A simple and efficient preparation of LaFeO3 nanopowders by glycine–nitrate process: Effect of glycine concentration
Source abstract
Abstract
Abstract LaFeO3 perovskites have been prepared by the glycine–nitrate process (GNP) at various glycine-to-nitrate molar ratios. The perovskites have been systematically characterized by X-ray diffraction, BET surface area, scanning electron microscopy, transmission electron microscopy and temperature-programmed reduction to study the effect of glycine concentration on various properties of LaFeO3. The X-ray diffraction patterns of the as-prepared and calcined samples show the formation of orthorhombic phase without any impurities. The BET specific surface areas of various perovskites increased with an increase in glycine-to-nitrate ratio (GNR) of 2.0 but were nearly constant at higher ratios. The scanning electron microscopy indicates that the prepared material is flake-like at GNRs ≤1.5 and exists as agglomerated particles at GNRs ≥2.0. The particle size of the as-prepared samples was in the range of 30–130 nm depending on the GNR and the calcined samples exhibited particle size in the range of 60–160 nm. The samples that were prepared at GNR
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Catalytic oxidation of 1,2-dichlorobenzene over ABO3-type perovskites10.1016/S0920-5861(00)00434-X ↗
2. Dry reforming of methane over LaNi1−yByO3±δ(B=Mg, Co) perovskites used as catalyst precursor10.1016/j.apcata.2007.10.010 ↗
3. Combined methane reforming in presence of CO2 and O2 over LaFe1−xCoxO3 mixed-oxide perovskites as catalysts precursors10.1016/j.cattod.2005.07.073 ↗
4. Ceramics in solid oxide fuel cells10.1016/S1359-0286(00)00034-6 ↗
5. A redox-stable efficient anode for solid-oxide fuel cells10.1038/nmat871 ↗
6. Oxide anode materials for solid oxide fuel cells10.1016/j.ssi.2006.07.012 ↗
7. Ferrite-based perovskites as cathode materials for anode-supported solid oxide fuel cells: Part I. Variation of composition10.1016/j.ssi.2005.03.009 ↗
8. Perovskite electrodes for sensors10.1016/0167-2738(92)90210-G ↗
9. Charge transport and magnetic properties in perovskites of the system La–Mn–O10.1016/S0167-2738(97)00153-7 ↗
10. Magnetic properties of Er(Co, Mn)O3 perovskites10.1016/j.jeurceramsoc.2007.02.064 ↗
11. Co0 from partial reduction of La(Co, Fe)O3 perovskites for Fischer–Tropsch synthesis10.1016/S0920-5861(03)00388-2 ↗
12. Comparison of LaFeO3, La0.8Sr0.2FeO3, and La0.8Sr0.2Fe0.9Co0.1O3 perovskite oxides as oxygen carrier for partial oxidation of methane10.1016/S1003-9953(09)60019-0 ↗
13. Production and properties of substituted LaFeO3–perovskite tubular membranes for partial oxidation of methane to syngas10.1016/j.jeurceramsoc.2006.10.004 ↗
14. Rare earth-first-row transition metal perovskites as catalysts for the autothermal reforming of hydrocarbon fuels to generate hydrogen10.1016/j.apcata.2007.10.018 ↗
15. Effect of Fe2O3 crystallite size on its mechanochemical reaction with La2O3 to form LaFeO310.1023/A:1017520806922 ↗
16. Synthesis of pure and Sr-doped LaGaO3, LaFeO3 and LaCoO3 and Sr, Mg-doped LaGaO3 for ITSOFC application using different wet chemical routes10.1016/j.matchemphys.2008.08.047 ↗
17. Study on the preparation of nanometer perovskite-type complex oxide LaFeO3 by sol–gel method10.1016/S0167-2991(06)81804-5 ↗
18. Nano-crystalline LaFeO3 powders synthesized by the citrate–gel method10.1016/j.matlet.2006.03.093 ↗
19. Auto-combustion synthesis of nanocrystalline LaFeO310.1016/S0254-0584(02)00341-3 ↗
20. Direct synthesis of iron oxide nanopowders by the combustion approach: reaction mechanism and properties10.1021/cm040061m ↗
21. Preparation and characterization of perovskite LaFeO3 nanocrystals10.1016/j.matlet.2005.12.015 ↗
22. Synthesis, characterisation, catalytic activity and structural stability of LaCo1-yFeyO3±λ perovskite catalysts for combustion of ethanol and propane10.1016/j.jcat.2006.03.020 ↗
23. A low temperature route to prepare LaFeO3 and LaCoO310.1016/j.matlet.2006.08.009 ↗
24. Effect of the preparation method on the catalytic activity of La1−xCaxFeO3 perovskite-type oxides10.1016/j.cattod.2007.11.011 ↗
25. Methanol oxidation on LaBO3 (B=Co, Mn, Fe) perovskite-type catalysts prepared by reactive grinding10.1016/j.apcata.2008.03.016 ↗
26. La, Ca and Fe oxide perovskites: preparation, characterization and catalytic properties for methane combustion10.1016/S0926-3373(01)00163-1 ↗
27. Synthesis and characterisation of La1−xCaxFeO3 perovskite-type oxide catalysts for total oxidation of volatile organic compounds10.1016/j.apcatb.2005.11.018 ↗
28. TPR and XRD study of ammonia synthesis catalysts10.1016/S0926-860X(96)00246-3 ↗