoconductive properties of F and P co-doped SnO2 transparent semiconducting thin film deposited by spray pyrolysis10.1016/j.mssp.2014.10.049 ↗
27. High figure of merit transparent conducting Sb-doped SnO2thin films prepared via ultrasonic spray pyrolysis10.1016/j.jallcom.2017.05.243 ↗
28. Exploring and controlling intrinsic defect formation in SnO2 thin films10.1039/C5TC03520A ↗
29. Growth and characterization of thermally evaporated ATO nanowires10.1016/j.tsf.2010.08.084 ↗
30. Carbon nanotube-based heterostructures for solar energy applications10.1039/c3cs60088b ↗
31. Template-oriented synthesis of monodispersed SnS2atSnO2 hetero-nanoflowers for Cr(VI) photoreduction10.1016/j.apcatb.2016.03.035 ↗
32. High performance dye-sensitized solar cells with record open circuit voltage using tin oxide nanoflowers developed by electrospinning10.1039/C1EE02703D ↗
33. SnO2-core carbon-shell composite nanotubes with enhanced photocurrent and photocatalytic performance
34. An investigation of doping of SnO2 by ion implantation and application of ion-implanted films as gas sensors10.1016/0040-6090(95)08156-9 ↗
35. Ultrasonic-vibration-assisted laser annealing of fluorine-doped tin oxide thin films for improving optical and electrical properties: overlapping rate optimization10.1016/j.ceramint.2018.08.342 ↗
36. Electron scattering mechanisms in indium-tin-oxide thin films prepared at the various process conditions10.1016/j.apsusc.2005.03.203 ↗
37. Effect of doping level on physical properties of antimony doped nanocrystalline tin oxide films fabricated using low cost spray technique10.1179/1743294410Y.0000000017 ↗
38. Sensing properties of sprayed antimony doped tin oxide thin films: solution molarity10.1016/j.jallcom.2010.12.012 ↗
39. Effect of F and Nb co-doping on structural, electrical and optical properties of spray deposited tin oxide thin films10.1016/j.tsf.2018.01.035 ↗
40. Shift of optical absorption edge in SnO2 films with high concentrations of nitrogen grown by chemical vapor deposition10.1063/1.4954693 ↗
41. Structural and physical properties of tin oxide thin films for optoelectronic applications10.1016/j.apsusc.2016.01.188 ↗
42. Investigations on the structural, optical and electrical properties of Nb-doped SnO2 thin films10.1007/s10853-011-5504-x ↗
43. Effect of oxygen vacancy on the structural and electronic characteristics of crystalline Zn2SnO410.1039/C4TC01366B ↗
44. Enhanced performance in polymer light emitting diodes using an indium-zinc-tin oxide transparent anode by the controlling of oxygen partial pressure at room temperature10.1039/c3tc30789a ↗
45. New figure of merit for transparent conductors10.1063/1.323240 ↗
46. Pyrosol process to deposit large-area SnO2:F thin films and its use as a transparent conducting substrate for CdTe solar cells10.1016/S0927-0248(00)00279-8 ↗
47. Electrical and mechanical properties of SnO2:Nb films for touch screens10.1016/S0042-207X(02)00156-2 ↗
48. Fabrication of antimony doped tin oxide (ATO) films by an inexpensive, simplified spray technique using perfume atomizer10.1016/j.matlet.2008.01.119 ↗
49. Investigations on the structural, optical and electrical properties of Nb-doped SnO2 thin films10.1007/s10853-011-5504-x ↗
50. Enhanced carrier generation in Nb-doped SnO 2 thin films grown on strain-inducing substrates10.1143/APEX.5.061201 ↗
51. Properties of Sb-doped SnO2transparent conductive thin films deposited by radio-frequency magnetron sputtering10.1016/j.tsf.2013.06.077 ↗
52. Effect of Ta doping on the characteristic features of spray-coated SnO210.1016/j.tsf.2015.10.011 ↗
53. Solution processed SnO 2 :Sb transparent conductive oxide as an alternative to indium tin oxide for applications in organic light emitting diodes10.1039/C5TC04117A ↗
54. Effect of Mn doping on the electrical and optical properties of SnO2thin films deposited by chemical spray pyrolysis technique10.1016/j.tsf.2015.12.008 ↗
55. Low-temperature conducting performance of transparent indium tin oxide/antimony tin oxide electrodes10.1016/j.ceramint.2017.02.006 ↗
56. Structural, morphological, optical and electrical properties of Sb-doped SnO2thin films obtained by aerosol assisted chemical vapor deposition10.1016/j.tsf.2017.07.017 ↗
57. Effect of Li doping on the structural, optical and electrical properties of spray deposited SnO2thin films10.1016/j.tsf.2009.04.047 ↗
58. Electrical and optical properties of tin oxide films doped with F and (Sb+F)10.1063/1.330619 ↗
59. Photoinduced conductivity in tin dioxide thin films10.1063/1.3126713 ↗
60. Scattering mechanisms of charge carriers in transparent conducting oxide films10.1007/BF01567122 ↗
61. High mobility transparent conducting oxides for thin film solar cells10.1016/j.tsf.2009.09.044 ↗
62. Scattering mechanism of transparent conducting tin oxide films prepared by magnetron sputtering10.1016/j.tsf.2006.07.020 ↗
63. The surface and materials science of tin oxide10.1016/j.progsurf.2005.09.002 ↗
64. Structural and electrical properties of SnO 2 fi lms grown on r-cut sapphire at different substrate temperature by MOCVD10.1016/j.vacuum.2013.05.011 ↗
65. Fabrication and characterization of ITO thin fi lm resistance temperature detector10.1016/j.vacuum.2016.07.028 ↗
66. Effect of nitrogen doping temperature on the resistance stability of ITO thin fi lms10.1016/j.jallcom.2018.11.126 ↗
67. Surface potentials of magnetron sputtered transparent conducting oxides10.1016/j.tsf.2009.05.057 ↗
68. Constructing 2D layered MoS 2 nanosheets-modified Z-scheme TiO 2 /WO 3 nanofibers ternary nanojunction with enhanced photocatalytic activity10.1016/j.apsusc.2017.06.308 ↗
69. Kelvin probe force microscopy and its application10.1016/j.surfrep.2010.10.001 ↗
70. The electrochromic and photocatalytic properties of electron beam evaporated vanadium-doped tungsten oxide thin films10.1016/j.solmat.2008.05.004 ↗
71. Characterization and optimization of indium tin oxide films for heterojunction solar cells10.1016/j.solmat.2011.04.012 ↗